diff mbox series

[v8,3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog

Message ID 20220516163347.44890-3-nick.hawkins@hpe.com (mailing list archive)
State New, archived
Headers show
Series Introduce HPE GXP Architecture | expand

Commit Message

Hawkins, Nick May 16, 2022, 4:33 p.m. UTC
From: Nick Hawkins <nick.hawkins@hpe.com>

Add support for the HPE GXP Watchdog. The GXP asic contains a full
complement of timers one of which is the watchdog timer. The watchdog
timer is 16 bit and has 10ms resolution. The watchdog is created as a
child device of timer since the same register range is used.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>

---
v8:
* Fix comment format
v7:
* Change commit description to replace Adding with Add and compliment
  with complement
* Removed unused include files of_address.h and of_platform.h
* Fixed the max timeout on watchdog to be 655350
* Changed time variable computations in gxp_wdt_set_timeout to be clear
* Decreased reboot delay to 10ms from 100ms
* Added comment to explain why it is necessary to pass the base address
  over a private interface from the timer driver.
v6:
* No code change.
* Fixed commit subject line to match the ones in log.
* Adjusted commit message to be closer to 75 chars per line.
v5:
* Fixed version log
* Added details to Kconfig for module support.
* Adjusted commit messaged
v4:
* Made watchdog a child of timer as they share the same register region
  per change request on dtsi.
* Removed extra parenthesis
* Fixed u8 u32 u64 usage
* Fixed alignment issue
* Reconfigured conditional statement for interrupt setup
* Removed unused gxp_wdt_remove function
v3:
* Put into proper patchset format
v2:
* No change
---
 drivers/watchdog/Kconfig   |  11 +++
 drivers/watchdog/Makefile  |   1 +
 drivers/watchdog/gxp-wdt.c | 174 +++++++++++++++++++++++++++++++++++++
 3 files changed, 186 insertions(+)
 create mode 100644 drivers/watchdog/gxp-wdt.c

