| Message ID | 20221107071511.2764628-8-Mr.Bossman075@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Clean-up and documentation for i.MXRT1050 | expand |
On Mon, Nov 7, 2022, at 08:15, Jesse Taube wrote: > Remove unused compatibles from i.MXRT1050.dtsi. > Change GPT clock-names to match documentation. > > Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> > Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Can you make sure your changelog texts explain why you do this? Are they fundamentally different from the devices you had claimed to be compatible with that need a different driver, or are there drivers in the field that bind to the wrong string first? Arnd
On 11/7/22 02:44, Arnd Bergmann wrote: > On Mon, Nov 7, 2022, at 08:15, Jesse Taube wrote: >> Remove unused compatibles from i.MXRT1050.dtsi. >> Change GPT clock-names to match documentation. >> >> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> >> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> > > Can you make sure your changelog texts explain why you do this? Yes, sorry I wasn't clear. > Are they fundamentally different from the devices you had > claimed to be compatible with that need a different driver, UART and SDHC had drivers added which are better fit. The GPT binds to imx6dl which is also the same as imx6sl. > or are there drivers in the field that bind to the wrong > string first? I don't understand? Thanks, Jesse Taube > > Arnd
On Mon, Nov 7, 2022, at 16:09, Jesse Taube wrote: > On 11/7/22 02:44, Arnd Bergmann wrote: >> On Mon, Nov 7, 2022, at 08:15, Jesse Taube wrote: >>> Remove unused compatibles from i.MXRT1050.dtsi. >>> Change GPT clock-names to match documentation. >>> >>> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> >>> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> >> >> Can you make sure your changelog texts explain why you do this? > Yes, sorry I wasn't clear. > >> Are they fundamentally different from the devices you had >> claimed to be compatible with that need a different driver, > > UART and SDHC had drivers added which are better fit. > The GPT binds to imx6dl which is also the same as imx6sl. Where are those drivers added? Looking at linux-6.1-rc2 and linux-next, I still see them use the same drivers as the original ones, and listing both strings would be the preferred method. >> or are there drivers in the field that bind to the wrong >> string first? > I don't understand? I mean if you had run into the case where you have a driver that misbehaves when the fallback string is present in addition to the most specific one. Arnd
On Mon, Nov 7, 2022 at 8:15 AM Jesse Taube <mr.bossman075@gmail.com> wrote: > Remove unused compatibles from i.MXRT1050.dtsi. > Change GPT clock-names to match documentation. > > Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> > Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> I applied patches 1-6 to the pinctrl tree, this one seems independent and possibly should not even be applied as I understand it. Yours, Linus Walleij
diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi index 03e6a858a7be..8d79de239046 100644 --- a/arch/arm/boot/dts/imxrt1050.dtsi +++ b/arch/arm/boot/dts/imxrt1050.dtsi @@ -29,7 +29,7 @@ osc3M: osc3M { soc { lpuart1: serial@40184000 { - compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imxrt1050-lpuart"; reg = <0x40184000 0x4000>; interrupts = <20>; clocks = <&clks IMXRT1050_CLK_LPUART1>; @@ -40,7 +40,6 @@ lpuart1: serial@40184000 { iomuxc: pinctrl@401f8000 { compatible = "fsl,imxrt1050-iomuxc"; reg = <0x401f8000 0x4000>; - fsl,mux_mask = <0x7>; }; anatop: anatop@400d8000 { @@ -83,7 +82,7 @@ edma1: dma-controller@400e8000 { }; usdhc1: mmc@402c0000 { - compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + compatible = "fsl,imxrt1050-usdhc"; reg = <0x402c0000 0x4000>; interrupts = <110>; clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, @@ -150,11 +149,11 @@ gpio5: gpio@400c0000 { }; gpt: timer@401ec000 { - compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt"; reg = <0x401ec000 0x4000>; interrupts = <100>; - clocks = <&osc3M>; - clock-names = "per"; + clocks = <&osc3M>, <&osc3M>; + clock-names = "ipg", "per"; }; }; };
Remove unused compatibles from i.MXRT1050.dtsi. Change GPT clock-names to match documentation. Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> --- arch/arm/boot/dts/imxrt1050.dtsi | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)