diff mbox series

[v1,4/8] arm64: dts: verdin-imx8mm: verdin-imx8mp: rename sn65dsi83 to sn65dsi84

Message ID 20220922162925.2368577-5-marcel@ziswiler.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: verdin-imx8mm: verdin-imx8mp: pcie. et. al. | expand

Commit Message

Marcel Ziswiler Sept. 22, 2022, 4:29 p.m. UTC 
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Rename sn65dsi83 to sn65dsi84 as that is the exact chip used on the
Verdin DSI to LVDS Adapter.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

Comments

Shawn Guo Oct. 23, 2022, 1:10 p.m. UTC | #1 
On Thu, Sep 22, 2022 at 06:29:21PM +0200, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> 
> Rename sn65dsi83 to sn65dsi84 as that is the exact chip used on the
> Verdin DSI to LVDS Adapter.
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index a749d063c367..0c2582402087 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -595,7 +595,7 @@  atmel_mxt_ts: touch@4a {
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio3>;
 		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index ee4231d138fe..7be7e922927b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -664,8 +664,8 @@  gpio_expander_21: gpio-expander@21 {
 		status = "disabled";
 	};
 
-	lvds_ti_sn65dsi83: bridge@2c {
-		compatible = "ti,sn65dsi83";
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
 		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
 		/* Verdin GPIO_10_DSI (SODIMM 21) */
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
@@ -698,7 +698,7 @@  atmel_mxt_ts: touch@4a {
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio4>;
 		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;