| Message ID | 20220502224127.2604333-10-michael@walle.cc (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: lan966x: dtsi improvements and KSwitch D10 support | expand |
On 03.05.2022 01:41, Michael Walle wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > Add the MDIO controller nodes. The integrated PHYs are connected to the > second controller. This controller also takes care of the resets of the > integrated PHYs, thus it has two memory regions. The first controller > is routed to the external MDIO/MDC pins. > > By default, they are disabled. > > Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> > --- > arch/arm/boot/dts/lan966x.dtsi | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi > index 64290fb43926..0442735910da 100644 > --- a/arch/arm/boot/dts/lan966x.dtsi > +++ b/arch/arm/boot/dts/lan966x.dtsi > @@ -418,6 +418,37 @@ gpio: pinctrl@e2004064 { > #interrupt-cells = <2>; > }; > > + mdio0: mdio@e2004118 { > + compatible = "microchip,lan966x-miim"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0xe2004118 0x24>; > + clocks = <&sys_clk>; > + status = "disabled"; > + }; > + > + mdio1: mdio@e200413c { > + compatible = "microchip,lan966x-miim"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0xe200413c 0x24>, > + <0xe2010020 0x4>; > + clocks = <&sys_clk>; > + status = "disabled"; > + > + phy0: ethernet-phy@1 { > + reg = <1>; > + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + phy1: ethernet-phy@2 { > + reg = <2>; > + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + }; > + > sgpio: gpio@e2004190 { > compatible = "microchip,sparx5-sgpio"; > reg = <0xe2004190 0x118>; > -- > 2.30.2 >
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi index 64290fb43926..0442735910da 100644 --- a/arch/arm/boot/dts/lan966x.dtsi +++ b/arch/arm/boot/dts/lan966x.dtsi @@ -418,6 +418,37 @@ gpio: pinctrl@e2004064 { #interrupt-cells = <2>; }; + mdio0: mdio@e2004118 { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe2004118 0x24>; + clocks = <&sys_clk>; + status = "disabled"; + }; + + mdio1: mdio@e200413c { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe200413c 0x24>, + <0xe2010020 0x4>; + clocks = <&sys_clk>; + status = "disabled"; + + phy0: ethernet-phy@1 { + reg = <1>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + phy1: ethernet-phy@2 { + reg = <2>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + sgpio: gpio@e2004190 { compatible = "microchip,sparx5-sgpio"; reg = <0xe2004190 0x118>;
Add the MDIO controller nodes. The integrated PHYs are connected to the second controller. This controller also takes care of the resets of the integrated PHYs, thus it has two memory regions. The first controller is routed to the external MDIO/MDC pins. By default, they are disabled. Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm/boot/dts/lan966x.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)