| Message ID | 20230131101323.606931-1-alexander.stein@ew.tq-group.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/1] dt-bindings: iio: adc: add missing vref-supply | expand |
Hi Alexander, On 23-01-31, Alexander Stein wrote: > Although this property is used right now for IIO_CHAN_INFO_SCALE, > this ADC has two internal reference voltages, which the driver currently > doesn't make use of. > > Fixes: db73419d8c06 ("dt-bindings: iio: adc: Add binding documentation for NXP IMX8QXP ADC") > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > .../devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > index 63369ba388e4..879768af0303 100644 > --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > @@ -39,6 +39,9 @@ properties: > power-domains: > maxItems: 1 > > + vref-supply: > + description: External ADC reference voltage supply on VREFH pad. Please add it to the list of required properties, we can remove it as soon as the driver has support for the internal reference voltages. Regards, Marco > + > "#io-channel-cells": > const: 1 > > @@ -72,6 +75,7 @@ examples: > assigned-clocks = <&clk IMX_SC_R_ADC_0>; > assigned-clock-rates = <24000000>; > power-domains = <&pd IMX_SC_R_ADC_0>; > + vref-supply = <®_1v8>; > #io-channel-cells = <1>; > }; > }; > -- > 2.34.1 > > >
Hi Marco, thanks for the feedback. Am Dienstag, 31. Januar 2023, 11:48:16 CET schrieb Marco Felsch: > Hi Alexander, > > On 23-01-31, Alexander Stein wrote: > > Although this property is used right now for IIO_CHAN_INFO_SCALE, > > this ADC has two internal reference voltages, which the driver currently > > doesn't make use of. > > > > Fixes: db73419d8c06 ("dt-bindings: iio: adc: Add binding documentation for > > NXP IMX8QXP ADC") Signed-off-by: Alexander Stein > > <alexander.stein@ew.tq-group.com> > > --- > > > > .../devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml index > > 63369ba388e4..879768af0303 100644 > > --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > > @@ -39,6 +39,9 @@ properties: > > power-domains: > > maxItems: 1 > > > > + vref-supply: > > + description: External ADC reference voltage supply on VREFH pad. > > Please add it to the list of required properties, we can remove it as > soon as the driver has support for the internal reference voltages. I was thinking in doing so before as well. But DT describes the hardware, and this ADC apparently would be functioning without a reference voltage on that pad, using a different one. What the driver actual does is a different matter. Best regards, Alexander > Regards, > Marco > > > + > > > > "#io-channel-cells": > > const: 1 > > > > @@ -72,6 +75,7 @@ examples: > > assigned-clocks = <&clk IMX_SC_R_ADC_0>; > > assigned-clock-rates = <24000000>; > > power-domains = <&pd IMX_SC_R_ADC_0>; > > > > + vref-supply = <®_1v8>; > > > > #io-channel-cells = <1>; > > > > }; > > > > };
Hi Alexander, On Tue, Jan 31, 2023 at 7:13 AM Alexander Stein <alexander.stein@ew.tq-group.com> wrote: > > Although this property is used right now for IIO_CHAN_INFO_SCALE, > this ADC has two internal reference voltages, which the driver currently > doesn't make use of. > > Fixes: db73419d8c06 ("dt-bindings: iio: adc: Add binding documentation for NXP IMX8QXP ADC") > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> In the Subject, it would be better to mention imx8qxp-adc. dt-bindings: iio: imx8qxp-adc: add missing vref-supply
Hi Fabio, Am Dienstag, 31. Januar 2023, 13:16:11 CET schrieb Fabio Estevam: > Hi Alexander, > > On Tue, Jan 31, 2023 at 7:13 AM Alexander Stein > > <alexander.stein@ew.tq-group.com> wrote: > > Although this property is used right now for IIO_CHAN_INFO_SCALE, > > this ADC has two internal reference voltages, which the driver currently > > doesn't make use of. > > > > Fixes: db73419d8c06 ("dt-bindings: iio: adc: Add binding documentation for > > NXP IMX8QXP ADC") Signed-off-by: Alexander Stein > > <alexander.stein@ew.tq-group.com> > > In the Subject, it would be better to mention imx8qxp-adc. > > dt-bindings: iio: imx8qxp-adc: add missing vref-supply Nice, that's a good idea. Will change it. Thanks and best regards, Alexander
