From patchwork Sun Jan 23 13:51:16 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frank Wunderlich X-Patchwork-Id: 12720965 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 9FD72C433F5 for ; Sun, 23 Jan 2022 13:52:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=l7y3gaB8Wtc0U/En1unyzYPn66QYC0JnuyDFy6ByJRY=; b=vwwR6VYSIwRGRh XN55OA+n20q1WkV0Tje8kJqf02p8Sr03QNxQ+dilH4azgfACM8Mbu56N35/ftZgZP1TuR1qd8dwdg 0cHArUQgGkUW9+ffEaRn1a0RyDS2jOfWcgPnHDINmQVJ4nl9oX61lzbvPHeO9A9NamzYlVcfTcP3c pSGHOsr69eEK71pvHMedusrBeBhqvCgqKFBdB/qdoDN1hkQbRoHuGSMzuIg5afmrfAlGv68F/9wlj EMOPrN86IKrwmGYSEgmT1mO0rlgra1Cvtv0qWhz0xtR4CGf/Ggkc7B/055zBeA68L6Orf01b70CIk eR+HEPa93oQ0MXeHseuQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nBdHO-000uLq-4j; Sun, 23 Jan 2022 13:51:38 +0000 Received: from mxout3.routing.net ([2a03:2900:1:a::8]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nBdHA-000uHj-7y; Sun, 23 Jan 2022 13:51:27 +0000 Received: from mxbox1.masterlogin.de (unknown [192.168.10.88]) by mxout3.routing.net (Postfix) with ESMTP id 71BBC6049F; Sun, 23 Jan 2022 13:51:22 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mailerdienst.de; s=20200217; t=1642945882; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=w+3tkzWHqbrEKY/X50SkMr4zrCaGJQm2/m+rJu8LSA8=; b=ZnzAiblxx7KD3v2as8JltxACXLt8njXFjrmfVo1xDILKUdyiGtDOWeF5fNc3BnAPgXs5Dm Zufg9JNIZdfmiyBOSFXbccI+gLAnbiyZc1NPB3hupoRXqcptoaLXUpZ/ODmIHcgNX2IJhi Jkr62OQBOlaOC1f9TMRLT8lYZRAdrSE= Received: from localhost.localdomain (fttx-pool-80.245.79.232.bambit.de [80.245.79.232]) by mxbox1.masterlogin.de (Postfix) with ESMTPSA id BEF27400CA; Sun, 23 Jan 2022 13:51:21 +0000 (UTC) From: Frank Wunderlich To: linux-rockchip@lists.infradead.org Cc: Frank Wunderlich , Rob Herring , Heiko Stuebner , Peter Geis , Johan Jonker , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/2] arm64: dts: rockchip: Add Bananapi R2 Pro Date: Sun, 23 Jan 2022 14:51:16 +0100 Message-Id: <20220123135116.136846-3-linux@fw-web.de> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220123135116.136846-1-linux@fw-web.de> References: <20220123135116.136846-1-linux@fw-web.de> MIME-Version: 1.0 X-Mail-ID: e411d64f-6419-4852-8efd-0c7b78cce6fe X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220123_055124_617737_D47E9A79 X-CRM114-Status: GOOD ( 17.49 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org From: Frank Wunderlich This patch adds Devicetree for Bananapi R2 Pro based on RK3568. Add uart/sd/emmc/i2c/rk809/tsadc nodes for basic function. Gmac0 is directly connected to wan-port so usable without additional driver. On gmac1 there is a switch (rtl8367rb) connected which have not yet a driver in mainline. Patch also prepares nodes for GPIO header. Co-developed-by: Peter Geis Signed-off-by: Peter Geis Signed-off-by: Frank Wunderlich --- changes in v2: - drop alias for gmac1 - currently unused due to missing switch driver - verified / changed pinctrl of pwm/spi/uart/i2c - add sharing information for con2 functions - always power on vccio1 iodomain (used for rtc) - drop V00 from model - change leds (change names, drop label, add pinctrl, use color+function) - add fan --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 461 ++++++++++++++++++ 2 files changed, 462 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 479906f3ad7b..70007b370d87 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -58,3 +58,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts new file mode 100644 index 000000000000..738b62adbef8 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Author: Frank Wunderlich + * + */ + +/dts-v1/; +#include +#include +#include +#include "rk3568.dtsi" + +/ { + model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; + compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + bootargs = "earlycon=uart8250,mmio32,0xfe660000"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&blue_led_pin &green_led_pin>; + + blue_led: led-0 { + color = ; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; + }; + + green_led: led-1 { + color = ; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + clock_in_out = "input"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + + tx_delay = <0x3c>; + rx_delay = <0x2f>; + + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c5 { + /* pin 3 (SDA) + 4 (SCL) of header con2 */ + status = "disabled"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&pinctrl { + leds { + blue_led_pin: blue-led-pin { + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + green_led_pin: green-led-pin { + rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm8 { + /* fan 5v - gnd - pwm */ + status = "okay"; +}; + +&pwm10 { + /* pin 7 of header con2 */ + status = "disabled"; +}; + +&pwm11 { + /* pin 15 of header con2 */ + status = "disabled"; +}; + +&pwm12 { + /* pin 21 of header con2 */ + /* shared with uart9 + spi3 */ + pinctrl-0 = <&pwm12m1_pins>; + status = "disabled"; +}; + +&pwm13 { + /* pin 24 of header con2 */ + /* shared with uart9 */ + pinctrl-0 = <&pwm13m1_pins>; + status = "disabled"; +}; + +&pwm14 { + /* pin 23 of header con2 */ + /* shared with spi3 */ + pinctrl-0 = <&pwm14m1_pins>; + status = "disabled"; +}; + +&pwm15 { + /* pin 19 of header con2 */ + /* shared with spi3 */ + pinctrl-0 = <&pwm15m1_pins>; + status = "disabled"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&spi3 { + /* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */ + /* shared with pwm12/14/15 and uart9 */ + pinctrl-0 = <&spi3m1_pins>; + status = "disabled"; +}; + +&tsadc { + status = "okay"; +}; + +&uart0 { + /* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */ + status = "disabled"; +}; + +&uart2 { + /* debug-uart */ + status = "okay"; +}; + +&uart7 { + /* pin 11 (TX) + 13 (RX) of header con2 */ + pinctrl-0 = <&uart7m1_xfer>; + status = "disabled"; +}; + +&uart9 { + /* pin 21 (TX) + 24 (RX) of header con2 */ + /* shared with pwm13 and pwm12/spi3 */ + pinctrl-0 = <&uart9m1_xfer>; + status = "disabled"; +};