diff mbox series

[v2] ARM: dts: stm32: Fix User button on stm32mp135f-dk

Message ID 20230116115727.1121169-1-amelie.delaunay@foss.st.com (mailing list archive)
State New, archived
Headers show
Series [v2] ARM: dts: stm32: Fix User button on stm32mp135f-dk | expand

Commit Message

Amelie Delaunay Jan. 16, 2023, 11:57 a.m. UTC 
This patch fixes the following dtbs_check warning on stm32mp135f-dk:
arch/arm/boot/dts/stm32mp135f-dk.dtb: gpio-keys: 'user-pa13' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml

It renames user-pa13 node into button-user so that it matches gpio-keys
bindings.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
 arch/arm/boot/dts/stm32mp135f-dk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Alexandre TORGUE Jan. 17, 2023, 11:20 a.m. UTC | #1 
Hi Amélie

On 1/16/23 12:57, Amelie Delaunay wrote:
> This patch fixes the following dtbs_check warning on stm32mp135f-dk:
> arch/arm/boot/dts/stm32mp135f-dk.dtb: gpio-keys: 'user-pa13' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
>  From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml
> 
> It renames user-pa13 node into button-user so that it matches gpio-keys
> bindings.
> 
> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
> ---
>   arch/arm/boot/dts/stm32mp135f-dk.dts | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
> index 9ff5a3eaf55b..931877d6ddb9 100644
> --- a/arch/arm/boot/dts/stm32mp135f-dk.dts
> +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
> @@ -40,7 +40,7 @@ optee@dd000000 {
>   	gpio-keys {
>   		compatible = "gpio-keys";
>   
> -		user-pa13 {
> +		button-user {
>   			label = "User-PA13";
>   			linux,code = <BTN_1>;
>   			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;


Thanks for the cleaning. Applied on stm32-next.

Thanks.
Alex
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index 9ff5a3eaf55b..931877d6ddb9 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -40,7 +40,7 @@  optee@dd000000 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pa13 {
+		button-user {
 			label = "User-PA13";
 			linux,code = <BTN_1>;
 			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;