Comments

Guenter Roeck May 16, 2022, 9:28 p.m. UTC | #1
On Mon, May 16, 2022 at 11:33:41AM -0500, nick.hawkins@hpe.com wrote:
> From: Nick Hawkins <nick.hawkins@hpe.com>
> 
> Add support for the HPE GXP Watchdog. The GXP asic contains a full
> complement of timers one of which is the watchdog timer. The watchdog
> timer is 16 bit and has 10ms resolution. The watchdog is created as a
> child device of timer since the same register range is used.
> 
> Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> 
> ---
> v8:
> * Fix comment format
> v7:
> * Change commit description to replace Adding with Add and compliment
>   with complement
> * Removed unused include files of_address.h and of_platform.h
> * Fixed the max timeout on watchdog to be 655350
> * Changed time variable computations in gxp_wdt_set_timeout to be clear
> * Decreased reboot delay to 10ms from 100ms
> * Added comment to explain why it is necessary to pass the base address
>   over a private interface from the timer driver.
> v6:
> * No code change.
> * Fixed commit subject line to match the ones in log.
> * Adjusted commit message to be closer to 75 chars per line.
> v5:
> * Fixed version log
> * Added details to Kconfig for module support.
> * Adjusted commit messaged
> v4:
> * Made watchdog a child of timer as they share the same register region
>   per change request on dtsi.
> * Removed extra parenthesis
> * Fixed u8 u32 u64 usage
> * Fixed alignment issue
> * Reconfigured conditional statement for interrupt setup
> * Removed unused gxp_wdt_remove function
> v3:
> * Put into proper patchset format
> v2:
> * No change
> ---
>  drivers/watchdog/Kconfig   |  11 +++
>  drivers/watchdog/Makefile  |   1 +
>  drivers/watchdog/gxp-wdt.c | 174 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 186 insertions(+)
>  create mode 100644 drivers/watchdog/gxp-wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index c4e82a8d863f..a591cc6aa152 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1820,6 +1820,17 @@ config RALINK_WDT
>  	help
>  	  Hardware driver for the Ralink SoC Watchdog Timer.
>  
> +config GXP_WATCHDOG
> +	tristate "HPE GXP watchdog support"
> +	depends on ARCH_HPE_GXP
> +	select WATCHDOG_CORE
> +	help
> +	  Say Y here to include support for the watchdog timer
> +	  in HPE GXP SoCs.
> +
> +	  To compile this driver as a module, choose M here.
> +	  The module will be called gxp-wdt.
> +
>  config MT7621_WDT
>  	tristate "Mediatek SoC watchdog"
>  	select WATCHDOG_CORE
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index f7da867e8782..e2acf3a0d0fc 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -92,6 +92,7 @@ obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
>  obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
>  obj-$(CONFIG_PM8916_WATCHDOG) += pm8916_wdt.o
>  obj-$(CONFIG_ARM_SMC_WATCHDOG) += arm_smc_wdt.o
> +obj-$(CONFIG_GXP_WATCHDOG) += gxp-wdt.o
>  obj-$(CONFIG_VISCONTI_WATCHDOG) += visconti_wdt.o
>  obj-$(CONFIG_MSC313E_WATCHDOG) += msc313e_wdt.o
>  obj-$(CONFIG_APPLE_WATCHDOG) += apple_wdt.o
> diff --git a/drivers/watchdog/gxp-wdt.c b/drivers/watchdog/gxp-wdt.c
> new file mode 100644
> index 000000000000..b0b2d7a6fdde
> --- /dev/null
> +++ b/drivers/watchdog/gxp-wdt.c
> @@ -0,0 +1,174 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +#include <linux/watchdog.h>
> +
> +#define MASK_WDGCS_ENABLE	0x01
> +#define MASK_WDGCS_RELOAD	0x04
> +#define MASK_WDGCS_NMIEN	0x08
> +#define MASK_WDGCS_WARN		0x80
> +
> +#define WDT_MAX_TIMEOUT_MS	655350
> +#define WDT_DEFAULT_TIMEOUT	30
> +#define SECS_TO_WDOG_TICKS(x) ((x) * 100)
> +#define WDOG_TICKS_TO_SECS(x) ((x) / 100)
> +
> +#define GXP_WDT_CNT_OFS		0x10
> +#define GXP_WDT_CTRL_OFS	0x16
> +
> +struct gxp_wdt {
> +	void __iomem *base;
> +	struct watchdog_device wdd;
> +};
> +
> +static void gxp_wdt_enable_reload(struct gxp_wdt *drvdata)
> +{
> +	u8 val;
> +
> +	val = readb(drvdata->base + GXP_WDT_CTRL_OFS);
> +	val |= (MASK_WDGCS_ENABLE | MASK_WDGCS_RELOAD);
> +	writeb(val, drvdata->base + GXP_WDT_CTRL_OFS);
> +}
> +
> +static int gxp_wdt_start(struct watchdog_device *wdd)
> +{
> +	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
> +
