| Message ID | 20221115193244.10484-3-giulio.benetti@benettiengineering.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/4] clk: imx: imxrt1050: fix IMXRT1050_CLK_LCDIF_APB offsets | expand |
On 11/15/22 14:32, Giulio Benetti wrote: > According to i.MXRT1050 Datasheet usdhc supports up to 200Mhz clock so > let's increase max-frequency property to 200Mhz. > > Cc: Jesse Taube <mr.bossman075@gmail.com> > Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> > --- > V1->V2: > * set max-frequency to 200Mhz instead of removing it as suggested by > Bough Chen > --- > arch/arm/boot/dts/imxrt1050.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi > index 114465e4dde6..5b1991c32748 100644 > --- a/arch/arm/boot/dts/imxrt1050.dtsi > +++ b/arch/arm/boot/dts/imxrt1050.dtsi > @@ -93,7 +93,7 @@ usdhc1: mmc@402c0000 { > bus-width = <4>; > fsl,wp-controller; > no-1-8-v; > - max-frequency = <4000000>; > + max-frequency = <200000000>; > fsl,tuning-start-tap = <20>; > fsl,tuning-step = <2>; > status = "disabled"; Acked-by: Jesse Taube <mr.bossman075@gmail.com>
diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi index 114465e4dde6..5b1991c32748 100644 --- a/arch/arm/boot/dts/imxrt1050.dtsi +++ b/arch/arm/boot/dts/imxrt1050.dtsi @@ -93,7 +93,7 @@ usdhc1: mmc@402c0000 { bus-width = <4>; fsl,wp-controller; no-1-8-v; - max-frequency = <4000000>; + max-frequency = <200000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; status = "disabled";
According to i.MXRT1050 Datasheet usdhc supports up to 200Mhz clock so let's increase max-frequency property to 200Mhz. Cc: Jesse Taube <mr.bossman075@gmail.com> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> --- V1->V2: * set max-frequency to 200Mhz instead of removing it as suggested by Bough Chen --- arch/arm/boot/dts/imxrt1050.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)