diff mbox series

arm64: dts: sparx5: rename pinctrl nodes

Message ID 20220420194600.3416282-1-michael@walle.cc (mailing list archive)
State New, archived
Headers show
Series arm64: dts: sparx5: rename pinctrl nodes | expand

Commit Message

Michael Walle April 20, 2022, 7:46 p.m. UTC 
The pinctrl device tree binding will be converted to YAML format. Rename
the pin nodes so they end with "-pins" to match the schema.

Signed-off-by: Michael Walle <michael@walle.cc>
---
The YAML conversion patch is alread in
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel

 .../dts/microchip/sparx5_pcb134_board.dtsi    | 26 +++++++++----------
 .../dts/microchip/sparx5_pcb135_board.dtsi    | 10 +++----
 2 files changed, 18 insertions(+), 18 deletions(-)

Comments

Michael Walle Aug. 26, 2022, 11:17 a.m. UTC | #1 
[+ Arnd because he was the one who picked the first two
patches of this file. ]

Am 2022-04-20 21:46, schrieb Michael Walle:
> The pinctrl device tree binding will be converted to YAML format. 
> Rename
> the pin nodes so they end with "-pins" to match the schema.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> The YAML conversion patch is alread in
> https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel

Ping. Who is picking this one up?

-michael
Michael Walle Aug. 26, 2022, 12:09 p.m. UTC | #2 
[+ Arnd because he was the one who picked the first two
patches of this file. Resend because I forgot Arnd, doh!]

Am 2022-04-20 21:46, schrieb Michael Walle:
> The pinctrl device tree binding will be converted to YAML format. 
> Rename
> the pin nodes so they end with "-pins" to match the schema.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> The YAML conversion patch is alread in
> https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel

Ping. Who is picking this one up?

-michael
Krzysztof Kozlowski May 17, 2023, 12:23 p.m. UTC | #3 
On Wed, 20 Apr 2022 21:46:00 +0200, Michael Walle wrote:
> The pinctrl device tree binding will be converted to YAML format. Rename
> the pin nodes so they end with "-pins" to match the schema.
> 
> 

Applied, thanks!

[1/1] arm64: dts: sparx5: rename pinctrl nodes
      https://git.kernel.org/krzk/linux-dt/c/d5e64404e77c19ec5bd687b34a11eec0263f1aa8

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 33faf1f3264f..6f488e774215 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -325,69 +325,69 @@  &sgpio2 {
 };
 
 &gpio {
-	i2cmux_pins_i: i2cmux-pins-i {
+	i2cmux_pins_i: i2cmux-pins {
 	       pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
 		      "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35",
 		      "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57";
 		function = "twi_scl_m";
 		output-low;
 	};
-	i2cmux_0: i2cmux-0 {
+	i2cmux_0: i2cmux-0-pins {
 		pins = "GPIO_16";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_1: i2cmux-1 {
+	i2cmux_1: i2cmux-1-pins {
 		pins = "GPIO_17";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_2: i2cmux-2 {
+	i2cmux_2: i2cmux-2-pins {
 		pins = "GPIO_18";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_3: i2cmux-3 {
+	i2cmux_3: i2cmux-3-pins {
 		pins = "GPIO_19";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_4: i2cmux-4 {
+	i2cmux_4: i2cmux-4-pins {
 		pins = "GPIO_20";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_5: i2cmux-5 {
+	i2cmux_5: i2cmux-5-pins {
 		pins = "GPIO_22";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_6: i2cmux-6 {
+	i2cmux_6: i2cmux-6-pins {
 		pins = "GPIO_36";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_7: i2cmux-7 {
+	i2cmux_7: i2cmux-7-pins {
 		pins = "GPIO_35";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_8: i2cmux-8 {
+	i2cmux_8: i2cmux-8-pins {
 		pins = "GPIO_50";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_9: i2cmux-9 {
+	i2cmux_9: i2cmux-9-pins {
 		pins = "GPIO_51";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_10: i2cmux-10 {
+	i2cmux_10: i2cmux-10-pins {
 		pins = "GPIO_56";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_11: i2cmux-11 {
+	i2cmux_11: i2cmux-11-pins {
 		pins = "GPIO_57";
 		function = "twi_scl_m";
 		output-high;
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index ef96e6d8c6b3..d9e519bfbf68 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -59,28 +59,28 @@  led@7 {
 };
 
 &gpio {
-	i2cmux_pins_i: i2cmux-pins-i {
+	i2cmux_pins_i: i2cmux-pins {
 	       pins = "GPIO_35", "GPIO_36",
 		      "GPIO_50", "GPIO_51";
 		function = "twi_scl_m";
 		output-low;
 	};
-	i2cmux_s29: i2cmux-0 {
+	i2cmux_s29: i2cmux-0-pins {
 		pins = "GPIO_35";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_s30: i2cmux-1 {
+	i2cmux_s30: i2cmux-1-pins {
 		pins = "GPIO_36";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_s31: i2cmux-2 {
+	i2cmux_s31: i2cmux-2-pins {
 		pins = "GPIO_50";
 		function = "twi_scl_m";
 		output-high;
 	};
-	i2cmux_s32: i2cmux-3 {
+	i2cmux_s32: i2cmux-3-pins {
 		pins = "GPIO_51";
 		function = "twi_scl_m";
 		output-high;