| Message ID | 20230106163746.439717-6-herve.codina@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add the PowerQUICC audio support using the QMC | expand |
On 06/01/2023 17:37, Herve Codina wrote: > Add support for the QMC (QUICC Multichannel Controller) > available in some PowerQUICC SoC such as MPC885 or MPC866. > > Signed-off-by: Herve Codina <herve.codina@bootlin.com> > --- > .../bindings/soc/fsl/cpm_qe/fsl,qmc.yaml | 167 ++++++++++++++++++ > 1 file changed, 167 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml > > diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml > new file mode 100644 > index 000000000000..caf71f3a3f3f > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml > @@ -0,0 +1,167 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qmc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: PowerQUICC CPM QUICC Multichannel Controller (QMC) > + > +maintainers: > + - Herve Codina <herve.codina@bootlin.com> > + > +description: | > + The QMC (QUICC Multichannel Controller) emulates up to 64 channels within > + one serial controller using the same TDM physical interface routed from > + TSA. > + > +properties: > + compatible: > + items: > + - enum: > + - fsl,mpc885-scc-qmc > + - fsl,mpc866-scc-qmc > + - const: fsl,cpm1-scc-qmc > + > + reg: > + items: > + - description: SCC (Serial communication controller) register base > + - description: SCC parameter ram base > + - description: Dual port ram base > + > + reg-names: > + items: > + - const: scc_regs > + - const: scc_pram > + - const: dpram > + > + interrupts: > + description: SCC interrupt line in the CPM interrupt controller Missing constraints. > + > + fsl,cpm-command: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Cf. soc/fsl/cpm_qe/cpm.txt Missing description. > + > + tsa: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: phandle to the TSA Missing vendor prefix. Does not look like a generic property. > + > + tsa-cell-id: > + enum: [1, 2, 3] > + description: | > + TSA cell ID (dt-bindings/soc/fsl-tsa.h defines these values) > + - 1: SCC2 > + - 2: SCC3 > + - 3: SCC4 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + '#chan-cells': > + const: 1 > + > +patternProperties: > + "^channel@([0-9]|[1-5][0-9]|6[0-3])$": > + description: > + A channel managed by this controller > + type: object > + > + properties: > + reg: > + minimum: 0 > + maximum: 63 > + description: > + The channel number > + > + fsl,mode: > + $ref: /schemas/types.yaml#/definitions/string > + enum: [transparent, hdlc] > + default: transparent > + description: Operational mode And what do they mean? > + > + fsl,reverse-data: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + The bit order as seen on the channels is reversed, > + transmitting/receiving the MSB of each octet first. > + This flag is used only in 'transparent' mode. > + > + tx-ts-mask: Missing vendor prefix. > + $ref: /schemas/types.yaml#/definitions/uint64 > + description: > + Channel assigned Tx time-slots within the Tx time-slots routed > + by the TSA to this cell. > + > + rx-ts-mask: > + $ref: /schemas/types.yaml#/definitions/uint64 > + description: > + Channel assigned Rx time-slots within the Rx time-slots routed > + by the TSA to this cell. > + > + required: > + - reg > + - tx-ts-mask > + - rx-ts-mask > + > +required: > + - compatible > + - reg > + - reg-names > + - interrupts > + - tsa > + - tsa-cell-id > + - '#address-cells' > + - '#size-cells' > + - '#chan-cells' > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/soc/fsl-tsa.h> > + > + scc_qmc@a60 { No underscores in node names. Node names should be generic. https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "fsl,mpc885-scc-qmc", "fsl,cpm1-scc-qmc"; > + reg = <0xa60 0x20>, > + <0x3f00 0xc0>, > + <0x2000 0x1000>; > + reg-names = "scc_regs", "scc_pram", "dpram"; > + interrupts = <27>; > + interrupt-parent = <&CPM_PIC>; > + fsl,cpm-command = <0xc0>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + #chan-cells = <1>; > + > + tsa = <&tsa>; > + tsa-cell-id = <FSL_CPM_TSA_SCC4>; > + > + channel@16 { > + /* Ch16 : First 4 even TS from all routed from TSA */ > + reg = <16>; > + fsl,mode = "transparent"; > + fsl,reverse-data; > + tx-ts-mask = <0x00000000 0x000000AA>; > + rx-ts-mask = <0x00000000 0x000000AA>; Keep case consistent. lower-case hex. Best regards, Krzysztof
