deleted file mode 100644
@@ -1,67 +0,0 @@
-* Rockchip RK3288 Clock and Reset Unit
-
-The RK3288 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-A revision of this SoC is available: rk3288w. The clock tree is a bit
-different so another dt-compatible is available. Noticed that it is only
-setting the difference but there is no automatic revision detection. This
-should be performed by bootloaders.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
- case of this revision of Rockchip rk3288.
-- reg: physical base address of the controller and length of memory mapped
- region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
- If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_edp_24m" - external display port clock - optional,
- - "ext_vip" - external VIP clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
-
-Example: Clock controller node:
-
- cru: cru@20000000 {
- compatible = "rockchip,rk3188-cru";
- reg = <0x20000000 0x1000>;
- rockchip,grf = <&grf>;
-
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
-Example: UART controller node that consumes the clock generated by the clock
- controller:
-
- uart0: serial@10124000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10124000 0x400>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&cru SCLK_UART0>;
- };
new file mode 100644
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+ - Elaine Zhang <zhangqing@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ The RK3288 clock controller generates and supplies clocks to various
+ controllers within the SoC and also implements a reset controller for SoC
+ peripherals.
+
+ A revision of this SoC is available: rk3288w. The clock tree is a bit
+ different so another dt-compatible is available. Noticed that it is only
+ setting the difference but there is no automatic revision detection. This
+ should be performed by boot loaders.
+
+ Each clock is assigned an identifier and client nodes can use this identifier
+ to specify the clock which they consume. All available clocks are defined as
+ preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+ used in device tree sources. Similar macros exist for the reset sources in
+ these files.
+
+ There are several clocks that are generated outside the SoC. It is expected
+ that they are defined using standard clock bindings with the
+ clock-output-names defined in this schema.
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3288-cru
+ - rockchip,rk3288w-cru
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 8
+
+ clock-names:
+ minItems: 1
+ maxItems: 8
+ items:
+ enum:
+ - xin24m
+ - xin32k
+ - ext_i2s
+ - ext_hsadc
+ - ext_edp_24m
+ - ext_vip
+ - ext_isp
+ - ext_jtag
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the "general register files" (GRF),
+ if missing pll rates are not changeable, due to the missing pll
+ lock status.
+
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - "#clock-cells"
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3288-cru";
+ reg = <0xff760000 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
Convert rockchip,rk3288-cru.txt to YAML. Changes against original bindings: Add clocks and clock-names because the device has to have at least one input clock. Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- Changed V4: add more clocks add clocks to example add clocks requirement Changed V2: add Rockchip maintainer on her request fix yamllint line too long restyle --- .../bindings/clock/rockchip,rk3288-cru.txt | 67 ------------- .../bindings/clock/rockchip,rk3288-cru.yaml | 93 +++++++++++++++++++ 2 files changed, 93 insertions(+), 67 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml