diff mbox series

[v4,7/8] arm64: dts: imx8mm-kontron: Add SPI NOR partition layout

Message ID 20220822080357.24478-8-frieder@fris.de (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8mm-kontron: Improvements and OSM board support | expand

Commit Message

Frieder Schrempf Aug. 22, 2022, 8:03 a.m. UTC 
From: Frieder Schrempf <frieder.schrempf@kontron.de>

This is the layout used by the bootloader. Add it to the kernel
devicetree to make the same layout available in Linux and have
the devicetrees synced.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Changes in v4:
* fix hex values in reg to be lowercase
* fix unit addresses to match reg

Changes in v3:
* rebase on v6.0-rc1

Changes in v2:
* new patch
---
 .../boot/dts/freescale/imx8mm-kontron-sl.dtsi | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
index ce9c27619e26..0679728d2489 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -66,6 +66,27 @@  flash@0 {
 		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
 		spi-max-frequency = <80000000>;
 		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1e0000>;
+			};
+
+			partition@1e0000 {
+				label = "env";
+				reg = <0x1e0000 0x10000>;
+			};
+
+			partition@1f0000 {
+				label = "env_redundant";
+				reg = <0x1f0000 0x10000>;
+			};
+		};
 	};
 };