diff mbox series

[v3,2/2] arm64: dts: imx8mn: add 8MNANOD3L-EVK device tree

Message ID 20220412143238.1925059-3-michael@walle.cc (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8mn: add 8MNANOD3L-EVK device tree | expand

Commit Message

Michael Walle April 12, 2022, 2:32 p.m. UTC 
Add a device tree for the 8MNANOD3L-EVK eval board which features an
IMX8MN SoC. It is similar to the 8MNANODLPD4-EVK eval board except it
has an IMX8MN UltraLite SoC and DDR3L memory. It esp. differs in the
PMIC configuration because the SoC has a smaller package and thus the
ARM core voltage is combined with the SoC voltage and the DDR voltage
is 1.35V for the DDR3L memory.

Signed-off-by: Michael Walle <michael@walle.cc>
---
changes since v2:
 - new patch

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mn-ddr3l-evk.dts   | 114 ++++++++++++++++++
 2 files changed, 115 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 85c2c9ba5110..bdb76e67ccfe 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -73,6 +73,7 @@  dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
new file mode 100644
index 000000000000..000e2c0596df
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
@@ -0,0 +1,114 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NXP i.MX8MNano DDR3L EVK board";
+	compatible = "fsl,imx8mn-ddr3l-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	cpu-supply = <&buck1>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck1>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck1>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck1>;
+};
+
+&i2c1 {
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450b";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC_0V9";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V35";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "VDD_SNVS_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_PHY_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};