diff mbox series

[v1,2/2] arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity

Message ID 20220812213905.216065-3-marcel@ziswiler.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: freescale: verdin-imx8mm/p: fix atmel_mxt_ts reset polarity | expand

Commit Message

Marcel Ziswiler Aug. 12, 2022, 9:39 p.m. UTC 
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Fix reset GPIO polarity in-line with the following commit feedaacdadfc
("Input: atmel_mxt_ts - fix up inverted RESET handler").

Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index c5987bdbb383..1c74c6a19449 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -628,7 +628,7 @@  atmel_mxt_ts_mezzanine: touch-mezzanine@4a {
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reg = <0x4a>;
 		/* Verdin GPIO_2 (SODIMM 208) */
-		reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};
 };
@@ -705,7 +705,7 @@  atmel_mxt_ts: touch@4a {
 		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
 		reg = <0x4a>;
 		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
-		reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 		status = "disabled";
 	};