@@ -88,6 +88,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -119,6 +125,19 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0",
+ "brcm,bcmbca-hsspi";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
@@ -66,6 +66,12 @@ apb_clk: apb_clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
/* ARM bus */
@@ -203,6 +209,19 @@ serial1: serial@620 {
status = "disabled";
};
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0",
+ "brcm,bcmbca-hsspi";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
nand_controller: nand-controller@2000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -60,6 +60,12 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <50000000>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
psci {
@@ -100,5 +106,18 @@ uart0: serial@600 {
clock-names = "refclk";
status = "disabled";
};
+
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0",
+ "brcm,bcmbca-hsspi";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
};
};
@@ -71,6 +71,7 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
@@ -78,6 +79,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -109,6 +116,19 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0",
+ "brcm,bcmbca-hsspi";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
@@ -88,6 +88,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -119,6 +125,20 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1",
+ "brcm,bcmbca-hsspi";
+ reg = <0x1000 0x600>, <0x2610 0x4>;
+ reg-names = "hsspi", "spim-ctrl";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
@@ -61,6 +61,12 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
psci {
@@ -100,5 +106,18 @@ uart0: serial@640 {
clock-names = "refclk";
status = "disabled";
};
+
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0",
+ "brcm,bcmbca-hsspi";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
};
};
@@ -78,6 +78,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -109,6 +115,20 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1",
+ "brcm,bcmbca-hsspi";
+ reg = <0x1000 0x600>, <0x2610 0x4>;
+ reg-names = "hsspi", "spim-ctrl";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
@@ -61,6 +61,7 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
@@ -68,6 +69,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -100,6 +107,19 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0",
+ "brcm,bcmbca-hsspi";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -25,3 +25,7 @@ memory@0 {
&serial0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -50,3 +50,7 @@ &ahci {
&sata_phy {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
Add support for HSSPI controller in ARMv7 chip dts files. Signed-off-by: William Zhang <william.zhang@broadcom.com> --- Changes in v2: - Update compatible string with SoC model number, controller version info and bcmbca fall back name - Add interrupt property arch/arm/boot/dts/bcm47622.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/bcm63138.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/bcm63148.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/bcm63178.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/bcm6756.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/bcm6846.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/bcm6855.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/bcm6878.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/bcm947622.dts | 4 ++++ arch/arm/boot/dts/bcm963138.dts | 4 ++++ arch/arm/boot/dts/bcm963138dvt.dts | 4 ++++ arch/arm/boot/dts/bcm963148.dts | 4 ++++ arch/arm/boot/dts/bcm963178.dts | 4 ++++ arch/arm/boot/dts/bcm96756.dts | 4 ++++ arch/arm/boot/dts/bcm96846.dts | 4 ++++ arch/arm/boot/dts/bcm96855.dts | 4 ++++ arch/arm/boot/dts/bcm96878.dts | 4 ++++ 17 files changed, 192 insertions(+)