| Message ID | 20230102144848.3135398-1-alexander.stein@ew.tq-group.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/5] arm64: dts: tqma8mpql: Fix temperature sensor compatible | expand |
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 25cbe333ab8f..34b62d8c76a0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -510,9 +510,8 @@ tlv320aic3x04: audio-codec@18 { ldoin-supply = <®_vcc_3v3>; }; - /* NXP SE97BTP with temperature sensor + eeprom */ - se97_1c: temperature-sensor-eeprom@1c { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + se97_1c: temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1c>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi index 7bd680a926ce..ebc29a950ba9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi @@ -63,9 +63,8 @@ &i2c1 { sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - /* NXP SE97BTP with temperature sensor + eeprom */ - se97: temperature-sensor-eeprom@1b { - compatible = "nxp,se97", "jedec,jc-42.4-temp"; + se97: temperature-sensor@1b { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1b>; };
Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip. While at it, fix the node name according to device tree spec recommendations. The EEPROM is a separate node anyway. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- Changes in v2: * Split into arm64-only series arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++--- arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi | 5 ++--- 2 files changed, 4 insertions(+), 6 deletions(-)