Hi Alexander, On 23-01-31, Alexander Stein wrote: > Hi Marco, > > thanks for the feedback. > > Am Dienstag, 31. Januar 2023, 11:48:16 CET schrieb Marco Felsch: > > Hi Alexander, > > > > On 23-01-31, Alexander Stein wrote: > > > Although this property is used right now for IIO_CHAN_INFO_SCALE, > > > this ADC has two internal reference voltages, which the driver currently > > > doesn't make use of. > > > > > > Fixes: db73419d8c06 ("dt-bindings: iio: adc: Add binding documentation for > > > NXP IMX8QXP ADC") Signed-off-by: Alexander Stein > > > <alexander.stein@ew.tq-group.com> > > > --- > > > > > > .../devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml | 4 ++++ > > > 1 file changed, 4 insertions(+) > > > > > > diff --git > > > a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml index > > > 63369ba388e4..879768af0303 100644 > > > --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > > > > @@ -39,6 +39,9 @@ properties: > > > power-domains: > > > maxItems: 1 > > > > > > + vref-supply: > > > + description: External ADC reference voltage supply on VREFH pad. > > > > Please add it to the list of required properties, we can remove it as > > soon as the driver has support for the internal reference voltages. > > I was thinking in doing so before as well. But DT describes the hardware, and > this ADC apparently would be functioning without a reference voltage on that > pad, using a different one. What the driver actual does is a different matter. I have also thought about it first but than I checked the RM which says that "multi-reference selection" is chip dependent. Regards, Marco > > Best regards, > Alexander > > > Regards, > > Marco > > > > > + > > > > > > "#io-channel-cells": > > > const: 1 > > > > > > @@ -72,6 +75,7 @@ examples: > > > assigned-clocks = <&clk IMX_SC_R_ADC_0>; > > > assigned-clock-rates = <24000000>; > > > power-domains = <&pd IMX_SC_R_ADC_0>; > > > > > > + vref-supply = <®_1v8>; > > > > > > #io-channel-cells = <1>; > > > > > > }; > > > > > > }; > > > > >
On Wed, 1 Feb 2023 13:13:43 +0100 Marco Felsch <m.felsch@pengutronix.de> wrote: > Hi Alexander, > > On 23-01-31, Alexander Stein wrote: > > Hi Marco, > > > > thanks for the feedback. > > > > Am Dienstag, 31. Januar 2023, 11:48:16 CET schrieb Marco Felsch: > > > Hi Alexander, > > > > > > On 23-01-31, Alexander Stein wrote: > > > > Although this property is used right now for IIO_CHAN_INFO_SCALE, > > > > this ADC has two internal reference voltages, which the driver currently > > > > doesn't make use of. > > > > > > > > Fixes: db73419d8c06 ("dt-bindings: iio: adc: Add binding documentation for > > > > NXP IMX8QXP ADC") Signed-off-by: Alexander Stein > > > > <alexander.stein@ew.tq-group.com> > > > > --- > > > > > > > > .../devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml | 4 ++++ > > > > 1 file changed, 4 insertions(+) > > > > > > > > diff --git > > > > a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > > b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml index > > > > 63369ba388e4..879768af0303 100644 > > > > --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > > +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > > > > > > @@ -39,6 +39,9 @@ properties: > > > > power-domains: > > > > maxItems: 1 > > > > > > > > + vref-supply: > > > > + description: External ADC reference voltage supply on VREFH pad. > > > > > > Please add it to the list of required properties, we can remove it as > > > soon as the driver has support for the internal reference voltages. > > > > I was thinking in doing so before as well. But DT describes the hardware, and > > this ADC apparently would be functioning without a reference voltage on that > > pad, using a different one. What the driver actual does is a different matter. > > I have also thought about it first but than I checked the RM which says > that "multi-reference selection" is chip dependent. Oh goody. So is it detectable? If we are going to stick to a single compatible rather than adding them for the variants with and without this feature, should probably add a note at least to say it is required for some parts. Also, link if public would be good for purposes of discussion as my google fu didn't find relevant doc. (assuming it's public) Jonathan > > Regards, > Marco > > > > > > Best regards, > > Alexander > > > > > Regards, > > > Marco > > > > > > > + > > > > > > > > "#io-channel-cells": > > > > const: 1 > > > > > > > > @@ -72,6 +75,7 @@ examples: > > > > assigned-clocks = <&clk IMX_SC_R_ADC_0>; > > > > assigned-clock-rates = <24000000>; > > > > power-domains = <&pd IMX_SC_R_ADC_0>; > > > > > > > > + vref-supply = <®_1v8>; > > > > > > > > #io-channel-cells = <1>; > > > > > > > > }; > > > > > > > > }; > > > > > > > > > >
