@@ -207,7 +207,7 @@ static int samsung_ufs_phy_init(struct phy *phy)
ss_phy->lane_cnt = phy->attrs.bus_width;
ss_phy->ufs_phy_state = CFG_PRE_INIT;
- if (ss_phy->drvdata->has_symbol_clk) {
+ if (ss_phy->has_symbol_clk) {
ret = samsung_ufs_phy_symbol_clk_init(ss_phy);
if (ret)
dev_err(ss_phy->dev, "failed to set ufs phy symbol clocks\n");
@@ -259,7 +259,7 @@ static int samsung_ufs_phy_exit(struct phy *phy)
clk_disable_unprepare(ss_phy->ref_clk);
- if (ss_phy->drvdata->has_symbol_clk) {
+ if (ss_phy->has_symbol_clk) {
clk_disable_unprepare(ss_phy->tx0_symbol_clk);
clk_disable_unprepare(ss_phy->rx0_symbol_clk);
clk_disable_unprepare(ss_phy->rx1_symbol_clk);
@@ -326,9 +326,10 @@ static int samsung_ufs_phy_probe(struct platform_device *pdev)
drvdata = match->data;
phy->dev = dev;
- phy->drvdata = drvdata;
phy->cfgs = drvdata->cfgs;
- phy->isol = &drvdata->isol;
+ phy->has_symbol_clk = drvdata->has_symbol_clk;
+ memcpy(&phy->isol, &drvdata->isol, sizeof(phy->isol));
+
phy->lane_cnt = PHY_DEF_LANE_CNT;
phy_set_drvdata(gen_phy, phy);
@@ -101,13 +101,15 @@ struct samsung_ufs_phy_cfg {
u8 id;
};
+struct samsung_ufs_phy_pmu_isol {
+ u32 offset;
+ u32 mask;
+ u32 en;
+};
+
struct samsung_ufs_phy_drvdata {
const struct samsung_ufs_phy_cfg **cfgs;
- struct pmu_isol {
- u32 offset;
- u32 mask;
- u32 en;
- } isol;
+ struct samsung_ufs_phy_pmu_isol isol;
bool has_symbol_clk;
};
@@ -120,9 +122,9 @@ struct samsung_ufs_phy {
struct clk *tx0_symbol_clk;
struct clk *rx0_symbol_clk;
struct clk *rx1_symbol_clk;
- const struct samsung_ufs_phy_drvdata *drvdata;
const struct samsung_ufs_phy_cfg **cfgs;
- const struct pmu_isol *isol;
+ struct samsung_ufs_phy_pmu_isol isol;
+ bool has_symbol_clk;
u8 lane_cnt;
int ufs_phy_state;
enum phy_mode mode;
@@ -136,8 +138,8 @@ static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy *phy)
static inline void samsung_ufs_phy_ctrl_isol(
struct samsung_ufs_phy *phy, u32 isol)
{
- regmap_update_bits(phy->reg_pmu, phy->isol->offset,
- phy->isol->mask, isol ? 0 : phy->isol->en);
+ regmap_update_bits(phy->reg_pmu, phy->isol.offset,
+ phy->isol.mask, isol ? 0 : phy->isol.en);
}
extern const struct samsung_ufs_phy_drvdata exynos7_ufs_phy;
To change an offset of pmu_isol, we need to store its data instead of having drvdata's pointer. The definition of the pmu_isol structure should be extracted from samsung_ufs_phy_drvdata and rename the name with samsung_ufs_phy_ prefix. Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> --- drivers/phy/samsung/phy-samsung-ufs.c | 9 +++++---- drivers/phy/samsung/phy-samsung-ufs.h | 20 +++++++++++--------- 2 files changed, 16 insertions(+), 13 deletions(-)