| Message ID | 20221012102121.1747491-4-dan.scally@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Debix Model A board devicetree | expand |
Quoting Daniel Scally (2022-10-12 11:21:21) > Add a device tree file describing the Debix Model A board from > Polyhex Technology Co. > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> I've just applied this series to a vanilla tree, built and booted the debix board with it. I have working ethernet, and a console, so that's enough for me to say this here: Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > --- > Changes in v3 (Laurent): > > - Added IOB copyright notice > - Removed the eth node for the connector that's on the separate I/O > board > - Re-ordered some pinctrl groups so they're alphabetical > > Changes in v2: > > - Fixed the interrupt flag for i2c1/pmic@25 > - Fixed the node name for i2c4/rtc@51 (was "hym8563@51") > - Fixed a group control name that didn't match the bindings pattern > - Re-compared the rest of the DT with the EVK's .dts file to try to > make sure it complies with the way things should be, hopefully without > missing anything... > > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../dts/freescale/imx8mp-debix-model-a.dts | 529 ++++++++++++++++++ > 2 files changed, 530 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 8bf7f7ecebaa..6a33a08946ac 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > new file mode 100644 > index 000000000000..5549ceea3af6 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > @@ -0,0 +1,529 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2019 NXP > + * Copyright 2022 Ideas on Board Oy > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/usb/pd.h> > + > +#include "imx8mp.dtsi" > + > +/ { > + model = "Polyhex Debix Model A i.MX8MPlus board"; > + compatible = "polyhex,imx8mp-debix-model-a", "fsl,imx8mp"; > + > + chosen { > + stdout-path = &uart2; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_led>; > + > + status-led { > + function = LED_FUNCTION_POWER; > + color = <LED_COLOR_ID_RED>; > + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + }; > + > + reg_usdhc2_vmmc: regulator-usdhc2 { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; > + regulator-name = "VSD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > +}; > + > +&A53_0 { > + cpu-supply = <&buck2>; > +}; > + > +&A53_1 { > + cpu-supply = <&buck2>; > +}; > + > +&A53_2 { > + cpu-supply = <&buck2>; > +}; > + > +&A53_3 { > + cpu-supply = <&buck2>; > +}; > + > +&eqos { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_eqos>; > + phy-connection-type = "rgmii-id"; > + phy-handle = <ðphy0>; > + status = "okay"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy0: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; > + reset-assert-us = <20>; > + reset-deassert-us = <200000>; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + pmic@25 { > + reg = <0x25>; > + compatible = "nxp,pca9450c"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pmic>; > + interrupt-parent = <&gpio1>; > + interrupts = <3 IRQ_TYPE_EDGE_RISING>; > + > + regulators { > + buck1: BUCK1 { > + regulator-name = "BUCK1"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <2187500>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + buck2: BUCK2 { > + regulator-name = "BUCK2"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <2187500>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + nxp,dvs-run-voltage = <950000>; > + nxp,dvs-standby-voltage = <850000>; > + }; > + > + buck4: BUCK4{ > + regulator-name = "BUCK4"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck5: BUCK5{ > + regulator-name = "BUCK5"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck6: BUCK6 { > + regulator-name = "BUCK6"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <1600000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo2: LDO2 { > + regulator-name = "LDO2"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1150000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo3: LDO3 { > + regulator-name = "LDO3"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo4: LDO4 { > + regulator-name = "LDO4"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo5: LDO5 { > + regulator-name = "LDO5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > +}; > + > +&i2c4 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c4>; > + status = "okay"; > + > + eeprom@50 { > + compatible = "atmel,24c02"; > + reg = <0x50>; > + pagesize = <16>; > + }; > + > + rtc@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "xin32k"; > + interrupt-parent = <&gpio2>; > + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rtc_int>; > + }; > +}; > + > +&i2c6 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c6>; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + pinctrl_eqos: eqosgrp { > + fsl,pins = < > + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 > + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 > + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 > + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 > + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 > + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 > + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 > + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 > + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f > + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f > + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f > + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f > + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f > + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f > + MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x1f > + MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1f > + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19 > + >; > + }; > + > + pinctrl_fec: fecgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 > + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 > + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 > + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 > + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 > + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 > + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 > + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 > + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f > + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f > + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f > + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f > + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f > + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f > + MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x1f > + MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x1f > + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19 > + >; > + }; > + > + pinctrl_gpio_led: gpioledgrp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 > + >; > + }; > + > + pinctrl_hog: hoggrp { > + fsl,pins = < > + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3 > + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3 > + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019 > + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 > + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 > + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 > + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 > + >; > + }; > + pinctrl_i2c4: i2c4grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 > + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_i2c6: i2c6grp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3 > + MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_pmic: pmicirqgrp { > + fsl,pins = < > + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 > + >; > + }; > + > + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 > + >; > + }; > + > + pinctrl_rtc_int: rtcintgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f > + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49 > + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 > + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 > + >; > + }; > + > + pinctrl_usb1_vbus: usb1grp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19 > + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x19 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 > + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 > + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 > + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_gpio: usdhc2gpiogrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 > + >; > + }; > +}; > + > +&snvs_pwrkey { > + status = "okay"; > +}; > + > +&uart2 { > + /* console */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>; > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>; > + status = "okay"; > +}; > + > +/* SD Card */ > +&usdhc2 { > + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; > + assigned-clock-rates = <400000000>; > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + vmmc-supply = <®_usdhc2_vmmc>; > + bus-width = <4>; > + status = "okay"; > +}; > + > +/* eMMc */ > +&usdhc3 { > + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; > + assigned-clock-rates = <400000000>; > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + bus-width = <8>; > + non-removable; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > -- > 2.34.1 >
Quoting Kieran Bingham (2022-10-12 18:13:40) > Quoting Daniel Scally (2022-10-12 11:21:21) > > Add a device tree file describing the Debix Model A board from > > Polyhex Technology Co. > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> > > I've just applied this series to a vanilla tree, built and booted the > debix board with it. Ooops, that wasn't accurate. It wasn't a vanilla tree, it was a merged tree. But I think it's fine, I still tested the DT, and basic functionality. -- Kieran > I have working ethernet, and a console, so that's enough for me to say > this here: > > Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > > > --- > > Changes in v3 (Laurent): > > > > - Added IOB copyright notice > > - Removed the eth node for the connector that's on the separate I/O > > board > > - Re-ordered some pinctrl groups so they're alphabetical > > > > Changes in v2: > > > > - Fixed the interrupt flag for i2c1/pmic@25 > > - Fixed the node name for i2c4/rtc@51 (was "hym8563@51") > > - Fixed a group control name that didn't match the bindings pattern > > - Re-compared the rest of the DT with the EVK's .dts file to try to > > make sure it complies with the way things should be, hopefully without > > missing anything... > > > > arch/arm64/boot/dts/freescale/Makefile | 1 + > > .../dts/freescale/imx8mp-debix-model-a.dts | 529 ++++++++++++++++++ > > 2 files changed, 530 insertions(+) > > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > > > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > > index 8bf7f7ecebaa..6a33a08946ac 100644 > > --- a/arch/arm64/boot/dts/freescale/Makefile > > +++ b/arch/arm64/boot/dts/freescale/Makefile > > @@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb > > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > > new file mode 100644 > > index 000000000000..5549ceea3af6 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > > @@ -0,0 +1,529 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright 2019 NXP > > + * Copyright 2022 Ideas on Board Oy > > + */ > > + > > +/dts-v1/; > > + > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/leds/common.h> > > +#include <dt-bindings/usb/pd.h> > > + > > +#include "imx8mp.dtsi" > > + > > +/ { > > + model = "Polyhex Debix Model A i.MX8MPlus board"; > > + compatible = "polyhex,imx8mp-debix-model-a", "fsl,imx8mp"; > > + > > + chosen { > > + stdout-path = &uart2; > > + }; > > + > > + gpio-leds { > > + compatible = "gpio-leds"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_gpio_led>; > > + > > + status-led { > > + function = LED_FUNCTION_POWER; > > + color = <LED_COLOR_ID_RED>; > > + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; > > + default-state = "on"; > > + }; > > + }; > > + > > + reg_usdhc2_vmmc: regulator-usdhc2 { > > + compatible = "regulator-fixed"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; > > + regulator-name = "VSD_3V3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + }; > > +}; > > + > > +&A53_0 { > > + cpu-supply = <&buck2>; > > +}; > > + > > +&A53_1 { > > + cpu-supply = <&buck2>; > > +}; > > + > > +&A53_2 { > > + cpu-supply = <&buck2>; > > +}; > > + > > +&A53_3 { > > + cpu-supply = <&buck2>; > > +}; > > + > > +&eqos { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_eqos>; > > + phy-connection-type = "rgmii-id"; > > + phy-handle = <ðphy0>; > > + status = "okay"; > > + > > + mdio { > > + compatible = "snps,dwmac-mdio"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + ethphy0: ethernet-phy@0 { > > + compatible = "ethernet-phy-ieee802.3-c22"; > > + reg = <0>; > > + reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; > > + reset-assert-us = <20>; > > + reset-deassert-us = <200000>; > > + }; > > + }; > > +}; > > + > > +&i2c1 { > > + clock-frequency = <400000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c1>; > > + status = "okay"; > > + > > + pmic@25 { > > + reg = <0x25>; > > + compatible = "nxp,pca9450c"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_pmic>; > > + interrupt-parent = <&gpio1>; > > + interrupts = <3 IRQ_TYPE_EDGE_RISING>; > > + > > + regulators { > > + buck1: BUCK1 { > > + regulator-name = "BUCK1"; > > + regulator-min-microvolt = <600000>; > > + regulator-max-microvolt = <2187500>; > > + regulator-boot-on; > > + regulator-always-on; > > + regulator-ramp-delay = <3125>; > > + }; > > + > > + buck2: BUCK2 { > > + regulator-name = "BUCK2"; > > + regulator-min-microvolt = <600000>; > > + regulator-max-microvolt = <2187500>; > > + regulator-boot-on; > > + regulator-always-on; > > + regulator-ramp-delay = <3125>; > > + nxp,dvs-run-voltage = <950000>; > > + nxp,dvs-standby-voltage = <850000>; > > + }; > > + > > + buck4: BUCK4{ > > + regulator-name = "BUCK4"; > > + regulator-min-microvolt = <600000>; > > + regulator-max-microvolt = <3400000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + buck5: BUCK5{ > > + regulator-name = "BUCK5"; > > + regulator-min-microvolt = <600000>; > > + regulator-max-microvolt = <3400000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + buck6: BUCK6 { > > + regulator-name = "BUCK6"; > > + regulator-min-microvolt = <600000>; > > + regulator-max-microvolt = <3400000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + ldo1: LDO1 { > > + regulator-name = "LDO1"; > > + regulator-min-microvolt = <1600000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + ldo2: LDO2 { > > + regulator-name = "LDO2"; > > + regulator-min-microvolt = <800000>; > > + regulator-max-microvolt = <1150000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + ldo3: LDO3 { > > + regulator-name = "LDO3"; > > + regulator-min-microvolt = <800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + ldo4: LDO4 { > > + regulator-name = "LDO4"; > > + regulator-min-microvolt = <800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + ldo5: LDO5 { > > + regulator-name = "LDO5"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + }; > > + }; > > +}; > > + > > +&i2c2 { > > + clock-frequency = <100000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c2>; > > + status = "okay"; > > +}; > > + > > +&i2c3 { > > + clock-frequency = <400000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c3>; > > + status = "okay"; > > +}; > > + > > +&i2c4 { > > + clock-frequency = <100000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c4>; > > + status = "okay"; > > + > > + eeprom@50 { > > + compatible = "atmel,24c02"; > > + reg = <0x50>; > > + pagesize = <16>; > > + }; > > + > > + rtc@51 { > > + compatible = "haoyu,hym8563"; > > + reg = <0x51>; > > + #clock-cells = <0>; > > + clock-frequency = <32768>; > > + clock-output-names = "xin32k"; > > + interrupt-parent = <&gpio2>; > > + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_rtc_int>; > > + }; > > +}; > > + > > +&i2c6 { > > + clock-frequency = <400000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c6>; > > + status = "okay"; > > +}; > > + > > +&iomuxc { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_hog>; > > + > > + pinctrl_eqos: eqosgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 > > + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 > > + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 > > + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 > > + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 > > + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 > > + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 > > + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 > > + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f > > + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f > > + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f > > + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f > > + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f > > + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f > > + MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x1f > > + MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1f > > + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19 > > + >; > > + }; > > + > > + pinctrl_fec: fecgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 > > + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 > > + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 > > + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 > > + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 > > + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 > > + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 > > + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 > > + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f > > + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f > > + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f > > + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f > > + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f > > + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f > > + MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x1f > > + MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x1f > > + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19 > > + >; > > + }; > > + > > + pinctrl_gpio_led: gpioledgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 > > + >; > > + }; > > + > > + pinctrl_hog: hoggrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3 > > + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3 > > + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019 > > + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019 > > + >; > > + }; > > + > > + pinctrl_i2c1: i2c1grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 > > + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 > > + >; > > + }; > > + > > + pinctrl_i2c2: i2c2grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 > > + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 > > + >; > > + }; > > + > > + pinctrl_i2c3: i2c3grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 > > + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 > > + >; > > + }; > > + pinctrl_i2c4: i2c4grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 > > + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 > > + >; > > + }; > > + > > + pinctrl_i2c6: i2c6grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3 > > + MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3 > > + >; > > + }; > > + > > + pinctrl_pmic: pmicirqgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 > > + >; > > + }; > > + > > + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 > > + >; > > + }; > > + > > + pinctrl_rtc_int: rtcintgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140 > > + >; > > + }; > > + > > + pinctrl_uart2: uart2grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f > > + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f > > + >; > > + }; > > + > > + pinctrl_uart3: uart3grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49 > > + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49 > > + >; > > + }; > > + > > + pinctrl_uart4: uart4grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 > > + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 > > + >; > > + }; > > + > > + pinctrl_usb1_vbus: usb1grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19 > > + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x19 > > + >; > > + }; > > + > > + pinctrl_usdhc2: usdhc2grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 > > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 > > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 > > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 > > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 > > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 > > + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 > > + >; > > + }; > > + > > + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 > > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 > > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 > > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 > > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 > > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 > > + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 > > + >; > > + }; > > + > > + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 > > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 > > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 > > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 > > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 > > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 > > + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 > > + >; > > + }; > > + > > + pinctrl_usdhc2_gpio: usdhc2gpiogrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 > > + >; > > + }; > > + > > + pinctrl_usdhc3: usdhc3grp { > > + fsl,pins = < > > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 > > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 > > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 > > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 > > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 > > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 > > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 > > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 > > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 > > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 > > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 > > + >; > > + }; > > + > > + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 > > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 > > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 > > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 > > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 > > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 > > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 > > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 > > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 > > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 > > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 > > + >; > > + }; > > + > > + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 > > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 > > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 > > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 > > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 > > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 > > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 > > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 > > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 > > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 > > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 > > + >; > > + }; > > + > > + pinctrl_wdog: wdoggrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 > > + >; > > + }; > > +}; > > + > > +&snvs_pwrkey { > > + status = "okay"; > > +}; > > + > > +&uart2 { > > + /* console */ > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart2>; > > + status = "okay"; > > +}; > > + > > +&uart3 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart3>; > > + status = "okay"; > > +}; > > + > > +&uart4 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart4>; > > + status = "okay"; > > +}; > > + > > +/* SD Card */ > > +&usdhc2 { > > + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; > > + assigned-clock-rates = <400000000>; > > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; > > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; > > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > > + vmmc-supply = <®_usdhc2_vmmc>; > > + bus-width = <4>; > > + status = "okay"; > > +}; > > + > > +/* eMMc */ > > +&usdhc3 { > > + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; > > + assigned-clock-rates = <400000000>; > > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > > + pinctrl-0 = <&pinctrl_usdhc3>; > > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > > + bus-width = <8>; > > + non-removable; > > + status = "okay"; > > +}; > > + > > +&wdog1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_wdog>; > > + fsl,ext-reset-output; > > + status = "okay"; > > +}; > > -- > > 2.34.1 > >
