diff mbox series

[31/36] serial: imx: Remove serial_rs485 sanitization

Message ID 20220606100433.13793-32-ilpo.jarvinen@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series RS485 serial_rs485 sanitization | expand

Commit Message

Ilpo Järvinen June 6, 2022, 10:04 a.m. UTC 
The driver provides different rs485_supported for the case where RTS is
not available making it unnecessary to handle it in
imx_uart_rs485_config.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/imx.c | 4 ----
 1 file changed, 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index ba853bc9b4db..1e96ddd2e262 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1913,10 +1913,6 @@  static int imx_uart_rs485_config(struct uart_port *port,
 	struct imx_port *sport = (struct imx_port *)port;
 	u32 ucr2;
 
-	/* RTS is required to control the transmitter */
-	if (!sport->have_rtscts && !sport->have_rtsgpio)
-		rs485conf->flags &= ~SER_RS485_ENABLED;
-
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		/* Enable receiver if low-active RTS signal is requested */
 		if (sport->have_rtscts &&  !sport->have_rtsgpio &&