@@ -32,6 +32,8 @@
#define PCIE_CORE_DEV_ID_REG 0x0
#define PCIE_CORE_CMD_STATUS_REG 0x4
#define PCIE_CORE_DEV_REV_REG 0x8
+#define PCIE_CORE_SSDEV_ID_REG 0x2c
+#define PCIE_CORE_EXP_ROM_BAR_REG 0x30
#define PCIE_CORE_PCIEXP_CAP 0xc0
#define PCIE_CORE_ERR_CAPCTL_REG 0x118
#define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
@@ -982,6 +984,8 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
/* Indicates supports for Completion Retry Status */
bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
+ bridge->subsystem_vendor_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) & 0xffff;
+ bridge->subsystem_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) >> 16;
bridge->has_pcie = true;
bridge->data = pcie;
bridge->ops = &advk_pci_bridge_emul_ops;
Register with Subsystem Device/Vendor ID is at offset 0x2c. Export is via emulated bridge. After this change Subsystem ID is visible in lspci output at line: Capabilities: [40] Subsystem Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/pci/controller/pci-aardvark.c | 4 ++++ 1 file changed, 4 insertions(+)