diff mbox series

[V2,3/3] arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs

Message ID 20220718132100.13277-3-zajec5@gmail.com (mailing list archive)
State New, archived
Headers show
Series [V2,1/3] arm64: dts: broadcom: bcm4908: add remaining LED pins | expand

Commit Message

Rafał Miłecki July 18, 2022, 1:21 p.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

There are 5 software-controllable LEDs on PCB.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: Include header & adjust nodes names
---
 .../bcm4908/bcm4908-asus-gt-ac5300.dts        | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

Comments

Florian Fainelli July 21, 2022, 11:16 p.m. UTC | #1 
On Mon, 18 Jul 2022 15:21:00 +0200, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> There are 5 software-controllable LEDs on PCB.
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree-arm64/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 169fbb7cfd34..5862db5cab2f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -2,6 +2,7 @@ 
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 #include "bcm4908.dtsi"
 
@@ -118,6 +119,53 @@  ethernet-phy@3 {
 	};
 };
 
+&leds {
+	led-power@11 {
+		reg = <0x11>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_WHITE>;
+		default-state = "on";
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_17_a>;
+	};
+
+	led-wan-red@12 {
+		reg = <0x12>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_RED>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_18_a>;
+	};
+
+	led-wps@14 {
+		reg = <0x14>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_WHITE>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_20_a>;
+	};
+
+	led-wan-white@15 {
+		reg = <0x15>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_WHITE>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_21_a>;
+	};
+
+	led-lan@19 {
+		reg = <0x19>;
+		function = LED_FUNCTION_LAN;
+		color = <LED_COLOR_ID_WHITE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_25_a>;
+	};
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;