diff mbox series

[v4,1/2] ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi

Message ID 20220823075850.575043-2-patrice.chotard@foss.st.com (mailing list archive)
State New, archived
Headers show
Series spi: stm32_qspi: use QSPI bus as 8 lines communication channel | expand

Commit Message

Patrice CHOTARD Aug. 23, 2022, 7:58 a.m. UTC 
From: Patrice Chotard <patrice.chotard@foss.st.com>

Create a separate pinmux for qspi chip select in stm32mp15-pinctrl.dtsi.
In the case we want to use transfer_one() API to communicate with a SPI
device, chip select signal must be driven individually.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 50 ++++++++++++++++--------
 arch/arm/boot/dts/stm32mp157c-ev1.dts    | 12 +++++-
 2 files changed, 43 insertions(+), 19 deletions(-)

Comments

Alexandre TORGUE Aug. 26, 2022, 8:44 a.m. UTC | #1 
Dear Patrice

On 8/23/22 09:58, patrice.chotard@foss.st.com wrote:
> From: Patrice Chotard <patrice.chotard@foss.st.com>
> 
> Create a separate pinmux for qspi chip select in stm32mp15-pinctrl.dtsi.
> In the case we want to use transfer_one() API to communicate with a SPI
> device, chip select signal must be driven individually.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 50 ++++++++++++++++--------
>   arch/arm/boot/dts/stm32mp157c-ev1.dts    | 12 +++++-
>   2 files changed, 43 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index 6052243ad81c..ade4fab45f14 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -1189,7 +1189,7 @@ pins {
>   	};
> 
Applied on stm32-next.

Thanks.
Alex
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 6052243ad81c..ade4fab45f14 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1189,7 +1189,7 @@  pins {
 	};
 
 	qspi_bk1_pins_a: qspi-bk1-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
 				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
 				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
@@ -1198,12 +1198,6 @@  pins1 {
 			drive-push-pull;
 			slew-rate = <1>;
 		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
-			bias-pull-up;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
 	};
 
 	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
@@ -1211,13 +1205,12 @@  pins {
 			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
 				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
 				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
-				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
-				 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+				 <STM32_PINMUX('F', 6, ANALOG)>; /* QSPI_BK1_IO3 */
 		};
 	};
 
 	qspi_bk2_pins_a: qspi-bk2-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
 				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
 				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
@@ -1226,7 +1219,34 @@  pins1 {
 			drive-push-pull;
 			slew-rate = <1>;
 		};
-		pins2 {
+	};
+
+	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_BK2_IO3 */
+		};
+	};
+
+	qspi_cs1_pins_a: qspi-cs1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_cs2_pins_a: qspi-cs2-0 {
+		pins {
 			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
 			bias-pull-up;
 			drive-push-pull;
@@ -1234,13 +1254,9 @@  pins2 {
 		};
 	};
 
-	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+	qspi_cs2_sleep_pins_a: qspi-cs2-sleep-0 {
 		pins {
-			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
-				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
-				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
-				 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
-				 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
 		};
 	};
 
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index d142dd30e16b..050c3c27a420 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -255,8 +255,16 @@  &m_can1 {
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a
+		     &qspi_bk2_pins_a
+		     &qspi_cs2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a
+		     &qspi_bk2_sleep_pins_a
+		     &qspi_cs2_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;