diff mbox series

[v2,3/7] ARM: dts: lan966x: add missing uart DMA channel

Message ID 20220304153548.3364480-4-michael@walle.cc (mailing list archive)
State New, archived
Headers show
Series ARM: dts: lan966x: dtsi improvements and KSwitch D10 support | expand

Commit Message

Michael Walle March 4, 2022, 3:35 p.m. UTC 
The usart node of the flexcom3 block is missing the DMA channels. Add
it.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 arch/arm/boot/dts/lan966x.dtsi | 3 +++
 1 file changed, 3 insertions(+)

Comments

Claudiu Beznea March 30, 2022, 1:25 p.m. UTC | #1 
On 04.03.2022 17:35, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> The usart node of the flexcom3 block is missing the DMA channels. Add
> it.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>


> ---
>  arch/arm/boot/dts/lan966x.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
> index 39dfdb8e29ed..230de3bdd5f1 100644
> --- a/arch/arm/boot/dts/lan966x.dtsi
> +++ b/arch/arm/boot/dts/lan966x.dtsi
> @@ -144,6 +144,9 @@ usart3: serial@200 {
>                                 compatible = "atmel,at91sam9260-usart";
>                                 reg = <0x200 0x200>;
>                                 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> +                               dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
> +                                      <&dma0 AT91_XDMAC_DT_PERID(8)>;
> +                               dma-names = "tx", "rx";
>                                 clocks = <&nic_clk>;
>                                 clock-names = "usart";
>                                 atmel,fifo-size = <32>;
> --
> 2.30.2
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 39dfdb8e29ed..230de3bdd5f1 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -144,6 +144,9 @@  usart3: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
 				clocks = <&nic_clk>;
 				clock-names = "usart";
 				atmel,fifo-size = <32>;