| Message ID | 20220112230247.982212-4-iwona.winiarska@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Introduce PECI subsystem | expand |
On Wed, 12 Jan 2022 at 23:04, Iwona Winiarska <iwona.winiarska@intel.com> wrote: > > Add PECI controller nodes with all required information. > > Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Reviewed-by: Joel Stanley <joel@jms.id.au> > --- > arch/arm/boot/dts/aspeed-g4.dtsi | 11 +++++++++++ > arch/arm/boot/dts/aspeed-g5.dtsi | 11 +++++++++++ > arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++ > 3 files changed, 33 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi > index b313a1cf5f73..3c2961da6272 100644 > --- a/arch/arm/boot/dts/aspeed-g4.dtsi > +++ b/arch/arm/boot/dts/aspeed-g4.dtsi > @@ -391,6 +391,17 @@ uart_routing: uart-routing@9c { > }; > }; > > + peci0: peci-controller@1e78b000 { > + compatible = "aspeed,ast2400-peci"; > + reg = <0x1e78b000 0x60>; > + interrupts = <15>; > + clocks = <&syscon ASPEED_CLK_GATE_REFCLK>; > + resets = <&syscon ASPEED_RESET_PECI>; > + cmd-timeout-ms = <1000>; > + clock-frequency = <1000000>; > + status = "disabled"; > + }; > + > uart2: serial@1e78d000 { > compatible = "ns16550a"; > reg = <0x1e78d000 0x20>; > diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi > index c7049454c7cb..aab1c3ecb4dc 100644 > --- a/arch/arm/boot/dts/aspeed-g5.dtsi > +++ b/arch/arm/boot/dts/aspeed-g5.dtsi > @@ -511,6 +511,17 @@ ibt: ibt@140 { > }; > }; > > + peci0: peci-controller@1e78b000 { > + compatible = "aspeed,ast2500-peci"; > + reg = <0x1e78b000 0x60>; > + interrupts = <15>; > + clocks = <&syscon ASPEED_CLK_GATE_REFCLK>; > + resets = <&syscon ASPEED_RESET_PECI>; > + cmd-timeout-ms = <1000>; > + clock-frequency = <1000000>; > + status = "disabled"; > + }; > + > uart2: serial@1e78d000 { > compatible = "ns16550a"; > reg = <0x1e78d000 0x20>; > diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi > index 5106a424f1ce..564f1292993f 100644 > --- a/arch/arm/boot/dts/aspeed-g6.dtsi > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi > @@ -507,6 +507,17 @@ wdt4: watchdog@1e7850c0 { > status = "disabled"; > }; > > + peci0: peci-controller@1e78b000 { > + compatible = "aspeed,ast2600-peci"; > + reg = <0x1e78b000 0x100>; > + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>; > + resets = <&syscon ASPEED_RESET_PECI>; > + cmd-timeout-ms = <1000>; > + clock-frequency = <1000000>; > + status = "disabled"; > + }; > + > lpc: lpc@1e789000 { > compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; > reg = <0x1e789000 0x1000>; > -- > 2.31.1 >
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index b313a1cf5f73..3c2961da6272 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -391,6 +391,17 @@ uart_routing: uart-routing@9c { }; }; + peci0: peci-controller@1e78b000 { + compatible = "aspeed,ast2400-peci"; + reg = <0x1e78b000 0x60>; + interrupts = <15>; + clocks = <&syscon ASPEED_CLK_GATE_REFCLK>; + resets = <&syscon ASPEED_RESET_PECI>; + cmd-timeout-ms = <1000>; + clock-frequency = <1000000>; + status = "disabled"; + }; + uart2: serial@1e78d000 { compatible = "ns16550a"; reg = <0x1e78d000 0x20>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index c7049454c7cb..aab1c3ecb4dc 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -511,6 +511,17 @@ ibt: ibt@140 { }; }; + peci0: peci-controller@1e78b000 { + compatible = "aspeed,ast2500-peci"; + reg = <0x1e78b000 0x60>; + interrupts = <15>; + clocks = <&syscon ASPEED_CLK_GATE_REFCLK>; + resets = <&syscon ASPEED_RESET_PECI>; + cmd-timeout-ms = <1000>; + clock-frequency = <1000000>; + status = "disabled"; + }; + uart2: serial@1e78d000 { compatible = "ns16550a"; reg = <0x1e78d000 0x20>; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 5106a424f1ce..564f1292993f 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -507,6 +507,17 @@ wdt4: watchdog@1e7850c0 { status = "disabled"; }; + peci0: peci-controller@1e78b000 { + compatible = "aspeed,ast2600-peci"; + reg = <0x1e78b000 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>; + resets = <&syscon ASPEED_RESET_PECI>; + cmd-timeout-ms = <1000>; + clock-frequency = <1000000>; + status = "disabled"; + }; + lpc: lpc@1e789000 { compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>;