[v1,17/17] ARM: dts: imx6q-apalis: Cleanup

Message ID	20220516115846.58328-18-max.oss.09@gmail.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Max Krummenacher <max.oss.09@gmail.com> To: max.krummenacher@toradex.com Cc: Fabio Estevam <festevam@gmail.com>, Krzysztof Kozlowski <krzk+dt@kernel.org>, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Rob Herring <robh+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v1 17/17] ARM: dts: imx6q-apalis: Cleanup Date: Mon, 16 May 2022 13:58:45 +0200 Message-Id: <20220516115846.58328-18-max.oss.09@gmail.com> In-Reply-To: <20220516115846.58328-1-max.oss.09@gmail.com> References: <20220516115846.58328-1-max.oss.09@gmail.com> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	ARM: dts: imx6q-apalis: Misc improvements and newly added carrier \| expand [v1,00/17] ARM: dts: imx6q-apalis: Misc improvements and newly added carrier [v1,02/17] Revert "ARM: dts: imx6qdl-apalis: Avoid underscore in node name" [v1,03/17] ARM: dts: imx6q-apalis: Add gpio-line-names [v1,04/17] ARM: dts: imx6q-apalis: Command pmic to standby for poweroff [v1,05/17] ARM: dts: imx6q-apalis: Move parallel rgb interface to SoM dtsi [v1,06/17] ARM: dts: imx6q-apalis: Move pinmux groups to SoM dtsi [v1,07/17] ARM: dts: imx6q-apalis: Move Atmel MXT touch ctrl to SoM dtsi [v1,08/17] ARM: dts: imx6q-apalis: Add LVDS panel support [v1,09/17] ARM: dts: imx6q-apalis: Disable HDMI [v1,10/17] ARM: dts: imx6q-apalis: Disable stmpe touchscreen [v1,11/17] ARM: dts: imx6q-apalis: Add ov5640 mipi csi camera [v1,12/17] ARM: dts: imx6q-apalis: Add adv7280 video input [v1,13/17] ARM: dts: imx6q-apalis: Clean-up sd card support [v1,14/17] ARM: dts: imx6q-apalis: Add support for Toradex Ixora V1.2 carrier boards [v1,15/17] ARM: dts: imx6q-apalis: backlight pwm: Simplify inverted backlight [v1,16/17] ARM: dts: imx6q-apalis: backlight pwm: Adapt brightness steps [v1,17/17] ARM: dts: imx6q-apalis: Cleanup

diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 5c4d9a4ec586..b3e169239a19 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -36,31 +36,31 @@ pinctrl-0 = <&pinctrl_gpio_keys>; wakeup { - label = "Wake-Up"; + debounce-interval = <10>; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; wakeup-source; }; }; reg_pcie_switch: regulator-pcie-switch { compatible = "regulator-fixed"; - regulator-name = "pcie_switch"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + enable-active-high; gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "pcie_switch"; startup-delay-us = <100000>; - enable-active-high; status = "okay"; }; reg_3v3_sw: regulator-3v3-sw { compatible = "regulator-fixed"; - regulator-name = "3.3V_SW"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SW"; }; }; @@ -124,11 +124,11 @@ status = "okay"; }; -&reg_usb_otg_vbus { +&reg_usb_host_vbus { status = "okay"; }; -&reg_usb_host_vbus { +&reg_usb_otg_vbus { status = "okay"; }; @@ -177,8 +177,8 @@ /* SD1 */ &usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 97ddf4621bdf..8a12585ab062 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -36,38 +36,37 @@ pinctrl-0 = <&pinctrl_gpio_keys>; wakeup { - label = "Wake-Up"; + debounce-interval = <10>; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; wakeup-source; }; }; leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds_ixora>; led4-green { - label = "LED_4_GREEN"; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + label = "LED_4_GREEN"; }; led4-red { - label = "LED_4_RED"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + label = "LED_4_RED"; }; led5-green { - label = "LED_5_GREEN"; gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + label = "LED_5_GREEN"; }; led5-red { - label = "LED_5_RED"; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + label = "LED_5_RED"; }; }; }; @@ -129,11 +128,11 @@ status = "okay"; }; -&reg_usb_otg_vbus { +&reg_usb_host_vbus { status = "okay"; }; -&reg_usb_host_vbus { +&reg_usb_otg_vbus { status = "okay"; }; @@ -177,9 +176,9 @@ /* SD1 */ &usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 62d9d907432c..7a1feaa5bc23 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -89,18 +89,18 @@ reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "+V3.3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3"; }; reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "+V3.3_AUDIO"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_AUDIO"; }; reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd { @@ -125,63 +125,63 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_otg_vbus"; status = "disabled"; }; /* on module USB hub */ reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>; - regulator-name = "usb_host_vbus_hub"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus_hub"; startup-delay-us = <2000>; - enable-active-high; status = "okay"; }; reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus"; vin-supply = <&reg_usb_host_vbus_hub>; status = "disabled"; }; sound { compatible = "fsl,imx-audio-sgtl5000"; - model = "imx6q-apalis-sgtl5000"; - ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; + model = "imx6q-apalis-sgtl5000"; mux-ext-port = <4>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; }; sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; spdif-controller = <&spdif>; spdif-in; spdif-out; + model = "imx-spdif"; status = "disabled"; }; }; @@ -495,104 +495,105 @@ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; fsl,pmic-stby-poweroff; reg = <0x08>; regulators { sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1975000>; + regulator-min-microvolt = <400000>; }; swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5150000>; + regulator-min-microvolt = <5000000>; }; snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <1000000>; }; vref_reg: vrefddr { - regulator-boot-on; regulator-always-on; + regulator-boot-on; }; vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; }; vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; }; }; codec: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; - clocks = <&clks IMX6QDL_CLK_CKO>; + reg = <0x0a>; VDDA-supply = <&reg_module_3v3_audio>; VDDIO-supply = <&reg_module_3v3>; VDDD-supply = <&vgen4_reg>; @@ -601,15 +602,15 @@ /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - reg = <0x41>; + blocks = <0x5>; + id = <0>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio4>; interrupt-controller; - id = <0>; - blocks = <0x5>; + interrupt-parent = <&gpio4>; irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + reg = <0x41>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ @@ -639,9 +640,9 @@ stmpe_adc: stmpe_adc { compatible = "st,stmpe-adc"; + #io-channel-cells = <1>; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; - #io-channel-cells = <1>; }; }; }; @@ -661,9 +662,9 @@ adv_7280: adv7280@21 { compatible = "adi,adv7280"; - reg = <0x21>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu1_csi0>; + reg = <0x21>; status = "disabled"; port { @@ -679,8 +680,8 @@ AVDD-supply = <&reg_ov5640_2v8_a_vdd>; DOVDD-supply = <&reg_ov5640_1v8_d_o_vdd>; DVDD-supply = <&reg_ov5640_1v8_d_o_vdd>; - clocks = <&clks