@@ -27,4 +27,11 @@ config SOC_IMX8MM_BLK_CTRL
If you say yes here you get support for the NXP i.MX8MM BLK CTRL
support.
+config SOC_IMX8MN_BLK_CTRL
+ bool "i.MX8MN SoC BLK CTRL support"
+ depends on SOC_IMX8M
+ help
+ If you say yes here you get support for the NXP i.MX8MN BLK CTRL
+ support.
+
endmenu
@@ -7,3 +7,4 @@ obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
obj-$(CONFIG_SOC_IMX8MM_BLK_CTRL) += imx8mm-blk-ctrl.o
+obj-$(CONFIG_SOC_IMX8MN_BLK_CTRL) += imx8mn-blk-ctrl.o
@@ -6,8 +6,6 @@
#include <linux/of_device.h>
-#include <dt-bindings/power/imx8mn-power.h>
-
#include "imx8m-blk-ctrl.h"
static inline struct imx8m_blk_ctrl_domain *
@@ -322,94 +320,3 @@ static int imx8m_blk_ctrl_resume(struct device *dev)
const struct dev_pm_ops imx8m_blk_ctrl_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(imx8m_blk_ctrl_suspend, imx8m_blk_ctrl_resume)
};
-
-static int imx8mn_disp_power_notifier(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
- power_nb);
-
- if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
- return NOTIFY_OK;
-
- /* Enable bus clock and deassert bus reset */
- regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
- regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
-
- /*
- * On power up we have no software backchannel to the GPC to
- * wait for the ADB handshake to happen, so we just delay for a
- * bit. On power down the GPC driver waits for the handshake.
- */
- if (action == GENPD_NOTIFY_ON)
- udelay(5);
-
-
- return NOTIFY_OK;
-}
-
-static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
- [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
- .name = "dispblk-mipi-dsi",
- .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
- .num_clks = 2,
- .gpc_name = "mipi-dsi",
- .rst_mask = BIT(0) | BIT(1),
- .clk_mask = BIT(0) | BIT(1),
- .mipi_phy_rst_mask = BIT(17),
- },
- [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
- .name = "dispblk-mipi-csi",
- .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
- .num_clks = 2,
- .gpc_name = "mipi-csi",
- .rst_mask = BIT(2) | BIT(3),
- .clk_mask = BIT(2) | BIT(3),
- .mipi_phy_rst_mask = BIT(16),
- },
- [IMX8MN_DISPBLK_PD_LCDIF] = {
- .name = "dispblk-lcdif",
- .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
- .num_clks = 3,
- .gpc_name = "lcdif",
- .rst_mask = BIT(4) | BIT(5),
- .clk_mask = BIT(4) | BIT(5),
- },
- [IMX8MN_DISPBLK_PD_ISI] = {
- .name = "dispblk-isi",
- .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
- "disp_apb_root"},
- .num_clks = 4,
- .gpc_name = "isi",
- .rst_mask = BIT(6) | BIT(7),
- .clk_mask = BIT(6) | BIT(7),
- },
-};
-
-static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
- .max_reg = 0x84,
- .power_notifier_fn = imx8mn_disp_power_notifier,
- .domains = imx8mn_disp_blk_ctl_domain_data,
- .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
-};
-
-static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
- {
- .compatible = "fsl,imx8mn-disp-blk-ctrl",
- .data = &imx8mn_disp_blk_ctl_dev_data
- }, {
- /* Sentinel */
- }
-};
-MODULE_DEVICE_TABLE(of, imx8m_blk_ctrl_of_match);
-
-static struct platform_driver imx8m_blk_ctrl_driver = {
- .probe = imx8m_blk_ctrl_probe,
- .remove = imx8m_blk_ctrl_remove,
- .driver = {
- .name = "imx8m-blk-ctrl",
- .pm = &imx8m_blk_ctrl_pm_ops,
- .of_match_table = imx8m_blk_ctrl_of_match,
- },
-};
-module_platform_driver(imx8m_blk_ctrl_driver);
new file mode 100644
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright 2021 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ * Copyright 2022 NXP, Abel Vesa <abel.vesa@nxp.com>
+ */
+
+#include <dt-bindings/power/imx8mn-power.h>
+
+#include "imx8m-blk-ctrl.h"
+
+static int imx8mn_disp_power_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+ power_nb);
+
+ if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+ return NOTIFY_OK;
+
+ /* Enable bus clock and deassert bus reset */
+ regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
+ regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
+
+ /*
+ * On power up we have no software backchannel to the GPC to
+ * wait for the ADB handshake to happen, so we just delay for a
+ * bit. On power down the GPC driver waits for the handshake.