> +	writew(SECS_TO_WDOG_TICKS(wdd->timeout), drvdata->base + GXP_WDT_CNT_OFS);
> +	gxp_wdt_enable_reload(drvdata);
> +	return 0;
> +}
> +
> +static int gxp_wdt_stop(struct watchdog_device *wdd)
> +{
> +	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
> +	u8 val;
> +
> +	val = readb_relaxed(drvdata->base + GXP_WDT_CTRL_OFS);
> +	val &= ~MASK_WDGCS_ENABLE;
> +	writeb(val, drvdata->base + GXP_WDT_CTRL_OFS);
> +	return 0;
> +}
> +
> +static int gxp_wdt_set_timeout(struct watchdog_device *wdd,
> +			       unsigned int timeout)
> +{
> +	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
> +	u32 actual;
> +
> +	wdd->timeout = timeout;
> +	actual = min(timeout * 100, wdd->max_hw_heartbeat_ms / 10);
> +	writew(actual, drvdata->base + GXP_WDT_CNT_OFS);
> +
> +	return 0;
> +}
> +
> +static unsigned int gxp_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> +	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
> +	u32 val = readw(drvdata->base + GXP_WDT_CNT_OFS);
> +
> +	return WDOG_TICKS_TO_SECS(val);
> +}
> +
> +static int gxp_wdt_ping(struct watchdog_device *wdd)
> +{
> +	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
> +
> +	gxp_wdt_enable_reload(drvdata);
> +	return 0;
> +}
> +
> +static int gxp_restart(struct watchdog_device *wdd, unsigned long action,
> +		       void *data)
> +{
> +	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
> +
> +	writew(1, drvdata->base + GXP_WDT_CNT_OFS);
> +	gxp_wdt_enable_reload(drvdata);
> +	mdelay(100);
> +	return 0;
> +}
> +
> +static const struct watchdog_ops gxp_wdt_ops = {
> +	.owner =	THIS_MODULE,
> +	.start =	gxp_wdt_start,
> +	.stop =		gxp_wdt_stop,
> +	.ping =		gxp_wdt_ping,
> +	.set_timeout =	gxp_wdt_set_timeout,
> +	.get_timeleft =	gxp_wdt_get_timeleft,
> +	.restart =	gxp_restart,
> +};
> +
> +static const struct watchdog_info gxp_wdt_info = {
> +	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
> +	.identity = "HPE GXP Watchdog timer",
> +};
> +
> +static int gxp_wdt_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct gxp_wdt *drvdata;
> +	int err;
> +	u8 val;
> +
> +	drvdata = devm_kzalloc(dev, sizeof(struct gxp_wdt), GFP_KERNEL);
> +	if (!drvdata)
> +		return -ENOMEM;
> +
> +	/*
> +	 * The register area where the timer and watchdog reside is disarranged.
> +	 * Hence mapping individual register blocks for the timer and watchdog
> +	 * is not recommended as they would have access to each others
> +	 * registers. Based on feedback the watchdog is no longer part of the
> +	 * device tree file and the timer driver now creates the watchdog as a
> +	 * child device. During the watchdogs creation, the timer driver passes
> +	 * the base address to the watchdog over the private interface.
> +	 */
> +
> +	drvdata->base = (void __iomem *)dev->platform_data;
> +
> +	drvdata->wdd.info = &gxp_wdt_info;
> +	drvdata->wdd.ops = &gxp_wdt_ops;
> +	drvdata->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
> +	drvdata->wdd.parent = dev;
> +	drvdata->wdd.timeout = WDT_DEFAULT_TIMEOUT;
> +
> +	watchdog_set_drvdata(&drvdata->wdd, drvdata);
> +	watchdog_set_nowayout(&drvdata->wdd, WATCHDOG_NOWAYOUT);
> +
> +	val = readb(drvdata->base + GXP_WDT_CTRL_OFS);
> +
> +	if (val & MASK_WDGCS_ENABLE)
> +		set_bit(WDOG_HW_RUNNING, &drvdata->wdd.status);
> +
> +	watchdog_set_restart_priority(&drvdata->wdd, 128);
> +
> +	watchdog_stop_on_reboot(&drvdata->wdd);
> +	err = devm_watchdog_register_device(dev, &drvdata->wdd);
> +	if (err) {
> +		dev_err(dev, "Failed to register watchdog device");
> +		return err;
> +	}
> +
> +	dev_info(dev, "HPE GXP watchdog timer");
> +
> +	return 0;
> +}
> +
> +static struct platform_driver gxp_wdt_driver = {
> +	.probe = gxp_wdt_probe,
> +	.driver = {
> +		.name =	"gxp-wdt",
> +	},
> +};
> +module_platform_driver(gxp_wdt_driver);
> +
> +MODULE_AUTHOR("Nick Hawkins <nick.hawkins@hpe.com>");
> +MODULE_AUTHOR("Jean-Marie Verdun <verdun@hpe.com>");
> +MODULE_DESCRIPTION("Driver for GXP watchdog timer");
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index c4e82a8d863f..a591cc6aa152 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1820,6 +1820,17 @@  config RALINK_WDT
 	help
 	  Hardware driver for the Ralink SoC Watchdog Timer.
 