Hi Daniel, One more comment. On Wed, Oct 12, 2022 at 11:21:21AM +0100, Daniel Scally wrote: > Add a device tree file describing the Debix Model A board from > Polyhex Technology Co. > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> > --- > Changes in v3 (Laurent): > > - Added IOB copyright notice > - Removed the eth node for the connector that's on the separate I/O > board > - Re-ordered some pinctrl groups so they're alphabetical > > Changes in v2: > > - Fixed the interrupt flag for i2c1/pmic@25 > - Fixed the node name for i2c4/rtc@51 (was "hym8563@51") > - Fixed a group control name that didn't match the bindings pattern > - Re-compared the rest of the DT with the EVK's .dts file to try to > make sure it complies with the way things should be, hopefully without > missing anything... > > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../dts/freescale/imx8mp-debix-model-a.dts | 529 ++++++++++++++++++ > 2 files changed, 530 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 8bf7f7ecebaa..6a33a08946ac 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > new file mode 100644 > index 000000000000..5549ceea3af6 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts > @@ -0,0 +1,529 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2019 NXP > + * Copyright 2022 Ideas on Board Oy > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/usb/pd.h> > + > +#include "imx8mp.dtsi" > + > +/ { > + model = "Polyhex Debix Model A i.MX8MPlus board"; > + compatible = "polyhex,imx8mp-debix-model-a", "fsl,imx8mp"; > + > + chosen { > + stdout-path = &uart2; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_led>; > + > + status-led { > + function = LED_FUNCTION_POWER; > + color = <LED_COLOR_ID_RED>; > + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + }; > + > + reg_usdhc2_vmmc: regulator-usdhc2 { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; > + regulator-name = "VSD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > +}; > + > +&A53_0 { > + cpu-supply = <&buck2>; > +}; > + > +&A53_1 { > + cpu-supply = <&buck2>; > +}; > + > +&A53_2 { > + cpu-supply = <&buck2>; > +}; > + > +&A53_3 { > + cpu-supply = <&buck2>; > +}; > + > +&eqos { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_eqos>; > + phy-connection-type = "rgmii-id"; > + phy-handle = <ðphy0>; > + status = "okay"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy0: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; > + reset-assert-us = <20>; > + reset-deassert-us = <200000>; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + pmic@25 { > + reg = <0x25>; > + compatible = "nxp,pca9450c"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pmic>; > + interrupt-parent = <&gpio1>; > + interrupts = <3 IRQ_TYPE_EDGE_RISING>; > + > + regulators { > + buck1: BUCK1 { > + regulator-name = "BUCK1"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <2187500>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + buck2: BUCK2 { > + regulator-name = "BUCK2"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <2187500>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + nxp,dvs-run-voltage = <950000>; > + nxp,dvs-standby-voltage = <850000>; > + }; > + > + buck4: BUCK4{ > + regulator-name = "BUCK4"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck5: BUCK5{ > + regulator-name = "BUCK5"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck6: BUCK6 { > + regulator-name = "BUCK6"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <1600000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo2: LDO2 { > + regulator-name = "LDO2"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1150000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo3: LDO3 { > + regulator-name = "LDO3"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo4: LDO4 { > + regulator-name = "LDO4"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo5: LDO5 { > + regulator-name = "LDO5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > +}; > + > +&i2c4 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c4>; > + status = "okay"; > + > + eeprom@50 { > + compatible = "atmel,24c02"; > + reg = <0x50>; > + pagesize = <16>; > + }; > + > + rtc@51 { > + compatible = "haoyu,hym8563"; > + reg = <0x51>; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "xin32k"; > + interrupt-parent = <&gpio2>; > + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rtc_int>; > + }; > +}; > + > +&i2c6 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c6>; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + pinctrl_eqos: eqosgrp { > + fsl,pins = < > + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 > + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 > + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 > + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 > + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 > + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 > + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 > + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 > + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f > + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f > + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f > + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f > + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f > + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f > + MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x1f > + MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1f > + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19 Could you align the