+ */
+ if (action == GENPD_NOTIFY_ON)
+ udelay(5);
+
+
+ return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
+ [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
+ .name = "dispblk-mipi-dsi",
+ .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
+ .num_clks = 2,
+ .gpc_name = "mipi-dsi",
+ .rst_mask = BIT(0) | BIT(1),
+ .clk_mask = BIT(0) | BIT(1),
+ .mipi_phy_rst_mask = BIT(17),
+ },
+ [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
+ .name = "dispblk-mipi-csi",
+ .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
+ .num_clks = 2,
+ .gpc_name = "mipi-csi",
+ .rst_mask = BIT(2) | BIT(3),
+ .clk_mask = BIT(2) | BIT(3),
+ .mipi_phy_rst_mask = BIT(16),
+ },
+ [IMX8MN_DISPBLK_PD_LCDIF] = {
+ .name = "dispblk-lcdif",
+ .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
+ .num_clks = 3,
+ .gpc_name = "lcdif",
+ .rst_mask = BIT(4) | BIT(5),
+ .clk_mask = BIT(4) | BIT(5),
+ },
+ [IMX8MN_DISPBLK_PD_ISI] = {
+ .name = "dispblk-isi",
+ .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
+ "disp_apb_root"},
+ .num_clks = 4,
+ .gpc_name = "isi",
+ .rst_mask = BIT(6) | BIT(7),
+ .clk_mask = BIT(6) | BIT(7),
+ },
+};
+
+static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
+ .max_reg = 0x84,
+ .power_notifier_fn = imx8mn_disp_power_notifier,
+ .domains = imx8mn_disp_blk_ctl_domain_data,
+ .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
+};
+
+static const struct of_device_id imx8mn_blk_ctrl_of_match[] = {
+ {
+ .compatible = "fsl,imx8mn-disp-blk-ctrl",
+ .data = &imx8mn_disp_blk_ctl_dev_data
+ }, {
+ /* Sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, imx8mn_blk_ctrl_of_match);
+
+static struct platform_driver imx8mn_blk_ctrl_driver = {
+ .probe = imx8m_blk_ctrl_probe,
+ .remove = imx8m_blk_ctrl_remove,
+ .driver = {
+ .name = "imx8mn-blk-ctrl",
+ .pm = &imx8m_blk_ctrl_pm_ops,
+ .of_match_table = imx8mn_blk_ctrl_of_match,
+ },
+};
+module_platform_driver(imx8mn_blk_ctrl_driver);
The imx8m-blk-ctrl driver was increasing in size with every new BLK CTRL addition for every SoC. Lets split the SoC specific parts into separate drivers. Do that for i.MX8MN now. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> --- drivers/soc/imx/Kconfig | 7 +++ drivers/soc/imx/Makefile | 1 + drivers/soc/imx/imx8m-blk-ctrl.c | 93 --------------------------- drivers/soc/imx/imx8mn-blk-ctrl.c | 101 ++++++++++++++++++++++++++++++ 4 files changed, 109 insertions(+), 93 deletions(-) create mode 100644 drivers/soc/imx/imx8mn-blk-ctrl.c