Hi, Am Donnerstag, 2. Februar 2023, 18:10:52 CET schrieb Jonathan Cameron: > On Wed, 1 Feb 2023 13:13:43 +0100 > > Marco Felsch <m.felsch@pengutronix.de> wrote: > > Hi Alexander, > > > > On 23-01-31, Alexander Stein wrote: > > > Hi Marco, > > > > > > thanks for the feedback. > > > > > > Am Dienstag, 31. Januar 2023, 11:48:16 CET schrieb Marco Felsch: > > > > Hi Alexander, > > > > > > > > On 23-01-31, Alexander Stein wrote: > > > > > Although this property is used right now for IIO_CHAN_INFO_SCALE, > > > > > this ADC has two internal reference voltages, which the driver > > > > > currently > > > > > doesn't make use of. > > > > > > > > > > Fixes: db73419d8c06 ("dt-bindings: iio: adc: Add binding > > > > > documentation for > > > > > NXP IMX8QXP ADC") Signed-off-by: Alexander Stein > > > > > <alexander.stein@ew.tq-group.com> > > > > > --- > > > > > > > > > > .../devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml | 4 > > > > > ++++ > > > > > 1 file changed, 4 insertions(+) > > > > > > > > > > diff --git > > > > > a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > > > b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > > > index > > > > > 63369ba388e4..879768af0303 100644 > > > > > --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > > > +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml > > > > > > > > > > @@ -39,6 +39,9 @@ properties: > > > > > power-domains: > > > > > maxItems: 1 > > > > > > > > > > + vref-supply: > > > > > + description: External ADC reference voltage supply on VREFH > > > > > pad. > > > > > > > > Please add it to the list of required properties, we can remove it as > > > > soon as the driver has support for the internal reference voltages. > > > > > > I was thinking in doing so before as well. But DT describes the > > > hardware, and this ADC apparently would be functioning without a > > > reference voltage on that pad, using a different one. What the driver > > > actual does is a different matter.> > > I have also thought about it first but than I checked the RM which says > > that "multi-reference selection" is chip dependent. Nice for pointing this out. I wasn't aware that there are differences. > Oh goody. So is it detectable? That's my problem. I didn't find any source of information which chips do support multiple references and which don't. Marco, do you have some information on this? > If we are going to stick to a single compatible rather than adding them for > the variants with and without this feature, should probably add a note at > least to say it is required for some parts. That's a good idea. I'm okay with that, until there is more information available. Best regards Alexander > Also, link if public would be good for purposes of discussion as my google > fu didn't find relevant doc. (assuming it's public) > > > Jonathan > > > Regards, > > > > Marco > > > > > Best regards, > > > Alexander > > > > > > > Regards, > > > > > > > > Marco > > > > > > > > > + > > > > > > > > > > "#io-channel-cells": > > > > > const: 1 > > > > > > > > > > @@ -72,6 +75,7 @@ examples: > > > > > assigned-clocks = <&clk IMX_SC_R_ADC_0>; > > > > > assigned-clock-rates = <24000000>; > > > > > power-domains = <&pd IMX_SC_R_ADC_0>; > > > > > > > > > > + vref-supply = <®_1v8>; > > > > > > > > > > #io-channel-cells = <1>; > > > > > > > > > > }; > > > > > > > > > > };
Hi, On 23-02-03, Alexander Stein wrote: ... > > > > > > + vref-supply: > > > > > > + description: External ADC reference voltage supply on VREFH > > > > > > pad. > > > > > > > > > > Please add it to the list of required properties, we can remove it as > > > > > soon as the driver has support for the internal reference voltages. > > > > > > > > I was thinking in doing so before as well. But DT describes the > > > > hardware, and this ADC apparently would be functioning without a > > > > reference voltage on that pad, using a different one. What the driver > > > > actual does is a different matter.> > > > I have also thought about it first but than I checked the RM which says > > > that "multi-reference selection" is chip dependent. > > Nice for pointing this out. I wasn't aware that there are differences. > > > Oh goody. So is it detectable? > > That's my problem. I didn't find any source of information which chips do > support multiple references and which don't. > Marco, do you have some information on this? You can download the RM from the NXP website but you need an account for it: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/i-mx-applications-processors/i-mx-8-applications-processors/i-mx-8-family-arm-cortex-a53-cortex-a72-virtualization-vision-3d-graphics-4k-video:i.MX8 Or is this the wrong model? The naming scheme is quite confusing to me. > > If we are going to stick to a single compatible rather than adding them for > > the variants with and without this feature, should probably add a note at > > least to say it is required for some parts. > > That's a good idea. I'm okay with that, until there is more information > available. According the RM there is a bit which can be read: Multi Vref Implemented (MVI). Regards, Marco
Am Freitag, 3. Februar 2023, 15:12:17 CET schrieb Marco Felsch: > Hi, > > On 23-02-03, Alexander Stein wrote: > > ... > > > > > > > > + vref-supply: > > > > > > > + description: External ADC reference voltage supply on VREFH > > > > > > > pad. > > > > > > > > > > > > Please add it to the list of required properties, we can remove it > > > > > > as > > > > > > soon as the driver has support for the internal reference > > > > > > voltages. > > > > > > > > > > I was thinking in doing so before as well. But DT describes the > > > > > hardware, and this ADC apparently would be functioning without a > > > > > reference voltage on that pad, using a different one. What the > > > > > driver > > > > > actual does is a different matter.> > > > > > > > > I have also thought about it first but than I checked the RM which > > > > says > > > > that "multi-reference selection" is chip dependent. > > > > Nice for pointing this out. I wasn't aware that there are differences. > > > > > Oh goody. So is it detectable? > > > > That's my problem. I didn't find any source of information which chips do > > support multiple references and which don't. > > Marco, do you have some information on this? > > You can download the RM from the NXP website but you need an account for > it: > https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/ > i-mx-applications-processors/i-mx-8-applications-processors/i-mx-8-family-ar > m-cortex-a53-cortex-a72-virtualization-vision-3d-graphics-4k-video:i.MX8 > > Or is this the wrong model? The naming scheme is quite confusing to me. That's i.MX8 (imx8qm), the bindings are for i.MX8X (imx8qxp/imx8dxp). But I assume the ADC is similar/identical. > > > If we are going to stick to a single compatible rather than adding them > > > for > > > the variants with and without this feature, should probably add a note > > > at > > > least to say it is required for some parts. > > > > That's a good idea. I'm okay with that, until there is more information > > available. > > According the RM there is a bit which can be read: Multi Vref > Implemented (MVI). Ah, nice. So there is a hardware feature. From the RM I have available it is set for both imx8qm and imx8qxp. Given that I will not mark this as required, but add a comment regarding this feature bit. Best regards, Alexander > Regards, > Marco
HI Alexander, On 23-02-03, Alexander Stein wrote: > Am Freitag, 3. Februar 2023, 15:12:17 CET schrieb Marco Felsch: > > Hi, > > > > On 23-02-03, Alexander Stein wrote: > > > > ... > > > > > > > > > > + vref-supply: > > > > > > > > + description: External ADC reference voltage supply on VREFH > > > > > > > > pad. > > > > > > > > > > > > > > Please add it to the list of required properties, we can remove it > > > > > > > as > > > > > > > soon as the driver has support for the internal reference > > > > > > > voltages. > > > > > > > > > > > > I was thinking in doing so before as well. But DT describes the > > > > > > hardware, and this ADC apparently would be functioning without a > > > > > > reference voltage on that pad, using a different one. What the > > > > > > driver > > > > > > actual does is a different matter.> > > > > > > > > > > I have also thought about it first but than I checked the RM which > > > > > says > > > > > that "multi-reference selection" is chip dependent. > > > > > > Nice for pointing this out. I wasn't aware that there are differences. > > > > > > > Oh goody. So is it detectable? > > > > > > That's my problem. I didn't find any source of information which chips do > > > support multiple references and which don't. > > > Marco, do you have some information on this? > > > > You can download the RM from the NXP website but you need an account for > > it: > > https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/ > > i-mx-applications-processors/i-mx-8-applications-processors/i-mx-8-family-ar > > m-cortex-a53-cortex-a72-virtualization-vision-3d-graphics-4k-video:i.MX8 > > > > Or is this the wrong model? The naming scheme is quite confusing to me. > > That's i.MX8 (imx8qm), the bindings are for i.MX8X (imx8qxp/imx8dxp). But I > assume the ADC is similar/identical. > > > > > If we are going to stick to a single compatible rather than adding them > > > > for > > > > the variants with and without this feature, should probably add a note > > > > at > > > > least to say it is required for some parts. > > > > > > That's a good idea. I'm okay with that, until there is more information > > > available. > > > > According the RM there is a bit which can be read: Multi Vref > > Implemented (MVI). > > Ah, nice. So there is a hardware feature. From the RM I have available it is > set for both imx8qm and imx8qxp. Given that I will not mark this as required, > but add a comment regarding this feature bit. Can you check the comments about the refsel please? Since this is the important part. Since the RM above states that this bit will indicate a multiref device but it can also the case that, you have a chip with just on ref selection option (external). I can't check this since I don't have the RM for this. @NXP can you give us more information please? Regards, Marco
