diff mbox series

[v2,3/4] arm64: dts: mediatek: mt8195: add efuse node and cells

Message ID 20220128062902.26273-3-chunfeng.yun@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/4] dt-bindings: usb: mtk-xhci: add support ip-sleep for mt8195 | expand

Commit Message

Chunfeng Yun Jan. 28, 2022, 6:29 a.m. UTC
Add efuse node and cells used by t-phy to fix the bit shift issue

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: use hw auto load for u2phy which has no this issue

Note:

 depend on the reviewing patch:

[v9,3/3] arm64: dts: Add mediatek SoC mt8195 and evaluation board
https://patchwork.kernel.org/patch/12711296
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 55 ++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

Comments

AngeloGioacchino Del Regno Jan. 31, 2022, 9:57 a.m. UTC | #1
Il 28/01/22 07:29, Chunfeng Yun ha scritto:
> Add efuse node and cells used by t-phy to fix the bit shift issue
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Greg Kroah-Hartman Feb. 11, 2022, 10:17 a.m. UTC | #2
On Fri, Jan 28, 2022 at 02:29:01PM +0800, Chunfeng Yun wrote:
> Add efuse node and cells used by t-phy to fix the bit shift issue
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2: use hw auto load for u2phy which has no this issue
> 
> Note:
> 
>  depend on the reviewing patch:
> 
> [v9,3/3] arm64: dts: Add mediatek SoC mt8195 and evaluation board
> https://patchwork.kernel.org/patch/12711296

As I don't have that in my tree, I can only take the first 2 patches
here now, thanks.

greg k-h
Macpaul Lin May 10, 2022, 3:36 a.m. UTC | #3
On Wed, 2022-02-16 at 17:38 +0800, Macpaul Lin wrote:
> 
> On 2/11/22 6:17 PM, Greg Kroah-Hartman wrote:
> > On Fri, Jan 28, 2022 at 02:29:01PM +0800, Chunfeng Yun wrote:
> > > Add efuse node and cells used by t-phy to fix the bit shift issue
> > > 
> > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > > ---
> > > v2: use hw auto load for u2phy which has no this issue
> > > 
> > > Note:
> > > 
> > >   depend on the reviewing patch:
> > > 
> > > [v9,3/3] arm64: dts: Add mediatek SoC mt8195 and evaluation board
> > > 
https://urldefense.com/v3/__https://patchwork.kernel.org/patch/12711296__;!!CTRNKA9wMg0ARbw!0Jg8kLN4kBw0LcbiAH1HYTq2uQ5VwiD-CE8yoFBD7oApn8YNSdmVpwSdY1q2C7LvY6c$
> > 
> > As I don't have that in my tree, I can only take the first 2
> > patches
> > here now, thanks.
> > 
> > greg k-h
> > 
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > 

Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>

This patch has been
tested with:
 - "for-next" branch in MediaTek tree [1].

https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux.git 
 - added more debug log to confirm efuse probing status at my local.
  -
If probe success, it won't show any log.

Thanks
Macpaul Lin
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index a363e82f6988..240a21708806 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -695,6 +695,53 @@ 
 			status = "disabled";
 		};
 
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u3_tx_imp_p0: usb3-tx-imp@184 {
+				reg = <0x184 0x1>;
+				bits = <0 5>;
+			};
+			u3_rx_imp_p0: usb3-rx-imp@184 {
+				reg = <0x184 0x2>;
+				bits = <5 5>;
+			};
+			u3_intr_p0: usb3-intr@185 {
+				reg = <0x185 0x1>;
+				bits = <2 6>;
+			};
+			comb_tx_imp_p1: usb3-tx-imp@186 {
+				reg = <0x186 0x1>;
+				bits = <0 5>;
+			};
+			comb_rx_imp_p1: usb3-rx-imp@186 {
+				reg = <0x186 0x2>;
+				bits = <5 5>;
+			};
+			comb_intr_p1: usb3-intr@187 {
+				reg = <0x187 0x1>;
+				bits = <2 6>;
+			};
+			u2_intr_p0: usb2-intr-p0@188 {
+				reg = <0x188 0x1>;
+				bits = <0 5>;
+			};
+			u2_intr_p1: usb2-intr-p1@188 {
+				reg = <0x188 0x2>;
+				bits = <5 5>;
+			};
+			u2_intr_p2: usb2-intr-p2@189 {
+				reg = <0x189 0x1>;
+				bits = <2 5>;
+			};
+			u2_intr_p3: usb2-intr-p3@189 {
+				reg = <0x189 0x2>;
+				bits = <7 5>;
+			};
+		};
+
 		u3phy2: t-phy@11c40000 {
 			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
 			#address-cells = <1>;
@@ -877,6 +924,10 @@ 
 				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
 					 <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
 				clock-names = "ref", "da_ref";
+				nvmem-cells = <&comb_intr_p1>,
+					      <&comb_rx_imp_p1>,
+					      <&comb_tx_imp_p1>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
 				#phy-cells = <1>;
 			};
 		};
@@ -901,6 +952,10 @@ 
 				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
 					 <&topckgen CLK_TOP_SSUSB_PHY_REF>;
 				clock-names = "ref", "da_ref";
+				nvmem-cells = <&u3_intr_p0>,
+					      <&u3_rx_imp_p0>,
+					      <&u3_tx_imp_p0>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
 				#phy-cells = <1>;
 			};
 		};