| Message ID | 20220224103030.2040048-1-michael@walle.cc (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/2] arm64: dts: imx8mn-evk: use proper names for PMIC outputs | expand |
HI, Am Do., 24. Feb. 2022 um 11:30 Uhr schrieb Michael Walle <michael@walle.cc>: > > Use the power signal names as given in the schematics of the reference > board. > > Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com> > --- > Changes since v1: > - swap buck1 and buck2 > > arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts > index b4225cfcb6d9..2b685c0c7eeb 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts > @@ -41,7 +41,7 @@ pmic: pmic@25 { > > regulators { > buck1: BUCK1{ > - regulator-name = "BUCK1"; > + regulator-name = "VDD_SOC"; > regulator-min-microvolt = <600000>; > regulator-max-microvolt = <2187500>; > regulator-boot-on; > @@ -50,7 +50,7 @@ buck1: BUCK1{ > }; > > buck2: BUCK2 { > - regulator-name = "BUCK2"; > + regulator-name = "VDD_ARM_0V9"; > regulator-min-microvolt = <600000>; > regulator-max-microvolt = <2187500>; > regulator-boot-on; > @@ -61,7 +61,7 @@ buck2: BUCK2 { > }; > > buck4: BUCK4{ > - regulator-name = "BUCK4"; > + regulator-name = "VDD_3V3"; > regulator-min-microvolt = <600000>; > regulator-max-microvolt = <3400000>; > regulator-boot-on; > @@ -69,7 +69,7 @@ buck4: BUCK4{ > }; > > buck5: BUCK5{ > - regulator-name = "BUCK5"; > + regulator-name = "VDD_1V8"; > regulator-min-microvolt = <600000>; > regulator-max-microvolt = <3400000>; > regulator-boot-on; > @@ -77,7 +77,7 @@ buck5: BUCK5{ > }; > > buck6: BUCK6 { > - regulator-name = "BUCK6"; > + regulator-name = "NVCC_DRAM_1V1"; > regulator-min-microvolt = <600000>; > regulator-max-microvolt = <3400000>; > regulator-boot-on; > @@ -85,7 +85,7 @@ buck6: BUCK6 { > }; > > ldo1: LDO1 { > - regulator-name = "LDO1"; > + regulator-name = "NVCC_SNVS_1V8"; > regulator-min-microvolt = <1600000>; > regulator-max-microvolt = <3300000>; > regulator-boot-on; > @@ -93,7 +93,7 @@ ldo1: LDO1 { > }; > > ldo2: LDO2 { > - regulator-name = "LDO2"; > + regulator-name = "VDD_SNVS_0V8"; > regulator-min-microvolt = <800000>; > regulator-max-microvolt = <1150000>; > regulator-boot-on; > @@ -101,7 +101,7 @@ ldo2: LDO2 { > }; > > ldo3: LDO3 { > - regulator-name = "LDO3"; > + regulator-name = "VDDA_1V8"; > regulator-min-microvolt = <800000>; > regulator-max-microvolt = <3300000>; > regulator-boot-on; > @@ -109,7 +109,7 @@ ldo3: LDO3 { > }; > > ldo4: LDO4 { > - regulator-name = "LDO4"; > + regulator-name = "VDD_PHY_1V2"; > regulator-min-microvolt = <800000>; > regulator-max-microvolt = <3300000>; > regulator-boot-on; > @@ -117,7 +117,7 @@ ldo4: LDO4 { > }; > > ldo5: LDO5 { > - regulator-name = "LDO5"; > + regulator-name = "NVCC_SD2"; > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <3300000>; > regulator-boot-on; > -- > 2.30.2 >
Hi Michael, On Thu, Feb 24, 2022 at 7:30 AM Michael Walle <michael@walle.cc> wrote: > > Use the power signal names as given in the schematics of the reference > board. > > Signed-off-by: Michael Walle <michael@walle.cc> > --- > Changes since v1: > - swap buck1 and buck2 Reviewed-by: Fabio Estevam <festevam@gmail.com>
Hi, Am 2022-02-24 11:30, schrieb Michael Walle: > Use the power signal names as given in the schematics of the reference > board. > > Signed-off-by: Michael Walle <michael@walle.cc> Any news here? -michael
On Thu, Feb 24, 2022 at 11:30:29AM +0100, Michael Walle wrote: > Use the power signal names as given in the schematics of the reference > board. > > Signed-off-by: Michael Walle <michael@walle.cc> Applied both, thanks!
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts index b4225cfcb6d9..2b685c0c7eeb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -41,7 +41,7 @@ pmic: pmic@25 { regulators { buck1: BUCK1{ - regulator-name = "BUCK1"; + regulator-name = "VDD_SOC"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <2187500>; regulator-boot-on; @@ -50,7 +50,7 @@ buck1: BUCK1{ }; buck2: BUCK2 { - regulator-name = "BUCK2"; + regulator-name = "VDD_ARM_0V9"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <2187500>; regulator-boot-on; @@ -61,7 +61,7 @@ buck2: BUCK2 { }; buck4: BUCK4{ - regulator-name = "BUCK4"; + regulator-name = "VDD_3V3"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -69,7 +69,7 @@ buck4: BUCK4{ }; buck5: BUCK5{ - regulator-name = "BUCK5"; + regulator-name = "VDD_1V8"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -77,7 +77,7 @@ buck5: BUCK5{ }; buck6: BUCK6 { - regulator-name = "BUCK6"; + regulator-name = "NVCC_DRAM_1V1"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <3400000>; regulator-boot-on; @@ -85,7 +85,7 @@ buck6: BUCK6 { }; ldo1: LDO1 { - regulator-name = "LDO1"; + regulator-name = "NVCC_SNVS_1V8"; regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -93,7 +93,7 @@ ldo1: LDO1 { }; ldo2: LDO2 { - regulator-name = "LDO2"; + regulator-name = "VDD_SNVS_0V8"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1150000>; regulator-boot-on; @@ -101,7 +101,7 @@ ldo2: LDO2 { }; ldo3: LDO3 { - regulator-name = "LDO3"; + regulator-name = "VDDA_1V8"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -109,7 +109,7 @@ ldo3: LDO3 { }; ldo4: LDO4 { - regulator-name = "LDO4"; + regulator-name = "VDD_PHY_1V2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -117,7 +117,7 @@ ldo4: LDO4 { }; ldo5: LDO5 { - regulator-name = "LDO5"; + regulator-name = "NVCC_SD2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on;
Use the power signal names as given in the schematics of the reference board. Signed-off-by: Michael Walle <michael@walle.cc> --- Changes since v1: - swap buck1 and buck2 arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)