Hi Krzysztof, On Sun, 8 Jan 2023 16:14:47 +0100 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: [...] > > + > > + interrupts: > > + description: SCC interrupt line in the CPM interrupt controller > > Missing constraints. 'maxItems: 1' will be added in v3 > > > + > > + fsl,cpm-command: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: Cf. soc/fsl/cpm_qe/cpm.txt > > Missing description. 'fsl,cpm-command' will be removed in v3. The value needed is determined based on other information. This is not needed in the DT. > > > + > > + tsa: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: phandle to the TSA > > Missing vendor prefix. Does not look like a generic property. Will be be changed to 'fsl,tsa' and also 'tsa-cell-id' will be changed to 'fsl,tsa-cell-id' > [...] > > + > > +patternProperties: > > + "^channel@([0-9]|[1-5][0-9]|6[0-3])$": > > + description: > > + A channel managed by this controller > > + type: object > > + > > + properties: > > + reg: > > + minimum: 0 > > + maximum: 63 > > + description: > > + The channel number > > + > > + fsl,mode: > > + $ref: /schemas/types.yaml#/definitions/string > > + enum: [transparent, hdlc] > > + default: transparent > > + description: Operational mode > > And what do they mean? I will change with description: | The channel operational mode - hdlc: The channel handles HDLC frames - transparent: The channel handles raw data without any processing > > > + > > + fsl,reverse-data: > > + $ref: /schemas/types.yaml#/definitions/flag > > + description: > > + The bit order as seen on the channels is reversed, > > + transmitting/receiving the MSB of each octet first. > > + This flag is used only in 'transparent' mode. > > + > > + tx-ts-mask: > > Missing vendor prefix. Will be added, also on rx-ts-mask. > > > + $ref: /schemas/types.yaml#/definitions/uint64 > > + description: > > + Channel assigned Tx time-slots within the Tx time-slots routed > > + by the TSA to this cell. > > + > > + rx-ts-mask: > > + $ref: /schemas/types.yaml#/definitions/uint64 > > + description: > > + Channel assigned Rx time-slots within the Rx time-slots routed > > + by the TSA to this cell. > > + > > + required: > > + - reg > > + - tx-ts-mask > > + - rx-ts-mask > > + > > +required: > > + - compatible > > + - reg > > + - reg-names > > + - interrupts > > + - tsa > > + - tsa-cell-id > > + - '#address-cells' > > + - '#size-cells' > > + - '#chan-cells' > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/soc/fsl-tsa.h> > > + > > + scc_qmc@a60 { > > No underscores in node names. > > Node names should be generic. > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation Will be changed to qmc@a60 > > > + compatible = "fsl,mpc885-scc-qmc", "fsl,cpm1-scc-qmc"; > > + reg = <0xa60 0x20>, > > + <0x3f00 0xc0>, > > + <0x2000 0x1000>; > > + reg-names = "scc_regs", "scc_pram", "dpram"; > > + interrupts = <27>; > > + interrupt-parent = <&CPM_PIC>; > > + fsl,cpm-command = <0xc0>; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + #chan-cells = <1>; > > + > > + tsa = <&tsa>; > > + tsa-cell-id = <FSL_CPM_TSA_SCC4>; > > + > > + channel@16 { > > + /* Ch16 : First 4 even TS from all routed from TSA */ > > + reg = <16>; > > + fsl,mode = "transparent"; > > + fsl,reverse-data; > > + tx-ts-mask = <0x00000000 0x000000AA>; > > + rx-ts-mask = <0x00000000 0x000000AA>; > > Keep case consistent. lower-case hex. Will be fixed > > Best regards, > Krzysztof > Thanks for the review, Best regards, Hervé
