diff mbox series

[v1,05/12] ARM: dts: imx7d-pico: indent use tabs, no spaces at start of line

Message ID 20220721195936.1082422-6-marcel@ziswiler.com (mailing list archive)
State New, archived
Headers show
Series ARM: arm64: dts/clk: imx8mm: indentation whitespace cleanup | expand

Commit Message

Marcel Ziswiler July 21, 2022, 7:59 p.m. UTC 
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Avoid the following checkpatch warning:

arch/arm/boot/dts/imx7d-pico.dtsi:44: error: code indent should use tabs
 where possible
arch/arm/boot/dts/imx7d-pico.dtsi:44: warning: please, no spaces at the
 start of a line

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

 arch/arm/boot/dts/imx7d-pico.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e519897fae08..e0bff39e8d3e 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -41,7 +41,7 @@  reg_lcd_3v3: regulator-lcd-3v3 {
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-        };
+	};
 
 	reg_wlreg_on: regulator-wlreg_on {
 		compatible = "regulator-fixed";
@@ -432,7 +432,7 @@  MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
 			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
 			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			MX7D_PAD_SD3_RESET_B__GPIO6_IO11                0x1  /* Ethernet reset */
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11		0x1  /* Ethernet reset */
 		>;
 	};
 
@@ -493,19 +493,19 @@  MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14
 
 	pinctrl_pwm1: pwm1 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT	0x7f
 		>;
 	};
 
 	pinctrl_pwm2: pwm2 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT   0x7f
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT	0x7f
 		>;
 	};
 
 	pinctrl_pwm3: pwm3 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT   0x7f
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT	0x7f
 		>;
 	};