diff mbox series

[3/3] serial: stm32: add earlycon support

Message ID 20220407123109.132035-4-valentin.caron@foss.st.com (mailing list archive)
State New, archived
Headers show
Series serial: stm32: add earlycon and polling mode | expand

Commit Message

Valentin Caron April 7, 2022, 12:31 p.m. UTC 
Add early console support in stm32 uart driver.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
---
 .../admin-guide/kernel-parameters.txt         |  6 +++
 drivers/tty/serial/Kconfig                    |  1 +
 drivers/tty/serial/stm32-usart.c              | 51 +++++++++++++++++++
 3 files changed, 58 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 3f1cc5e317ed..e941c3351c7a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1264,6 +1264,12 @@ 
 			address must be provided, and the serial port must
 			already be setup and configured.
 
+		stm32,<addr>
+			Use early console provided by ST Microelectronics
+			serial driver for STM32 SoCs. A valid base address
+			must be provided, and the serial port must already
+			be setup and configured.
+
 	earlyprintk=	[X86,SH,ARM,M68k,S390]
 			earlyprintk=vga
 			earlyprintk=sclp
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 6949e883ffab..ed59de8d2e11 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1443,6 +1443,7 @@  config SERIAL_STM32_CONSOLE
 	bool "Support for console on STM32"
 	depends on SERIAL_STM32=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 
 config SERIAL_MVEBU_UART
 	bool "Marvell EBU serial port support"
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index d2cf789c7997..b6852a5a9143 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1767,6 +1767,57 @@  static struct console stm32_console = {
 #define STM32_SERIAL_CONSOLE NULL
 #endif /* CONFIG_SERIAL_STM32_CONSOLE */
 
+#ifdef CONFIG_SERIAL_EARLYCON
+static void early_stm32_usart_console_putchar(struct uart_port *port, unsigned char ch)
+{
+	struct stm32_usart_info *info = port->private_data;
+
+	while (!(readl_relaxed(port->membase + info->ofs.isr) & USART_SR_TXE))
+		cpu_relax();
+
+	writel_relaxed(ch, port->membase + info->ofs.tdr);
+}
+
+static void early_stm32_serial_write(struct console *console, const char *s, unsigned int count)
+{
+	struct earlycon_device *device = console->data;
+	struct uart_port *port = &device->port;
+
+	uart_console_write(port, s, count, early_stm32_usart_console_putchar);
+}
+
+static int __init early_stm32_h7_serial_setup(struct earlycon_device *device, const char *options)
+{
+	if (!(device->port.membase || device->port.iobase))
+		return -ENODEV;
+	device->port.private_data = &stm32h7_info;
+	device->con->write = early_stm32_serial_write;
+	return 0;
+}
+
+static int __init early_stm32_f7_serial_setup(struct earlycon_device *device, const char *options)
+{
+	if (!(device->port.membase || device->port.iobase))
+		return -ENODEV;
+	device->port.private_data = &stm32f7_info;
+	device->con->write = early_stm32_serial_write;
+	return 0;
+}
+
+static int __init early_stm32_f4_serial_setup(struct earlycon_device *device, const char *options)
+{
+	if (!(device->port.membase || device->port.iobase))
+		return -ENODEV;
+	device->port.private_data = &stm32f4_info;
+	device->con->write = early_stm32_serial_write;
+	return 0;
+}
+
+OF_EARLYCON_DECLARE(stm32, "st,stm32h7-uart", early_stm32_h7_serial_setup);
+OF_EARLYCON_DECLARE(stm32, "st,stm32f7-uart", early_stm32_f7_serial_setup);
+OF_EARLYCON_DECLARE(stm32, "st,stm32-uart", early_stm32_f4_serial_setup);
+#endif /* CONFIG_SERIAL_EARLYCON */
+
 static struct uart_driver stm32_usart_driver = {
 	.driver_name	= DRIVER_NAME,
 	.dev_name	= STM32_SERIAL_NAME,