diff mbox series

ARM: dts: aspeed: add Nuvia DC-SCM BMC

Message ID 20220324164551.359570-1-quic_jaehyoo@quicinc.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: aspeed: add Nuvia DC-SCM BMC | expand

Commit Message

Jae Hyun Yoo March 24, 2022, 4:45 p.m. UTC 
From: Graeme Gregory <quic_ggregory@quicinc.com>

Add initial version of device tree for Nuvia DC-SCM BMC which is
equipped with Aspeed AST2600 BMC SoC.

Signed-off-by: Graeme Gregory <quic_ggregory@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts | 188 ++++++++++++++++++
 2 files changed, 189 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts

Comments

Andrew Lunn March 24, 2022, 9:23 p.m. UTC | #1 
On Thu, Mar 24, 2022 at 09:45:51AM -0700, Jae Hyun Yoo wrote:
> From: Graeme Gregory <quic_ggregory@quicinc.com>
> 
> +&mac2 {
> +	status = "okay";
> +
> +	phy-mode = "rgmii";

Are you sure about this? That PHY are you using? It is more normal to
use rgmii-id.

    Andrew
Jae Hyun Yoo March 24, 2022, 9:27 p.m. UTC | #2 
Hi Andrew,

On 3/24/2022 2:23 PM, Andrew Lunn wrote:
> On Thu, Mar 24, 2022 at 09:45:51AM -0700, Jae Hyun Yoo wrote:
>> From: Graeme Gregory <quic_ggregory@quicinc.com>
>>
>> +&mac2 {
>> +	status = "okay";
>> +
>> +	phy-mode = "rgmii";
> 
> Are you sure about this? That PHY are you using? It is more normal to
> use rgmii-id.

Yes, I'm sure. PHY works with rgmii on my board. I picked a different
clock delay setting too.

Thanks,
Jae
Andrew Lunn March 24, 2022, 10:19 p.m. UTC | #3 
On Thu, Mar 24, 2022 at 02:27:34PM -0700, Jae Hyun Yoo wrote:
> Hi Andrew,
> 
> On 3/24/2022 2:23 PM, Andrew Lunn wrote:
> > On Thu, Mar 24, 2022 at 09:45:51AM -0700, Jae Hyun Yoo wrote:
> > > From: Graeme Gregory <quic_ggregory@quicinc.com>
> > > 
> > > +&mac2 {
> > > +	status = "okay";
> > > +
> > > +	phy-mode = "rgmii";
> > 
> > Are you sure about this? That PHY are you using? It is more normal to
> > use rgmii-id.
> 
> Yes, I'm sure. PHY works with rgmii on my board. I picked a different
> clock delay setting too.

Do you know who is inserting the delay? It looks like rgmii will be
passed to the PHY. So there are few possibilities here:

The MAC is adding the delay. Not recommended, but does work. In that
case, your DT is correct.

The bootloader or strapping configures the PHY to insert the
delay. The PHY driver then ignores 'rgmii' and leaves the
configuration alone. This will break sometime in the future when
somebody fixes the PHY driver to actually set the PHY to rgmii as
requested. In this case, both the PHY driver and your DT is broken.

The board itself inserts the delays by having long tracks. In this
case, your DT is correct.

It would be good to understand this, just in case it is the second
condition.

      Andrew
Jae Hyun Yoo March 24, 2022, 10:40 p.m. UTC | #4 
On 3/24/2022 3:19 PM, Andrew Lunn wrote:
> On Thu, Mar 24, 2022 at 02:27:34PM -0700, Jae Hyun Yoo wrote:
>> Hi Andrew,
>>
>> On 3/24/2022 2:23 PM, Andrew Lunn wrote:
>>> On Thu, Mar 24, 2022 at 09:45:51AM -0700, Jae Hyun Yoo wrote:
>>>> From: Graeme Gregory <quic_ggregory@quicinc.com>
>>>>
>>>> +&mac2 {
>>>> +	status = "okay";
>>>> +
>>>> +	phy-mode = "rgmii";
>>>
>>> Are you sure about this? That PHY are you using? It is more normal to
>>> use rgmii-id.
>>
>> Yes, I'm sure. PHY works with rgmii on my board. I picked a different
>> clock delay setting too.
> 
> Do you know who is inserting the delay? It looks like rgmii will be
> passed to the PHY. So there are few possibilities here:
> 
> The MAC is adding the delay. Not recommended, but does work. In that
> case, your DT is correct.
> 
> The bootloader or strapping configures the PHY to insert the
> delay. The PHY driver then ignores 'rgmii' and leaves the
> configuration alone. This will break sometime in the future when
> somebody fixes the PHY driver to actually set the PHY to rgmii as
> requested. In this case, both the PHY driver and your DT is broken.
> 
> The board itself inserts the delays by having long tracks. In this
> case, your DT is correct.
> 
> It would be good to understand this, just in case it is the second
> condition.

Thanks for your kind explanation.

The clock delay I mentioned is added into u-boot bootloader in a
patch I'm currently trying to submit.
https://lore.kernel.org/all/20220324165530.359668-1-quic_jaehyoo@quicinc.com/

I had to pick those value with 'rgmii' to make my board work but the
delay is actually different from what AST2600 EVB DT provides. I think
it's caused by a different PCB routing and board characteristic like
you said.

I want to keep this setting as it's acquired from lots of experiments.
It could be changed in case if it needs to be fixed in the future.

Thanks,
Jae
Andrew Lunn March 25, 2022, 12:10 a.m. UTC | #5 
> The clock delay I mentioned is added into u-boot bootloader in a
> patch I'm currently trying to submit.
> https://lore.kernel.org/all/20220324165530.359668-1-quic_jaehyoo@quicinc.com/

Do you mean this:

+&scu {
+	mac0-clk-delay = <0x1d 0x1c
+			  0x10 0x17
+			  0x10 0x17>;
+	mac1-clk-delay = <0x1d 0x10
+			  0x10 0x10
+			  0x10 0x10>;
+	mac2-clk-delay = <0x0a 0x04
+			  0x08 0x04
+			  0x08 0x04>;
+	mac3-clk-delay = <0x0a 0x04
+			  0x08 0x04
+			  0x08 0x04>;

So the MAC is adding the delay. In that case, setting phy-mode to
rgmii is O.K, but it would be nice to add a comment in DT that the
bootloader is setting up the MAC to insert the delay.

	   Andrew
Jae Hyun Yoo March 25, 2022, 12:15 a.m. UTC | #6 
On 3/24/2022 5:10 PM, Andrew Lunn wrote:
>> The clock delay I mentioned is added into u-boot bootloader in a
>> patch I'm currently trying to submit.
>> https://lore.kernel.org/all/20220324165530.359668-1-quic_jaehyoo@quicinc.com/
> 
> Do you mean this:
> 
> +&scu {
> +	mac0-clk-delay = <0x1d 0x1c
> +			  0x10 0x17
> +			  0x10 0x17>;
> +	mac1-clk-delay = <0x1d 0x10
> +			  0x10 0x10
> +			  0x10 0x10>;
> +	mac2-clk-delay = <0x0a 0x04
> +			  0x08 0x04
> +			  0x08 0x04>;
> +	mac3-clk-delay = <0x0a 0x04
> +			  0x08 0x04
> +			  0x08 0x04>;
> 
> So the MAC is adding the delay. In that case, setting phy-mode to
> rgmii is O.K, but it would be nice to add a comment in DT that the
> bootloader is setting up the MAC to insert the delay.

Right. It would be better with the comment. I'll add the comment in v2.

Thanks for your suggestion!

-Jae
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ec801dc22b61..22c515ca20f2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1486,6 +1486,7 @@  dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-nuvia-dc-scm.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-mihawk.dtb \
 	aspeed-bmc-opp-mowgli.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts b/arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts
new file mode 100644
index 000000000000..54ac6b30c213
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts
@@ -0,0 +1,188 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "Nuvia DC-SCM BMC";
+	compatible = "nuvia,dc-scm-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+
+	use-ncsi;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <133000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
+	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
+			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
+			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
+			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
+	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
+			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
+			"","TPM2_PIRQ_N","TPM2_RST_N","",
+	/*E0-E7*/	"","","","","","","","";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};