@@ -9,5 +9,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
bcm2837-rpi-zero-2-w.dtb
subdir-y += bcm4908
+subdir-y += bcmbca
subdir-y += northstar2
subdir-y += stingray
new file mode 100644
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb
new file mode 100644
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm63158", "brcm,bcmbca";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ B53_0: cpu@0 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_1: cpu@1 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_2: cpu@2 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_3: cpu@3 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>,
+ <&B53_2>, <&B53_3>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ cpu_off = <1>;
+ cpu_on = <2>;
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x81000000 0x0 0x4000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x1000 0x0 0x1000>,
+ <0x0 0x2000 0x0 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x12000 0x0 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63158.dtsi"
+
+/ {
+ model = "Broadcom BCM963158 Reference Board";
+ compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
Add dts for ARMv8 based broadband SoC BCM63158. bcm63158.dtsi is the SoC description dts header and bcm963158.dts is a simple dts file for Broadcom BCM963158 Reference board that only enable the UART port. Signed-off-by: William Zhang <william.zhang@broadcom.com> --- arch/arm64/boot/dts/broadcom/Makefile | 1 + arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 2 + .../boot/dts/broadcom/bcmbca/bcm63158.dtsi | 128 ++++++++++++++++++ .../boot/dts/broadcom/bcmbca/bcm963158.dts | 30 ++++ 4 files changed, 161 insertions(+) create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/Makefile create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts