diff mbox series

[6/8] dt-bindings: soc: socionext: Add UniPhier ADAMV block

Message ID 20221129103509.9958-7-hayashi.kunihiko@socionext.com (mailing list archive)
State New, archived
Headers show
Series dt-bidnings: soc: Introduce UniPhier miscelaneous register blocks | expand

Commit Message

Kunihiko Hayashi Nov. 29, 2022, 10:35 a.m. UTC
Add devicetree binding schema for the ADAMV block implemented on Socionext
Uniphier SoCs.

The ADAMV block is analog signal amplifier that is a part of the external
video and audio I/O system. This block is implemented on LD11 and LD20,
and this is defined for controlling audio I/O reset only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../socionext/socionext,uniphier-adamv.yaml   | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml

Comments

Rob Herring (Arm) Nov. 29, 2022, 1:32 p.m. UTC | #1
On Tue, 29 Nov 2022 19:35:07 +0900, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the ADAMV block implemented on Socionext
> Uniphier SoCs.
> 
> The ADAMV block is analog signal amplifier that is a part of the external
> video and audio I/O system. This block is implemented on LD11 and LD20,
> and this is defined for controlling audio I/O reset only.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../socionext/socionext,uniphier-adamv.yaml   | 52 +++++++++++++++++++
>  1 file changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.example.dtb: adamv@57920000: 'reset' does not match any of the regexes: '^reset-controller(@[0-9a-f]+)?$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221129103509.9958-7-hayashi.kunihiko@socionext.com

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
new file mode 100644
index 000000000000..ae806960b3f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
@@ -0,0 +1,52 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-adamv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier ADAMV block
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  ADAMV block implemented on Socionext UniPhier SoCs is an analog signal
+  amplifier that is a part of the external video and audio I/O system.
+
+  This block is defined for controlling audio I/O reset only.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld11-adamv
+          - socionext,uniphier-ld20-adamv
+          - socionext,uniphier-adamv
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^reset-controller(@[0-9a-f]+)?$":
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@57920000 {
+        compatible = "socionext,uniphier-ld20-adamv",
+                     "simple-mfd", "syscon";
+        reg = <0x57920000 0x1000>;
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-adamv-reset";
+            #reset-cells = <1>;
+        };
+    };