diff mbox series

[v2,2/2] arm64: dts: ti: k3-am65*: remove #address-cells/#size-cells from flash nodes

Message ID 20220203140240.973690-2-matthias.schiffer@ew.tq-group.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/2] arm64: dts: ti: k3-am65: disable optional peripherals by default | expand

Commit Message

Matthias Schiffer Feb. 3, 2022, 2:02 p.m. UTC 
Specifying partitions directly in the flash node is deprecated, a
fixed-partitions node should be used instead. Therefore, it doesn't make
sense to have these properties in the flash nodes.

Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 --
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts     | 8 ++------
 2 files changed, 2 insertions(+), 8 deletions(-)

v2: no changes, added Jan's Acked-by
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 873c123c611ed..7eca697e1ca14 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -623,8 +623,6 @@  flash@0 {
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 821ee7f2eff04..9c06da9d6d8f7 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -340,14 +340,12 @@  &main_spi0 {
 	ti,pindir-d0-out-d1-in;
 	status = "okay";
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 		spi-max-frequency = <48000000>;
-		#address-cells = <1>;
-		#size-cells= <1>;
 	};
 };
 
@@ -442,7 +440,7 @@  &ospi0 {
 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
 	status = "okay";
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
@@ -453,8 +451,6 @@  flash@0{
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };