diff mbox series

[6/6] nvmem: u-boot-env: post process "ethaddr" env variable

Message ID 20230110105425.13188-6-zajec5@gmail.com (mailing list archive)
State Superseded
Headers show
Series [1/6] nvmem: core: add nvmem_dev_size() helper | expand

Commit Message

Rafał Miłecki Jan. 10, 2023, 10:54 a.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

U-Boot environment variables are stored in ASCII format so "ethaddr"
requires parsing into binary to make it work with Ethernet interfaces.

This includes support for indexes to support #nvmem-cell-cells = <1>.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/nvmem/layouts/Kconfig      |  1 +
 drivers/nvmem/layouts/u-boot-env.c | 24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+)

Comments

Michael Walle Jan. 10, 2023, 12:19 p.m. UTC | #1 
Hi,

Am 2023-01-10 11:54, schrieb Rafał Miłecki:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> U-Boot environment variables are stored in ASCII format so "ethaddr"
> requires parsing into binary to make it work with Ethernet interfaces.
> 
> This includes support for indexes to support #nvmem-cell-cells = <1>.
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
>  drivers/nvmem/layouts/Kconfig      |  1 +
>  drivers/nvmem/layouts/u-boot-env.c | 24 ++++++++++++++++++++++++
>  2 files changed, 25 insertions(+)
> 
> diff --git a/drivers/nvmem/layouts/Kconfig 
> b/drivers/nvmem/layouts/Kconfig
> index 8a38c514943a..566b4f25630d 100644
> --- a/drivers/nvmem/layouts/Kconfig
> +++ b/drivers/nvmem/layouts/Kconfig
> @@ -23,6 +23,7 @@ config NVMEM_LAYOUT_ONIE_TLV
>  config NVMEM_LAYOUT_U_BOOT_ENV
>  	bool "U-Boot environment variables support"
>  	select CRC32
> +	select GENERIC_NET_UTILS
>  	help
>  	  U-Boot stores its setup as environment variables. This driver adds
>  	  support for verifying & exporting such data. It also exposes 
> variables
> diff --git a/drivers/nvmem/layouts/u-boot-env.c
> b/drivers/nvmem/layouts/u-boot-env.c
> index 95c314553952..63baeb18bd56 100644
> --- a/drivers/nvmem/layouts/u-boot-env.c
> +++ b/drivers/nvmem/layouts/u-boot-env.c
> @@ -4,6 +4,8 @@
>   */
> 
>  #include <linux/crc32.h>
> +#include <linux/etherdevice.h>
> +#include <linux/if_ether.h>
>  #include <linux/mod_devicetable.h>
>  #include <linux/module.h>
>  #include <linux/nvmem-consumer.h>
> @@ -36,6 +38,26 @@ struct u_boot_env_image_broadcom {
>  	uint8_t data[];
>  } __packed;
> 
> +static int u_boot_env_read_post_process_ethaddr(void *context, const
> char *id, int index,
> +						unsigned int offset, void *data, size_t *bytes)
> +{
> +	u8 mac[ETH_ALEN];
> +
> +	if (*bytes != 3 * ETH_ALEN - 1)
> +		return -EINVAL;
> +
> +	if (!mac_pton(data, mac))
> +		return -EINVAL;
> +
> +	if (index)
> +		eth_addr_add(mac, index);
> +
> +	ether_addr_copy(data, mac);
> +	*bytes = ETH_ALEN;

I don't know how to feel about this. This will only work if the new
size is smaller than the old one. Can't we have a correct size in
the first place? I.e. while adding the cells.

