diff mbox series

[v1,08/17] arm: dts: imx6qdl-vicut1.dtsi: Remove conflicting pinctrl entry

Message ID 20220412074004.2485264-9-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series protonic fixes | expand

Commit Message

Oleksij Rempel April 12, 2022, 7:39 a.m. UTC 
From: David Jander <david@protonic.nl>

The function of DISP0_DAT9 is dependent on hardware revision of two
particular variants. This setting should be done by the bootloader anyway,
and is not needed in the kernel, so remove it from the DT.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 4 ----
 1 file changed, 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index a93e7f8302aa..6c943ca950f4 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -655,10 +655,6 @@  MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
 			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
 			/* DIP1_FB */
 			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
-
-			/* New in UT2: FIXME: ISB PWM should start off, PD */
-			/* ISB_LED_PWM */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x130b0
 		>;
 	};