[v1,14/17] arm: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants

Message ID	20220412074004.2485264-15-o.rempel@pengutronix.de (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Oleksij Rempel <o.rempel@pengutronix.de> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org> Cc: David Jander <david@protonic.nl>, Oleksij Rempel <o.rempel@pengutronix.de>, devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Robin van der Gracht <robin@protonic.nl> Subject: [PATCH v1 14/17] arm: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants Date: Tue, 12 Apr 2022 09:40:01 +0200 Message-Id: <20220412074004.2485264-15-o.rempel@pengutronix.de> In-Reply-To: <20220412074004.2485264-1-o.rempel@pengutronix.de> References: <20220412074004.2485264-1-o.rempel@pengutronix.de> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	protonic fixes \| expand [v1,00/17] protonic fixes [v1,01/17] arm: dts: imx6qdl-vicut1.dtsi: remove TiWi module [v1,02/17] arm: dts: imx6qdl-vicut1.dtsi: Put nON_SWITCH in own pinctrl grp [v1,03/17] arm: dts: imx6qdl-vicut1.dtsi: Remove PCIe [v1,04/17] arm: dts: imx6qdl-vicut1/victgo: Remove UART2 [v1,05/17] arm: dts: imx6qdl-vicut1.dtsi: Fix LED names [v1,06/17] arm: dts: imx6qdl-vicut1.dtsi: Fix debug LED gpio pins [v1,07/17] arm: dts: imx6qdl-vicut1.dtsi: Update GPIO line names [v1,08/17] arm: dts: imx6qdl-vicut1.dtsi: Remove conflicting pinctrl entry [v1,09/17] arm: dts: imx6q-vicut1.dts: remove sata node [v1,10/17] arm: dts: imx6dl-victgo.dts: update gpio names [v1,11/17] arm: dts: imx6dl-victgo.dts: Factor out common parts to imx6qdl-victgo.dtsi [v1,12/17] arm: dts: imx6qdl-vicut1.dtsi: Move some node out to DTS files [v1,13/17] arm: dts: Remove imx6qdl-victgo.dtsi [v1,14/17] arm: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants [v1,15/17] arm: dts: imx6dl-victgo.dts: Remove touchscreen x axis inversion [v1,16/17] arm: dts: imx6qdl-vicut1.dtsi: Add missing ISB led node [v1,17/17] arm: dts: imx6qdl-vicut1.dtsi: add thermal zone and attach tmp103 to it.

diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts index c6a904bbed01..5035d303447d 100644 --- a/arch/arm/boot/dts/imx6dl-vicut1.dts +++ b/arch/arm/boot/dts/imx6dl-vicut1.dts @@ -6,130 +6,9 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1 Board"; compatible = "kvg,vicut1", "fsl,imx6dl"; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - autorepeat; - - power { - label = "Power Button"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight_lcd>; - power-supply = <&reg_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii-id"; - phy-handle = <&rgmii_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - /* Microchip KSZ9031RNX PHY */ - rgmii_phy: ethernet-phy@0 { - reg = <0>; - interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <300>; - }; - }; -}; - -&gpio1 { - gpio-line-names = - "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", - "CAM2_MIRROR", "", "", "SMBALERT", - "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", - "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "ETH_MDIO", "", - "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; -}; - -&gpio4 { - gpio-line-names = - "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", - "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", - "CAN2_SR", "CAN2_TX", "CAN2_RX", - "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", - "HITCH_IN_OUT", - "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", - "ISB_LED"; -}; - -&gpio5 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", - "I2S_BITCLK", "I2S_DOUT", - "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", - "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; -}; - -&gpio6 { - gpio-line-names = - "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", - "ITU656_D6", "ITU656_D7", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", - "RGMII_TD3", - "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", - "RGMII_RD2", "RGMII_RD3", "", ""; -}; - -&iomuxc { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 - /* Phy reset */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 - >; - }; - - pinctrl_gpiokeys: gpiokeygrp { - fsl,pins = < - /* nON_SWITCH */ - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts index 8b228d5fc4a3..dd91aff3f9e2 100644 --- a/arch/arm/boot/dts/imx6q-vicut1.dts +++ b/arch/arm/boot/dts/imx6q-vicut1.dts @@ -6,130 +6,9 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1Q Board"; compatible = "kvg,vicut1q", "fsl,imx6q"; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - autorepeat; - - power { - label = "Power Button"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight_lcd>; - power-supply = <&reg_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii-id"; - phy-handle = <&rgmii_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - /* Microchip KSZ9031RNX PHY */ - rgmii_phy: ethernet-phy@0 { - reg = <0>; - interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <300>; - }; - }; -}; - -&gpio1 { - gpio-line-names = - "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", - "CAM2_MIRROR", "", "", "SMBALERT", - "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", - "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "ETH_MDIO", "", - "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; -}; - -&gpio4 { - gpio-line-names = - "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", - "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", - "CAN2_SR", "CAN2_TX", "CAN2_RX", - "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", - "HITCH_IN_OUT", - "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", - "ISB_LED"; -}; - -&gpio5 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", - "I2S_BITCLK", "I2S_DOUT", - "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", - "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; -}; - -&gpio6 { - gpio-line-names = - "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", - "ITU656_D6", "ITU656_D7", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", - "RGMII_TD3", - "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", - "RGMII_RD2", "RGMII_RD3", "", ""; -}; - -&iomuxc { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 - /* Phy reset */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 - >; - }; - - pinctrl_gpiokeys: gpiokeygrp { - fsl,pins = < - /* nON_SWITCH */ - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi new file mode 100644 index 000000000000..f505f2704530 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 Protonic Holland + */ + +/ { + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + power-supply = <&reg_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "ETH_MDIO", "", + "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", + "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts index 31c748e9d92f..49ff145fffe5 100644 --- a/arch/arm/boot/dts/imx6qp-vicutp.dts +++ b/arch/arm/boot/dts/imx6qp-vicutp.dts @@ -6,130 +6,9 @@ /dts-v1/; #include "imx6qp.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1P Board"; compatible = "kvg,vicutp", "fsl,imx6qp"; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - autorepeat; - - power { - label = "Power Button"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight_lcd>; - power-supply = <&reg_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii-id"; - phy-handle = <&rgmii_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - /* Microchip KSZ9031RNX PHY */ - rgmii_phy: ethernet-phy@0 { - reg = <0>; - interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <300>; - }; - }; -}; - -&gpio1 { - gpio-line-names = - "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", - "CAM2_MIRROR", "", "", "SMBALERT", - "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", - "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "ETH_MDIO", "", - "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; -}; - -&gpio4 { - gpio-line-names = - "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", - "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", - "CAN2_SR", "CAN2_TX", "CAN2_RX", - "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", - "HITCH_IN_OUT", - "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", - "ISB_LED"; -}; - -&gpio5 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", - "I2S_BITCLK", "I2S_DOUT", - "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", - "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; -}; - -&gpio6 { - gpio-line-names = - "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", - "ITU656_D6", "ITU656_D7", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", - "RGMII_TD3", - "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", - "RGMII_RD2", "RGMII_RD3", "", ""; -}; - -&iomuxc { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 - /* Phy reset */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 - >; - }; - - pinctrl_gpiokeys: gpiokeygrp { - fsl,pins = < - /* nON_SWITCH */ - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 - >; - }; };

[v1,14/17] arm: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants

Commit Message

Patch