diff mbox series

[1/6] ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT

Message ID 20220411200143.4876-2-stefan.wahren@i2se.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: bcm283x: Adjust GPIO line names | expand

Commit Message

Stefan Wahren April 11, 2022, 8:01 p.m. UTC 
From: Phil Elwell <phil@raspberrypi.com>

The GPIOs 30 to 39 are connected to the Cypress CYW43438 (Wifi/BT).
So fix the GPIO line names accordingly.

Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

Comments

Florian Fainelli April 19, 2022, 6:27 p.m. UTC | #1 
On Mon, 11 Apr 2022 22:01:38 +0200, Stefan Wahren <stefan.wahren@i2se.com> wrote:
> From: Phil Elwell <phil@raspberrypi.com>
> 
> The GPIOs 30 to 39 are connected to the Cypress CYW43438 (Wifi/BT).
> So fix the GPIO line names accordingly.
> 
> Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
> Signed-off-by: Phil Elwell <phil@raspberrypi.com>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 243236bc1e00..8b043ab62dc8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -74,16 +74,18 @@  &gpio {
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
 			  "CAM_GPIO1", /* GPIO40 */
 			  "WL_ON", /* GPIO41 */
 			  "NC", /* GPIO42 */