-michael

> +
> +	return 0;
> +}
> +
>  static int u_boot_env_parse_data(struct device *dev, struct
> nvmem_device *nvmem, uint8_t *buf,
>  				 size_t data_offset, size_t data_len)
>  {
> @@ -67,6 +89,8 @@ static int u_boot_env_parse_data(struct device *dev,
> struct nvmem_device *nvmem,
>  		info.offset = data_offset + value - data;
>  		info.bytes = strlen(value);
>  		info.np = of_get_child_by_name(np, info.name);
> +		if (!strcmp(var, "ethaddr"))
> +			info.read_post_process = u_boot_env_read_post_process_ethaddr;
> 
>  		err = nvmem_add_one_cell(nvmem, &info);
>  		if (err) {
Rafał Miłecki Jan. 10, 2023, 12:41 p.m. UTC | #2 
On 10.01.2023 13:19, Michael Walle wrote:
> Hi,
> 
> Am 2023-01-10 11:54, schrieb Rafał Miłecki:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> U-Boot environment variables are stored in ASCII format so "ethaddr"
>> requires parsing into binary to make it work with Ethernet interfaces.
>>
>> This includes support for indexes to support #nvmem-cell-cells = <1>.
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>>  drivers/nvmem/layouts/Kconfig      |  1 +
>>  drivers/nvmem/layouts/u-boot-env.c | 24 ++++++++++++++++++++++++
>>  2 files changed, 25 insertions(+)
>>
>> diff --git a/drivers/nvmem/layouts/Kconfig b/drivers/nvmem/layouts/Kconfig
>> index 8a38c514943a..566b4f25630d 100644
>> --- a/drivers/nvmem/layouts/Kconfig
>> +++ b/drivers/nvmem/layouts/Kconfig
>> @@ -23,6 +23,7 @@ config NVMEM_LAYOUT_ONIE_TLV
>>  config NVMEM_LAYOUT_U_BOOT_ENV
>>      bool "U-Boot environment variables support"
>>      select CRC32
>> +    select GENERIC_NET_UTILS
>>      help
>>        U-Boot stores its setup as environment variables. This driver adds
>>        support for verifying & exporting such data. It also exposes variables
>> diff --git a/drivers/nvmem/layouts/u-boot-env.c
>> b/drivers/nvmem/layouts/u-boot-env.c
>> index 95c314553952..63baeb18bd56 100644
>> --- a/drivers/nvmem/layouts/u-boot-env.c
>> +++ b/drivers/nvmem/layouts/u-boot-env.c
>> @@ -4,6 +4,8 @@
>>   */
>>
>>  #include <linux/crc32.h>
>> +#include <linux/etherdevice.h>
>> +#include <linux/if_ether.h>
>>  #include <linux/mod_devicetable.h>
>>  #include <linux/module.h>
>>  #include <linux/nvmem-consumer.h>
>> @@ -36,6 +38,26 @@ struct u_boot_env_image_broadcom {
>>      uint8_t data[];
>>  } __packed;
>>
>> +static int u_boot_env_read_post_process_ethaddr(void *context, const
>> char *id, int index,
>> +                        unsigned int offset, void *data, size_t *bytes)
>> +{
>> +    u8 mac[ETH_ALEN];
>> +
>> +    if (*bytes != 3 * ETH_ALEN - 1)
>> +        return -EINVAL;
>> +
>> +    if (!mac_pton(data, mac))
>> +        return -EINVAL;
>> +
>> +    if (index)
>> +        eth_addr_add(mac, index);
>> +
>> +    ether_addr_copy(data, mac);
>> +    *bytes = ETH_ALEN;
> 
> I don't know how to feel about this. This will only work if the new
> size is smaller than the old one. Can't we have a correct size in
> the first place? I.e. while adding the cells.

I didn't think about such solution. I like that idea. Will do.
diff mbox series

Patch

diff --git a/drivers/nvmem/layouts/Kconfig b/drivers/nvmem/layouts/Kconfig
index 8a38c514943a..566b4f25630d 100644
--- a/drivers/nvmem/layouts/Kconfig
+++ b/drivers/nvmem/layouts/Kconfig
@@ -23,6 +23,7 @@  config NVMEM_LAYOUT_ONIE_TLV
 config NVMEM_LAYOUT_U_BOOT_ENV
 	bool "U-Boot environment variables support"
 	select CRC32
+	select GENERIC_NET_UTILS
 	help
 	  U-Boot stores its setup as environment variables. This driver adds
 	  support for verifying & exporting such data. It also exposes variables
diff --git a/drivers/nvmem/layouts/u-boot-env.c b/drivers/nvmem/layouts/u-boot-env.c
index 95c314553952..63baeb18bd56 100644
--- a/drivers/nvmem/layouts/u-boot-env.c
+++ b/drivers/nvmem/layouts/u-boot-env.c
@@ -4,6 +4,8 @@ 
  */
 
 #include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
@@ -36,6 +38,26 @@  struct u_boot_env_image_broadcom {
 	uint8_t data[];
 } __packed;
 
+static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, int index,
+						unsigned int offset, void *data, size_t *bytes)
+{
+	u8 mac[ETH_ALEN];
+
+	if (*bytes != 3 * ETH_ALEN - 1)
+		return -EINVAL;
+
+	if (!mac_pton(data, mac))
+		return -EINVAL;
+
+	if (index)
+		eth_addr_add(mac, index);
+
+	ether_addr_copy(data, mac);
+	*bytes = ETH_ALEN;
+
+	return 0;
+}
+
 static int u_boot_env_parse_data(struct device *dev, struct nvmem_device *nvmem, uint8_t *buf,
 				 size_t data_offset, size_t data_len)
 {
@@ -67,6 +89,8 @@  static int u_boot_env_parse_data(struct device *dev, struct nvmem_device *nvmem,
 		info.offset = data_offset + value - data;
 		info.bytes = strlen(value);
 		info.np = of_get_child_by_name(np, info.name);
+		if (!strcmp(var, "ethaddr"))
+			info.read_post_process = u_boot_env_read_post_process_ethaddr;
 
 		err = nvmem_add_one_cell(nvmem, &info);
 		if (err) {