diff mbox series

[v1,16/17] arm: dts: imx6qdl-vicut1.dtsi: Add missing ISB led node

Message ID 20220412074004.2485264-17-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series protonic fixes | expand

Commit Message

Oleksij Rempel April 12, 2022, 7:40 a.m. UTC 
From: David Jander <david@protonic.nl>

Add missing ISB led node.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index 2a86136a04e8..c928bd854e92 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -95,6 +95,13 @@  led-2 {
 			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
+
+		led-3 {
+			label = "isb_led";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
 	};
 
 	reg_1v8: regulator-1v8 {
@@ -574,6 +581,8 @@  MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
 			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
 			/* POWER_LED */
 			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
+			/* ISB_LED */
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31		0x1b0b0
 		>;
 	};