+config GXP_WATCHDOG
+	tristate "HPE GXP watchdog support"
+	depends on ARCH_HPE_GXP
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  in HPE GXP SoCs.
+
+	  To compile this driver as a module, choose M here.
+	  The module will be called gxp-wdt.
+
 config MT7621_WDT
 	tristate "Mediatek SoC watchdog"
 	select WATCHDOG_CORE
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index f7da867e8782..e2acf3a0d0fc 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -92,6 +92,7 @@  obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
 obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
 obj-$(CONFIG_PM8916_WATCHDOG) += pm8916_wdt.o
 obj-$(CONFIG_ARM_SMC_WATCHDOG) += arm_smc_wdt.o
+obj-$(CONFIG_GXP_WATCHDOG) += gxp-wdt.o
 obj-$(CONFIG_VISCONTI_WATCHDOG) += visconti_wdt.o
 obj-$(CONFIG_MSC313E_WATCHDOG) += msc313e_wdt.o
 obj-$(CONFIG_APPLE_WATCHDOG) += apple_wdt.o
diff --git a/drivers/watchdog/gxp-wdt.c b/drivers/watchdog/gxp-wdt.c
new file mode 100644
index 000000000000..b0b2d7a6fdde
--- /dev/null
+++ b/drivers/watchdog/gxp-wdt.c
@@ -0,0 +1,174 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define MASK_WDGCS_ENABLE	0x01
+#define MASK_WDGCS_RELOAD	0x04
+#define MASK_WDGCS_NMIEN	0x08
+#define MASK_WDGCS_WARN		0x80
+
+#define WDT_MAX_TIMEOUT_MS	655350
+#define WDT_DEFAULT_TIMEOUT	30
+#define SECS_TO_WDOG_TICKS(x) ((x) * 100)
+#define WDOG_TICKS_TO_SECS(x) ((x) / 100)
+
+#define GXP_WDT_CNT_OFS		0x10
+#define GXP_WDT_CTRL_OFS	0x16
+
+struct gxp_wdt {
+	void __iomem *base;
+	struct watchdog_device wdd;
+};
+
+static void gxp_wdt_enable_reload(struct gxp_wdt *drvdata)
+{
+	u8 val;
+
+	val = readb(drvdata->base + GXP_WDT_CTRL_OFS);
+	val |= (MASK_WDGCS_ENABLE | MASK_WDGCS_RELOAD);
+	writeb(val, drvdata->base + GXP_WDT_CTRL_OFS);
+}
+
+static int gxp_wdt_start(struct watchdog_device *wdd)
+{
+	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+
+	writew(SECS_TO_WDOG_TICKS(wdd->timeout), drvdata->base + GXP_WDT_CNT_OFS);
+	gxp_wdt_enable_reload(drvdata);
+	return 0;
+}
+
+static int gxp_wdt_stop(struct watchdog_device *wdd)
+{
+	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+	u8 val;
+
+	val = readb_relaxed(drvdata->base + GXP_WDT_CTRL_OFS);
+	val &= ~MASK_WDGCS_ENABLE;
+	writeb(val, drvdata->base + GXP_WDT_CTRL_OFS);
+	return 0;
+}
+
+static int gxp_wdt_set_timeout(struct watchdog_device *wdd,
+			       unsigned int timeout)
+{
+	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+	u32 actual;
+
+	wdd->timeout = timeout;
+	actual = min(timeout * 100, wdd->max_hw_heartbeat_ms / 10);
+	writew(actual, drvdata->base + GXP_WDT_CNT_OFS);
+
+	return 0;
+}
+
+static unsigned int gxp_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+	u32 val = readw(drvdata->base + GXP_WDT_CNT_OFS);
+
+	return WDOG_TICKS_TO_SECS(val);
+}
+
+static int gxp_wdt_ping(struct watchdog_device *wdd)
+{
+	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+
+	gxp_wdt_enable_reload(drvdata);
+	return 0;
+}
+
+static int gxp_restart(struct watchdog_device *wdd, unsigned long action,
+		       void *data)
+{
+	struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+
+	writew(1, drvdata->base + GXP_WDT_CNT_OFS);
+	gxp_wdt_enable_reload(drvdata);
+	mdelay(100);
+	return 0;
+}
+
+static const struct watchdog_ops gxp_wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	gxp_wdt_start,
+	.stop =		gxp_wdt_stop,
+	.ping =		gxp_wdt_ping,
+	.set_timeout =	gxp_wdt_set_timeout,
+	.get_timeleft =	gxp_wdt_get_timeleft,
+	.restart =	gxp_restart,
+};
+
+static const struct watchdog_info gxp_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "HPE GXP Watchdog timer",
+};
+
+static int gxp_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gxp_wdt *drvdata;
+	int err;
+	u8 val;
+
+	drvdata = devm_kzalloc(dev, sizeof(struct gxp_wdt), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	/*
+	 * The register area where the timer and watchdog reside is disarranged.
+	 * Hence mapping individual register blocks for the timer and watchdog
+	 * is not recommended as they would have access to each others
+	 * registers. Based on feedback the watchdog is no longer part of the
+	 * device tree file and the timer driver now creates the watchdog as a
+	 * child device. During the watchdogs creation, the timer driver passes
+	 * the base address to the watchdog over the private interface.
+	 */
+
+	drvdata->base = (void __iomem *)dev->platform_data;
+
+	drvdata->wdd.info = &gxp_wdt_info;
+	drvdata->wdd.ops = &gxp_wdt_ops;
+	drvdata->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
+	drvdata->wdd.parent = dev;
+	drvdata->wdd.timeout = WDT_DEFAULT_TIMEOUT;
+
+	watchdog_set_drvdata(&drvdata->wdd, drvdata);
+	watchdog_set_nowayout(&drvdata->wdd, WATCHDOG_NOWAYOUT);
+
+	val = readb(drvdata->base + GXP_WDT_CTRL_OFS);
+
+	if (val & MASK_WDGCS_ENABLE)
+		set_bit(WDOG_HW_RUNNING, &drvdata->wdd.status);
+
+	watchdog_set_restart_priority(&drvdata->wdd, 128);
+
+	watchdog_stop_on_reboot(&drvdata->wdd);
+	err = devm_watchdog_register_device(dev, &drvdata->wdd);
+	if (err) {
+		dev_err(dev, "Failed to register watchdog device");
+		return err;
+	}
+
+	dev_info(dev, "HPE GXP watchdog timer");
+
+	return 0;
+}
+
+static struct platform_driver gxp_wdt_driver = {
+	.probe = gxp_wdt_probe,
+	.driver = {
+		.name =	"gxp-wdt",
+	},
+};
+module_platform_driver(gxp_wdt_driver);
+
+MODULE_AUTHOR("Nick Hawkins <nick.hawkins@hpe.com>");
+MODULE_AUTHOR("Jean-Marie Verdun <verdun@hpe.com>");
+MODULE_DESCRIPTION("Driver for GXP watchdog timer");