| Message ID | 20220810094000.248487-1-mranostay@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | J721S2: Add support for additional IPs | expand |
Hi Matt, On 10/08/22 15:09, Matt Ranostay wrote: > From: Aswath Govindraju <a-govindraju@ti.com> > > Add support for single instance of USB 3.0 controller in J721S2 SoC. > > Cc: Vignesh Raghavendra <vigneshr@ti.com> > Cc: Nishanth Menon <nm@ti.com> > Acked-by: Matt Ranostay <mranostay@ti.com> > Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> > --- > arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 42 ++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > index 34e7d577ae13..f7e359da8690 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > @@ -26,6 +26,20 @@ l3cache-sram@200000 { > }; > }; > > + scm_conf: scm-conf@104000 { syscon@ > + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; > + reg = <0x00 0x00104000 0x00 0x18000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x00 0x00 0x00104000 0x18000>; > + > + usb_serdes_mux: mux-controller@0 { mux-controller-0 I see that the mux-controller@0 node gets renamed to mux-controller@1 in 2/6. Why not move both to 2/6? > + compatible = "mmio-mux"; > + #mux-control-cells = <1>; > + mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ > + }; > + }; > + > gic500: interrupt-controller@1800000 { > compatible = "arm,gic-v3"; > #address-cells = <2>; > @@ -686,6 +700,34 @@ cpts@310d0000 { > }; > }; > > + usbss0: cdns-usb@4104000 { > + compatible = "ti,j721e-usb"; > + reg = <0x00 0x04104000 0x00 0x100>; > + clocks = <&k3_clks 360 16>, <&k3_clks 360 15>; > + clock-names = "ref", "lpm"; > + assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */ > + assigned-clock-parents = <&k3_clks 360 17>; > + power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + dma-coherent; > + > + usb0: usb@6000000 { > + compatible = "cdns,usb3"; > + reg = <0x00 0x06000000 0x00 0x10000>, > + <0x00 0x06010000 0x00 0x10000>, > + <0x00 0x06020000 0x00 0x10000>; > + reg-names = "otg", "xhci", "dev"; > + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "host", "peripheral", "otg"; > + maximum-speed = "super-speed"; > + dr_mode = "otg"; > + }; > + }; > + > main_mcan0: can@2701000 { > compatible = "bosch,m_can"; > reg = <0x00 0x02701000 0x00 0x200>,
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 34e7d577ae13..f7e359da8690 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -26,6 +26,20 @@ l3cache-sram@200000 { }; }; + scm_conf: scm-conf@104000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x00104000 0x00 0x18000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00104000 0x18000>; + + usb_serdes_mux: mux-controller@0 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -686,6 +700,34 @@ cpts@310d0000 { }; }; + usbss0: cdns-usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x04104000 0x00 0x100>; + clocks = <&k3_clks 360 16>, <&k3_clks 360 15>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 360 17>; + power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x06000000 0x00 0x10000>, + <0x00 0x06010000 0x00 0x10000>, + <0x00 0x06020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + main_mcan0: can@2701000 { compatible = "bosch,m_can"; reg = <0x00 0x02701000 0x00 0x200>,