IMX6QDL_CLK_CKO2>; clock-names = "xclk"; + clocks = <&clks IMX6QDL_CLK_CKO2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cam_mclk>; /* These GPIOs are muxed with the iomuxc node */ @@ -778,73 +779,73 @@ }; &uart1 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; &uart2 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; &uart4 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4_dte>; - fsl,dte-mode; status = "disabled"; }; &uart5 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5_dte>; - fsl,dte-mode; status = "disabled"; }; &usbotg { + disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; status = "disabled"; }; /* MMC1 */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; - cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&reg_module_3v3>; bus-width = <8>; + cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; disable-wp; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; + vqmmc-supply = <&reg_module_3v3>; status = "disabled"; }; /* SD1 */ &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - vqmmc-supply = <&reg_module_3v3>; bus-width = <4>; disable-wp; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vqmmc-supply = <&reg_module_3v3>; status = "disabled"; }; /* eMMC */ &usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <&reg_module_3v3>; bus-width = <8>; no-1-8-v; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <&reg_module_3v3>; status = "okay"; }; @@ -861,49 +862,49 @@ &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 >; - pinctrl_apalis_gpio1: gpio2io04grp { + pinctrl_apalis_gpio1: apalisgpio1grp { fsl,pins = < MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 >; }; - pinctrl_apalis_gpio2: gpio2io05grp { + pinctrl_apalis_gpio2: apalisgpio2grp { fsl,pins = < MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0 >; }; - pinctrl_apalis_gpio3: gpio2io06grp { + pinctrl_apalis_gpio3: apalisgpio3grp { fsl,pins = < MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0 >; }; - pinctrl_apalis_gpio4: gpio2io07grp { + pinctrl_apalis_gpio4: apalisgpio4grp { fsl,pins = < MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0 >; }; - pinctrl_apalis_gpio5: gpio6io10grp { + pinctrl_apalis_gpio5: apalisgpio5grp { fsl,pins = < MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0 >; }; - pinctrl_apalis_gpio6: gpio6io09grp { + pinctrl_apalis_gpio6: apalisgpio6grp { fsl,pins = < MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0 >; }; - pinctrl_apalis_gpio7: gpio1io02grp { + pinctrl_apalis_gpio7: apalisgpio7grp { fsl,pins = < MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0 >; }; - pinctrl_apalis_gpio8: gpio1io06grp { + pinctrl_apalis_gpio8: apalisgpio8grp { fsl,pins = < MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0 >; @@ -996,7 +997,7 @@ >; }; - pinctrl_gpio_bl_on: gpioblon { + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 >; @@ -1141,7 +1142,7 @@ >; }; - pinctrl_mmc_cd: gpiommccdgrp { + pinctrl_mmc_cd: mmccdgrp { fsl,pins = < /* MMC1 CD */ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0 @@ -1172,35 +1173,35 @@ >; }; - pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { + pinctrl_regulator_usbh_pwr: regusbhpwrgrp { fsl,pins = < /* USBH_EN */ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058 >; }; - pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp { + pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp { fsl,pins = < /* USBH_HUB_EN */ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058 >; }; - pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp { + pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp { fsl,pins = < /* USBO1 power en */ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058 >; }; - pinctrl_reset_moci: gpioresetmocigrp { + pinctrl_reset_moci: resetmocigrp { fsl,pins = < /* RESET_MOCI control */ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058 >; }; - pinctrl_sd_cd: gpiosdcdgrp { + pinctrl_sd_cd: sdcdgrp { fsl,pins = < /* SD1 CD */ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 @@ -1220,13 +1221,22 @@ >; }; - pinctrl_touch_int: gpiotouchintgrp { + pinctrl_touch_int: touchintgrp { fsl,pins = < /* STMPE811 interrupt */ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 >; }; + /* Additional DTR, DSR, DCD */ + pinctrl_uart1_ctrl: uart1ctrlgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + pinctrl_uart1_dce: uart1dcegrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 @@ -1244,15 +1254,6 @@ >; }; - /* Additional DTR, DSR, DCD */ - pinctrl_uart1_ctrl: uart1ctrlgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 - MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 - MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 - >; - }; - pinctrl_uart2_dce: uart2dcegrp { fsl,pins = < MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 @@ -1306,7 +1307,7 @@ >; }; - pinctrl_usdhc1_4bit: usdhc1grp_4bit { + pinctrl_usdhc1_4bit: usdhc1-4bitgrp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 @@ -1317,7 +1318,7 @@ >; }; - pinctrl_usdhc1_8bit: usdhc1grp_8bit { + pinctrl_usdhc1_8bit: usdhc1-8bitgrp { fsl,pins = < MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071

[v1,17/17] ARM: dts: imx6q-apalis: Cleanup

Commit Message

Patch