diff mbox series

[v2,03/11] arm64: dts: ls1043a: use pcie aer/pme interrupts

Message ID 20220914214703.29706-4-leoyang.li@nxp.com (mailing list archive)
State New, archived
Headers show
Series accumulated dts updates for ls1043a | expand

Commit Message

Leo Li Sept. 14, 2022, 9:46 p.m. UTC 
After the binding has been updated to include more specific interrupt
definition, update the dts to use the more specific interrupt names.

Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3ba66b18de35..d04d4ac66d2a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -883,9 +883,9 @@  pcie1: pcie@3400000 {
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>, /* controller interrupt */
-				     <0 117 0x4>; /* PME interrupt */
-			interrupt-names = "intr", "pme";
+			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -909,9 +909,9 @@  pcie2: pcie@3500000 {
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 128 0x4>,
-				     <0 127 0x4>;
-			interrupt-names = "intr", "pme";
+			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -935,9 +935,9 @@  pcie3: pcie@3600000 {
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 162 0x4>,
-				     <0 161 0x4>;
-			interrupt-names = "intr", "pme";
+			interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";