diff mbox series

[1/2] arm64: dts: rockchip: fix vcc3v3_lcd{0, 1}_n regulators in rk3568-evb1-10

Message ID 20220129162440.5415-1-michael.riesch@wolfvision.net (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: rockchip: fix vcc3v3_lcd{0, 1}_n regulators in rk3568-evb1-10 | expand

Commit Message

Michael Riesch Jan. 29, 2022, 4:24 p.m. UTC 
The voltages VCC3V3_LCD{0,1} can be enabled with the pins GPIO0_C7 and
GPIO0_C5, respectively. This patch modifies the device tree in order to
reflect this.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 25 +++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

Comments

Heiko Stuebner Jan. 29, 2022, 5:57 p.m. UTC | #1 
On Sat, 29 Jan 2022 17:24:39 +0100, Michael Riesch wrote:
> The voltages VCC3V3_LCD{0,1} can be enabled with the pins GPIO0_C7 and
> GPIO0_C5, respectively. This patch modifies the device tree in order to
> reflect this.

Applied, thanks!

[1/2] arm64: dts: rockchip: fix vcc3v3_lcd{0,1}_n regulators in rk3568-evb1-10
      commit: 9ade1ab4d85f5fc31a5d6cf5147702ed5c1b5b10
[2/2] arm64: dts: rockchip: add the touchscreen controller to rk3568-evb1-v10
      commit: 922237a6c211d9fe46b5dfb56307872cdced386d

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416a..197aaf7ee348 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -56,7 +56,13 @@  vcc5v0_sys: vcc5v0-sys {
 	vcc3v3_lcd0_n: vcc3v3-lcd0-n {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_lcd0_n";
-		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc3v3_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_lcd0_n_en>;
 
 		regulator-state-mem {
 			regulator-off-in-suspend;
@@ -66,7 +72,13 @@  regulator-state-mem {
 	vcc3v3_lcd1_n: vcc3v3-lcd1-n {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_lcd1_n";
-		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc3v3_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_lcd1_n_en>;
 
 		regulator-state-mem {
 			regulator-off-in-suspend;
@@ -339,6 +351,15 @@  rgmii_phy1: ethernet-phy@0 {
 };
 
 &pinctrl {
+	display {
+		vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en {
+			rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>;
+		};
+		vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en {
+			rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic_int {
 			rockchip,pins =