| Message ID | 20221014141509.211149-6-fabrice.gasnier@foss.st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for USB on STM32MP13 | expand |
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index de341d17e87d..291f05a958fd 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -66,6 +66,22 @@ vdd_sd: vdd-sd { regulator-max-microvolt = <2900000>; regulator-always-on; }; + + vdd_usb: vdd-usb { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v3v3_sw: v3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "v3v3_sw"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &i2c1 {
Add VDD_USB and 3V3_SW regulators on stm32mp135f-dk. Temporary add them as fixed regulators, waiting for full SCMI regulators support. This is a precursor patch to enable USB support on STM32MP13: - VDD_USB supplies the STM32MP13 USB internals - 3V3_SW supplies various peripherals, including the onboard HUB. Note: USB support requires these regulators to be enabled before entering the kernel. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> --- arch/arm/boot/dts/stm32mp135f-dk.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)