diff mbox series

[v1,2/5] spi: dt-bindings: add documentation for hpe,gxp-spifi

Message ID 20220720201158.78068-3-nick.hawkins@hpe.com (mailing list archive)
State New, archived
Headers show
Series Add SPI Driver to HPE GXP Architecture | expand

Commit Message

Hawkins, Nick July 20, 2022, 8:11 p.m. UTC
From: Nick Hawkins <nick.hawkins@hpe.com>

Create documentation for the hpe,gxp-spifi binding to support access to
the SPI parts

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
---
 .../bindings/spi/hpe,gxp-spifi.yaml           | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml

Comments

Rob Herring July 21, 2022, 2:39 p.m. UTC | #1
On Wed, 20 Jul 2022 15:11:55 -0500, nick.hawkins@hpe.com wrote:
> From: Nick Hawkins <nick.hawkins@hpe.com>
> 
> Create documentation for the hpe,gxp-spifi binding to support access to
> the SPI parts
> 
> Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
> ---
>  .../bindings/spi/hpe,gxp-spifi.yaml           | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.example.dtb: spi@200: Unevaluated properties are not allowed ('interrupt-parrent' was unexpected)
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Krzysztof Kozlowski July 21, 2022, 3:03 p.m. UTC | #2
On 20/07/2022 22:11, nick.hawkins@hpe.com wrote:
> From: Nick Hawkins <nick.hawkins@hpe.com>
> 
> Create documentation for the hpe,gxp-spifi binding to support access to
> the SPI parts
> 
> Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
> ---
>  .../bindings/spi/hpe,gxp-spifi.yaml           | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
> new file mode 100644
> index 000000000000..015130ecf971
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/hpe,gxp-spifi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HPE GXP spi controller flash interface
> +
> +maintainers:
> +  - Nick Hawkins <nick.hawkins@hpe.com>
> +  - Jean-Marie Verdun <verdun@hpe.com>
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    const: hpe,gxp-spifi
> +
> +  reg:
> +    items:
> +      - description: cfg registers
> +      - description: data registers
> +      - description: mapped memory
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +
> +    spi@200 {
> +        compatible = "hpe,gxp-spifi";
> +        reg = <0x200 0x80>, <0xc000 0x100>, <0x38000000 0x800000>;
> +        interrupts = <20>;
> +        interrupt-parrent = <&vic0>;

Wrong property.

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        flash@0 {
> +                reg = < 0 >;

Wrong indentation, no spaces for <.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
new file mode 100644
index 000000000000..015130ecf971
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
@@ -0,0 +1,56 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/hpe,gxp-spifi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP spi controller flash interface
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: hpe,gxp-spifi
+
+  reg:
+    items:
+      - description: cfg registers
+      - description: data registers
+      - description: mapped memory
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    spi@200 {
+        compatible = "hpe,gxp-spifi";
+        reg = <0x200 0x80>, <0xc000 0x100>, <0x38000000 0x800000>;
+        interrupts = <20>;
+        interrupt-parrent = <&vic0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+                reg = < 0 >;
+                compatible = "jedec,spi-nor";
+        };
+
+        flash@1 {
+                reg = < 1 >;
+                compatible = "jedec,spi-nor";
+        };
+    };