[v3,1/3] dt-bindings: memory-controller: Document Broadcom STB MEMC

Commit Message

Florian Fainelli Aug. 1, 2022, 10:09 p.m. UTC

Document the Broadcom STB memory controller which is a trivial binding
for now with a set of compatible strings and single register.

Since we introduce this binding, the section in
Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt is removed
and this binding is referenced instead.

Reviewed-by: Rob Herring <[e-mail]>
Signed-off-by: Florian Fainelli <[e-mail]>
---
 .../bindings/arm/bcm/brcm,brcmstb.txt         | 11 +---
 .../brcm,brcmstb-memc-ddr.yaml                | 52 +++++++++++++++++++
 2 files changed, 54 insertions(+), 9 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml

Patch

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index 104cc9b41df4..e797d2f69f3b 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -187,15 +187,8 @@  Required properties:
 Sequencer DRAM parameters and control registers. Used for Self-Refresh
 Power-Down (SRPD), among other things.
 
-Required properties:
-- compatible     : should contain one of these
-	"brcm,brcmstb-memc-ddr-rev-b.2.1"
-	"brcm,brcmstb-memc-ddr-rev-b.2.2"
-	"brcm,brcmstb-memc-ddr-rev-b.2.3"
-	"brcm,brcmstb-memc-ddr-rev-b.3.0"
-	"brcm,brcmstb-memc-ddr-rev-b.3.1"
-	"brcm,brcmstb-memc-ddr"
-- reg            : the MEMC DDR register range
+See Documentation/devicetree/bindings/memory-controllers/brcm,memc.yaml for a
+full list of supported compatible strings and properties.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
new file mode 100644
index 000000000000..4b072c879b02
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
@@ -0,0 +1,52 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/brcm,brcmstb-memc-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory controller (MEMC) for Broadcom STB
+
+maintainers:
+  - Florian Fainelli <[e-mail]>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,brcmstb-memc-ddr-rev-b.1.x
+          - brcm,brcmstb-memc-ddr-rev-b.2.0
+          - brcm,brcmstb-memc-ddr-rev-b.2.1
+          - brcm,brcmstb-memc-ddr-rev-b.2.2
+          - brcm,brcmstb-memc-ddr-rev-b.2.3
+          - brcm,brcmstb-memc-ddr-rev-b.2.5
+          - brcm,brcmstb-memc-ddr-rev-b.2.6
+          - brcm,brcmstb-memc-ddr-rev-b.2.7
+          - brcm,brcmstb-memc-ddr-rev-b.2.8
+          - brcm,brcmstb-memc-ddr-rev-b.3.0
+          - brcm,brcmstb-memc-ddr-rev-b.3.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.0
+          - brcm,brcmstb-memc-ddr-rev-c.1.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.2
+          - brcm,brcmstb-memc-ddr-rev-c.1.3
+          - brcm,brcmstb-memc-ddr-rev-c.1.4
+      - const: brcm,brcmstb-memc-ddr
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: DDR PHY frequency in Hz
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@9902000 {
+        compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", "brcm,brcmstb-memc-ddr";
+        reg = <0x9902000 0x600>;
+        clock-frequency = <2133000000>;
+    };