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml new file mode 100644 index 000000000000..caf71f3a3f3f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM QUICC Multichannel Controller (QMC) + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: | + The QMC (QUICC Multichannel Controller) emulates up to 64 channels within + one serial controller using the same TDM physical interface routed from + TSA. + +properties: + compatible: + items: + - enum: + - fsl,mpc885-scc-qmc + - fsl,mpc866-scc-qmc + - const: fsl,cpm1-scc-qmc + + reg: + items: + - description: SCC (Serial communication controller) register base + - description: SCC parameter ram base + - description: Dual port ram base + + reg-names: + items: + - const: scc_regs + - const: scc_pram + - const: dpram + + interrupts: + description: SCC interrupt line in the CPM interrupt controller + + fsl,cpm-command: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Cf. soc/fsl/cpm_qe/cpm.txt + + tsa: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the TSA + + tsa-cell-id: + enum: [1, 2, 3] + description: | + TSA cell ID (dt-bindings/soc/fsl-tsa.h defines these values) + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#chan-cells': + const: 1 + +patternProperties: + "^channel@([0-9]|[1-5][0-9]|6[0-3])$": + description: + A channel managed by this controller + type: object + + properties: + reg: + minimum: 0 + maximum: 63 + description: + The channel number + + fsl,mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [transparent, hdlc] + default: transparent + description: Operational mode + + fsl,reverse-data: + $ref: /schemas/types.yaml#/definitions/flag + description: + The bit order as seen on the channels is reversed, + transmitting/receiving the MSB of each octet first. + This flag is used only in 'transparent' mode. + + tx-ts-mask: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + Channel assigned Tx time-slots within the Tx time-slots routed + by the TSA to this cell. + + rx-ts-mask: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + Channel assigned Rx time-slots within the Rx time-slots routed + by the TSA to this cell. + + required: + - reg + - tx-ts-mask + - rx-ts-mask + +required: + - compatible + - reg + - reg-names + - interrupts + - tsa + - tsa-cell-id + - '#address-cells' + - '#size-cells' + - '#chan-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/fsl-tsa.h> + + scc_qmc@a60 { + compatible = "fsl,mpc885-scc-qmc", "fsl,cpm1-scc-qmc"; + reg = <0xa60 0x20>, + <0x3f00 0xc0>, + <0x2000 0x1000>; + reg-names = "scc_regs", "scc_pram", "dpram"; + interrupts = <27>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0xc0>; + + #address-cells = <1>; + #size-cells = <0>; + #chan-cells = <1>; + + tsa = <&tsa>; + tsa-cell-id = <FSL_CPM_TSA_SCC4>; + + channel@16 { + /* Ch16 : First 4 even TS from all routed from TSA */ + reg = <16>; + fsl,mode = "transparent"; + fsl,reverse-data; + tx-ts-mask = <0x00000000 0x000000AA>; + rx-ts-mask = <0x00000000 0x000000AA>; + }; + + channel@17 { + /* Ch17 : First 4 odd TS from all routed from TSA */ + reg = <17>; + fsl,mode = "transparent"; + fsl,reverse-data; + tx-ts-mask = <0x00000000 0x00000055>; + rx-ts-mask = <0x00000000 0x00000055>; + }; + + channel@19 { + /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */ + reg = <19>; + fsl,mode = "hdlc"; + tx-ts-mask = <0x00000000 0x0000FF00>; + rx-ts-mask = <0x00000000 0x0000FF00>; + }; + };
Add support for the QMC (QUICC Multichannel Controller) available in some PowerQUICC SoC such as MPC885 or MPC866. Signed-off-by: Herve Codina <herve.codina@bootlin.com> --- .../bindings/soc/fsl/cpm_qe/fsl,qmc.yaml | 167 ++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qmc.yaml