values, either for each group, or through the whole iomuxc node ? > + >; > + }; > + > + pinctrl_fec: fecgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 > + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 > + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 > + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 > + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 > + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 > + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 > + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 > + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f > + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f > + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f > + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f > + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f > + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f > + MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x1f > + MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x1f > + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19 > + >; > + }; > + > + pinctrl_gpio_led: gpioledgrp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 > + >; > + }; > + > + pinctrl_hog: hoggrp { > + fsl,pins = < > + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3 > + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3 > + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019 > + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 > + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 > + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 > + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 > + >; > + }; > + pinctrl_i2c4: i2c4grp { > + fsl,pins = < > + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 > + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_i2c6: i2c6grp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3 > + MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_pmic: pmicirqgrp { > + fsl,pins = < > + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 > + >; > + }; > + > + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 > + >; > + }; > + > + pinctrl_rtc_int: rtcintgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f > + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49 > + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 > + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 > + >; > + }; > + > + pinctrl_usb1_vbus: usb1grp { > + fsl,pins = < > + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19 > + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x19 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 > + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 > + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 > + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 > + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 > + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 > + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 > + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 > + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_gpio: usdhc2gpiogrp { > + fsl,pins = < > + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { > + fsl,pins = < > + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 > + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 > + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 > + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 > + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 > + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 > + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 > + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 > + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 > + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 > + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 > + >; > + }; > +}; > + > +&snvs_pwrkey { > + status = "okay"; > +}; > + > +&uart2 { > + /* console */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>; > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>; > + status = "okay"; > +}; > + > +/* SD Card */ > +&usdhc2 { > + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; > + assigned-clock-rates = <400000000>; > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + vmmc-supply = <®_usdhc2_vmmc>; > + bus-width = <4>; > + status = "okay"; > +}; > + > +/* eMMc */ > +&usdhc3 { > + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; > + assigned-clock-rates = <400000000>; > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + bus-width = <8>; > + non-removable; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +};
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 8bf7f7ecebaa..6a33a08946ac 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts new file mode 100644 index 000000000000..5549ceea3af6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -0,0 +1,529 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + * Copyright 2022 Ideas on Board Oy + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> + +#include "imx8mp.dtsi" + +/ { + model = "Polyhex Debix Model A i.MX8MPlus board"; + compatible = "polyhex,imx8mp-debix-model-a", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status-led { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-connection-type = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + reset-assert-us = <20>; + reset-deassert-us = <200000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + reg = <0x25>; + compatible = "nxp,pca9450c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x1f + MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1f + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x1f + MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x1f + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_i2c6: i2c6grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL 0x400001c3 + MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 + >; + }; + + pinctrl_usb1_vbus: usb1grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19 + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +/* SD Card */ +&usdhc2 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMc */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +};