| Message ID | 20230120224627.4053418-4-quic_eberman@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Drivers for gunyah hypervisor | expand |
On Fri, Jan 20, 2023 at 02:46:02PM -0800, Elliot Berman wrote: > Add architecture-independent standard error codes, types, and macros for > Gunyah hypercalls. > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> > --- > MAINTAINERS | 1 + > include/linux/gunyah.h | 74 ++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 75 insertions(+) > create mode 100644 include/linux/gunyah.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index d9205cb9e988..f1e07e39b2f5 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9048,6 +9048,7 @@ L: linux-arm-msm@vger.kernel.org > S: Supported > F: Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml > F: Documentation/virt/gunyah/ > +F: include/linux/gunyah.h > > HABANALABS PCI DRIVER > M: Oded Gabbay <ogabbay@kernel.org> > diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h > new file mode 100644 > index 000000000000..985c6086348e > --- /dev/null > +++ b/include/linux/gunyah.h > @@ -0,0 +1,74 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#ifndef _LINUX_GUNYAH_H > +#define _LINUX_GUNYAH_H > + > +#include <linux/errno.h> > +#include <linux/limits.h> > + > +/* Common Gunyah macros */ Macros? > +#define GH_CAPID_INVAL U64_MAX > +#define GH_VMID_ROOT_VM 0xff These are all simple defines :) > + > +#define GH_ERROR_OK 0 > + > +#define GH_ERROR_UNIMPLEMENTED -1 > +#define GH_ERROR_RETRY -2 All of these values, they come from the hypervisor? And then you: > +static inline int gh_remap_error(int gh_error) > +{ > + switch (gh_error) { > + case GH_ERROR_OK: > + return 0; > + case GH_ERROR_NOMEM: > + return -ENOMEM; > + case GH_ERROR_DENIED: > + case GH_ERROR_CSPACE_CAP_NULL: > + case GH_ERROR_CSPACE_CAP_REVOKED: > + case GH_ERROR_CSPACE_WRONG_OBJ_TYPE: > + case GH_ERROR_CSPACE_INSUF_RIGHTS: > + case GH_ERROR_CSPACE_FULL: > + return -EACCES; > + case GH_ERROR_BUSY: > + case GH_ERROR_IDLE: > + return -EBUSY; > + case GH_ERROR_IRQ_BOUND: > + case GH_ERROR_IRQ_UNBOUND: > + case GH_ERROR_MSGQUEUE_FULL: > + case GH_ERROR_MSGQUEUE_EMPTY: > + return -EPERM; > + default: > + return -EINVAL; > + } > +} Convert it to a Linux-kernel related value? If so, please say that in the documentation here (where the value came from, etc...) Also, why isn't gh_error an enumerated type so you can have some type safety and it's obvious when a value comes from the hypervisor what it should be and should not be. thanks, greg k-h
diff --git a/MAINTAINERS b/MAINTAINERS index d9205cb9e988..f1e07e39b2f5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9048,6 +9048,7 @@ L: linux-arm-msm@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml F: Documentation/virt/gunyah/ +F: include/linux/gunyah.h HABANALABS PCI DRIVER M: Oded Gabbay <ogabbay@kernel.org> diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h new file mode 100644 index 000000000000..985c6086348e --- /dev/null +++ b/include/linux/gunyah.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _LINUX_GUNYAH_H +#define _LINUX_GUNYAH_H + +#include <linux/errno.h> +#include <linux/limits.h> + +/* Common Gunyah macros */ +#define GH_CAPID_INVAL U64_MAX +#define GH_VMID_ROOT_VM 0xff + +#define GH_ERROR_OK 0 + +#define GH_ERROR_UNIMPLEMENTED -1 +#define GH_ERROR_RETRY -2 + +#define GH_ERROR_ARG_INVAL 1 +#define GH_ERROR_ARG_SIZE 2 +#define GH_ERROR_ARG_ALIGN 3 + +#define GH_ERROR_NOMEM 10 + +#define GH_ERROR_ADDR_OVFL 20 +#define GH_ERROR_ADDR_UNFL 21 +#define GH_ERROR_ADDR_INVAL 22 + +#define GH_ERROR_DENIED 30 +#define GH_ERROR_BUSY 31 +#define GH_ERROR_IDLE 32 + +#define GH_ERROR_IRQ_BOUND 40 +#define GH_ERROR_IRQ_UNBOUND 41 + +#define GH_ERROR_CSPACE_CAP_NULL 50 +#define GH_ERROR_CSPACE_CAP_REVOKED 51 +#define GH_ERROR_CSPACE_WRONG_OBJ_TYPE 52 +#define GH_ERROR_CSPACE_INSUF_RIGHTS 53 +#define GH_ERROR_CSPACE_FULL 54 + +#define GH_ERROR_MSGQUEUE_EMPTY 60 +#define GH_ERROR_MSGQUEUE_FULL 61 + +static inline int gh_remap_error(int gh_error) +{ + switch (gh_error) { + case GH_ERROR_OK: + return 0; + case GH_ERROR_NOMEM: + return -ENOMEM; + case GH_ERROR_DENIED: + case GH_ERROR_CSPACE_CAP_NULL: + case GH_ERROR_CSPACE_CAP_REVOKED: + case GH_ERROR_CSPACE_WRONG_OBJ_TYPE: + case GH_ERROR_CSPACE_INSUF_RIGHTS: + case GH_ERROR_CSPACE_FULL: + return -EACCES; + case GH_ERROR_BUSY: + case GH_ERROR_IDLE: + return -EBUSY; + case GH_ERROR_IRQ_BOUND: + case GH_ERROR_IRQ_UNBOUND: + case GH_ERROR_MSGQUEUE_FULL: + case GH_ERROR_MSGQUEUE_EMPTY: + return -EPERM; + default: + return -EINVAL; + } +} + +#endif