diff mbox series

[v6,7/7] arm64: dts: mt8195: Add thermal zone

Message ID 20220512122433.1399802-8-abailon@baylibre.com (mailing list archive)
State New, archived
Headers show
Series Add LVTS architecture thermal | expand

Commit Message

Alexandre Bailon May 12, 2022, 12:24 p.m. UTC 
From: Tinghan Shen <tinghan.shen@mediatek.com>

This adds the thermal zone for the mt8195.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 103 +++++++++++++++++++++++
 1 file changed, 103 insertions(+)

Comments

Krzysztof Kozlowski May 12, 2022, 2:32 p.m. UTC | #1 
On 12/05/2022 14:24, Alexandre Bailon wrote:
> From: Tinghan Shen <tinghan.shen@mediatek.com>
> 
> This adds the thermal zone for the mt8195.
> 
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8195.dtsi | 103 +++++++++++++++++++++++
>  1 file changed, 103 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 12887fb4d0d1..d6e5b595a89f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -823,6 +823,21 @@ spi0: spi@1100a000 {
>  			status = "disabled";
>  		};
>  
> +		lvts: lvts@1100b000 {

Generic node names.

> +			compatible = "mediatek,mt8195-lvts";
> +			#thermal-sensor-cells = <1>;
> +			reg = <0 0x1100b000 0 0x1000>,
> +				<0 0x11278000 0 0x1000>;
> +			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
> +					<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
> +			clock-names = "lvts_clk";
> +			resets = <&infracfg_rst 1>,
> +					<&infracfg_rst 2>;
> +			nvmem-cells = <&lvts_e_data1 &lvts_e_data2>;
> +			nvmem-cell-names = "e_data1","e_data2";
> +		};
> +
>  		spi1: spi@11010000 {
>  			compatible = "mediatek,mt8195-spi",
>  				     "mediatek,mt6765-spi";
> @@ -1627,4 +1642,92 @@ vencsys_core1: clock-controller@1b000000 {
>  			#clock-cells = <1>;
>  		};
>  	};
> +
> +	thermal_zones: thermal-zones {
> +		cpu_big1 {

No underscores in node names. Generic node names - please open existing
thermal zones schema and look how it is done. This probably fails
validation, so be sure your DTS passes make dtbs_check.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 12887fb4d0d1..d6e5b595a89f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -823,6 +823,21 @@  spi0: spi@1100a000 {
 			status = "disabled";
 		};
 
+		lvts: lvts@1100b000 {
+			compatible = "mediatek,mt8195-lvts";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100b000 0 0x1000>,
+				<0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+					<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "lvts_clk";
+			resets = <&infracfg_rst 1>,
+					<&infracfg_rst 2>;
+			nvmem-cells = <&lvts_e_data1 &lvts_e_data2>;
+			nvmem-cell-names = "e_data1","e_data2";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8195-spi",
 				     "mediatek,mt6765-spi";
@@ -1627,4 +1642,92 @@  vencsys_core1: clock-controller@1b000000 {
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu_big1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 0>;
+		};
+		cpu_big2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 1>;
+		};
+		cpu_big3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 2>;
+		};
+		cpu_big4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 3>;
+		};
+		cpu_little1{
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 4>;
+		};
+		cpu_little2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 5>;
+		};
+		cpu_little3 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 6>;
+		};
+		cpu_little4 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 7>;
+		};
+		vpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 8>;
+		};
+		vpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 9>;
+		};
+		gpu1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 10>;
+		};
+		gpu2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 11>;
+		};
+		vdec {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 12>;
+		};
+		img {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 13>;
+		};
+		infra {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 14>;
+		};
+		cam1 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 15>;
+		};
+		cam2 {
+			polling-delay = <0>; /* milliseconds */
+			polling-delay-passive = <0>; /* milliseconds */
+			thermal-sensors = <&lvts 16>;
+		};
+	};
 };