diff mbox series

[4/7] arm64: dts: imx8mn-tqma8mqnl: Fix temperature sensor compatible

Message ID 20221207124205.1373202-4-alexander.stein@ew.tq-group.com (mailing list archive)
State New, archived
Headers show
Series [1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible | expand

Commit Message

Alexander Stein Dec. 7, 2022, 12:42 p.m. UTC 
Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
index 48b965386e879..391ca5516e4c5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -77,8 +77,8 @@  &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};