Hi Marco, Am Samstag, 4. Februar 2023, 01:13:33 CET schrieb Marco Felsch: > HI Alexander, > > On 23-02-03, Alexander Stein wrote: > > Am Freitag, 3. Februar 2023, 15:12:17 CET schrieb Marco Felsch: > > > Hi, > > > > > > On 23-02-03, Alexander Stein wrote: > > > > > > ... > > > > > > > > > > > > + vref-supply: > > > > > > > > > + description: External ADC reference voltage supply on > > > > > > > > > VREFH > > > > > > > > > pad. > > > > > > > > > > > > > > > > Please add it to the list of required properties, we can > > > > > > > > remove it > > > > > > > > as > > > > > > > > soon as the driver has support for the internal reference > > > > > > > > voltages. > > > > > > > > > > > > > > I was thinking in doing so before as well. But DT describes the > > > > > > > hardware, and this ADC apparently would be functioning without a > > > > > > > reference voltage on that pad, using a different one. What the > > > > > > > driver > > > > > > > actual does is a different matter.> > > > > > > > > > > > > I have also thought about it first but than I checked the RM which > > > > > > says > > > > > > that "multi-reference selection" is chip dependent. > > > > > > > > Nice for pointing this out. I wasn't aware that there are differences. > > > > > > > > > Oh goody. So is it detectable? > > > > > > > > That's my problem. I didn't find any source of information which chips > > > > do > > > > support multiple references and which don't. > > > > Marco, do you have some information on this? > > > > > > You can download the RM from the NXP website but you need an account for > > > it: > > > https://www.nxp.com/products/processors-and-microcontrollers/arm-process > > > ors/ > > > i-mx-applications-processors/i-mx-8-applications-processors/i-mx-8-fami > > > ly-ar > > > m-cortex-a53-cortex-a72-virtualization-vision-3d-graphics-4k-video:i.MX > > > 8 > > > > > > Or is this the wrong model? The naming scheme is quite confusing to me. > > > > That's i.MX8 (imx8qm), the bindings are for i.MX8X (imx8qxp/imx8dxp). But > > I > > assume the ADC is similar/identical. > > > > > > > If we are going to stick to a single compatible rather than adding > > > > > them > > > > > for > > > > > the variants with and without this feature, should probably add a > > > > > note > > > > > at > > > > > least to say it is required for some parts. > > > > > > > > That's a good idea. I'm okay with that, until there is more > > > > information > > > > available. > > > > > > According the RM there is a bit which can be read: Multi Vref > > > Implemented (MVI). > > > > Ah, nice. So there is a hardware feature. From the RM I have available it > > is set for both imx8qm and imx8qxp. Given that I will not mark this as > > required, but add a comment regarding this feature bit. > > Can you check the comments about the refsel please? Since this is the > important part. Since the RM above states that this bit will indicate a > multiref device but it can also the case that, you have a chip with just > on ref selection option (external). I can't check this since I don't > have the RM for this. @NXP can you give us more information please? I would assume if MVI is 0 REFSEL should be considered reserved. Both imx8qm and imx8qxp have MVI set, even imx1170 has this bit set. So I am not aware of any SoC with MVI not being set. Best regards, Alexander
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml index 63369ba388e4..879768af0303 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml @@ -39,6 +39,9 @@ properties: power-domains: maxItems: 1 + vref-supply: + description: External ADC reference voltage supply on VREFH pad. + "#io-channel-cells": const: 1 @@ -72,6 +75,7 @@ examples: assigned-clocks = <&clk IMX_SC_R_ADC_0>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_ADC_0>; + vref-supply = <®_1v8>; #io-channel-cells = <1>; }; };
Although this property is used right now for IIO_CHAN_INFO_SCALE, this ADC has two internal reference voltages, which the driver currently doesn't make use of. Fixes: db73419d8c06 ("dt-bindings: iio: adc: Add binding documentation for NXP IMX8QXP ADC") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- .../devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml | 4 ++++ 1 file changed, 4 insertions(+)