From patchwork Wed Feb 1 20:33:35 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Stefan Wahren X-Patchwork-Id: 13124941 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E096AC636D4 for ; Wed, 1 Feb 2023 20:36:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=9N00giGWFzdW4uKmAU4mGed4cQsn7BScZw5oq9efoWw=; b=dEowjzW146ZWcO itoW4Bpel4uGGAYvukDabjaForvRSW0clpiTAtipGK7cB2K/bH0ls9Tnrl+0eqMsx2Y3VfOEtQvhn TTKIqIyD/l0v6GYqmD8f7c577Bzy2E49KHt7/RsRUet9DLchNt+EOzdjoiFa72gy35+YpMH9eTB2l yR4hUd880KviD5qtKZg2TExu8nxp3gYoSmcSKkx6ApEkaex6RZBh0JcrohvW5IqbXAhoWnQgFAJ5d 0JwMeNTP6VEwnx9pwS4MUSdJywUI0oEhw5rboCNHhBOjevsrAHZOH5jYbalOiSa+OPptVqP8k6zYB jve2Xi87V2y8rGr7izVQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1pNJp6-00DXni-9W; Wed, 01 Feb 2023 20:35:16 +0000 Received: from mout.kundenserver.de ([212.227.126.187]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1pNJoJ-00DXVq-2q for linux-arm-kernel@lists.infradead.org; Wed, 01 Feb 2023 20:34:30 +0000 Received: from stefanw-SCHENKER ([37.4.248.41]) by mrelayeu.kundenserver.de (mreue010 [212.227.15.167]) with ESMTPSA (Nemesis) id 1MYehP-1p9pXd1fmt-00Ve3l; Wed, 01 Feb 2023 21:34:18 +0100 From: Stefan Wahren To: Rob Herring , Krzysztof Kozlowski , Shawn Guo , Sascha Hauer , Fabio Estevam Cc: linux-imx@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Stefan Wahren , Michael Heimpold Subject: [PATCH 6/9] ARM: dts: imx28-duckbill-2: Include base board Date: Wed, 1 Feb 2023 21:33:35 +0100 Message-Id: <20230201203338.9525-7-stefan.wahren@i2se.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230201203338.9525-1-stefan.wahren@i2se.com> References: <20230201203338.9525-1-stefan.wahren@i2se.com> MIME-Version: 1.0 X-Provags-ID: V03:K1:s1ChDoKQxipAdzPN9rbByn8heT+sbOXgpxAJecAYpAh1q5SoRZr dX1gzrqD35R3M/caxufdpWLLEBbeLz5Cq6snnAWjWsOOt9gd0odaXnjrYUJ1FX5w83JfSWk PwNWeLnaomzYCqxJ06CdgmnZjcDDBMISP54+eq8Nz+/XCkNG9tPdB+F+tf4dfAr4h7UetWH 5K5ku3h41sd3E6HliroBA== UI-OutboundReport: notjunk:1;M01:P0:lLcQeMJNqSU=;e+1TSAfTflX3B2dUhja94zcyMij yNfsIc9WMUr5cMKte2nLjKvWENjRzLNSHv7MiNj+/cWrM/K7cVyWiNRSVIHJXAcFihAZH1TW2 RWTiKtEGLAEscJdMtY2CXo8RqTr57Xbc0rFPw4j7Ff+56PVg/gurwv2ZWLKIgCqvupvoaRSkn SaRbp0w4YoAS1ZVICm/hRZaF5I+j9PyZfeCYxfQy5iwSUMJFXjjAo8wOCpt/Gi67yOAMGlGi5 9XYDFV8XGWcA5fjETEXiouPmIVVF3IhWZP29KDvhCCrCAz+oWP9BHjRrSkKlLc8DC5G12t/xn MqW6AL8nW6hP42k1pOVCIq0dWRhVStjs9GBIEvEhhu41NFw4t8BCYowhmWq9IAjeaEz1wAhdE ojbmh191tDQUkYdI1RSuseKJRxLprmXkIex9zWpTVmPNImEKMty0mcCbp5k+bVIH8VHWyVemn A9naA7UTsA2SqpqGvMhHW4/mLVac590sxZr4ivmTuwchJTjjU2EJ2Asoi479O672LFZDfuVHp 0Dzm22izdzFzixt+0kONhFpsvkQvc3MslATadGuFnn9FJCvMfCp2NNCFy+fo21fF8DqkY0yMF 1V+cI1KzLisVyj1x3STnDaxPOdDSZNb7a4JDNs019rFcPBZgxZFrZY/AB5aZWeFMZkUXwr9By 4310buxN+GwKAENJ/QgNSMMbs5sqUzE2gqGT71D7hg== X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230201_123427_452028_8E5E0964 X-CRM114-Status: GOOD ( 14.84 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org All additional I2SE Duckbill 2 variants always have the same base board in common. So consider this by including the base board and avoid a lot of redundancy. Special care needs to be taken of the SPI variant. ssp2 is used as SD card interface on the base board, but on the SPI variant it's downgrade to a SPI interface to connect the QCA7000. So the SD card properties must be deleted. Signed-off-by: Stefan Wahren Cc: Michael Heimpold --- arch/arm/boot/dts/imx28-duckbill-2-485.dts | 174 ++------------- .../arm/boot/dts/imx28-duckbill-2-enocean.dts | 198 +++------------- arch/arm/boot/dts/imx28-duckbill-2-spi.dts | 211 ++++-------------- 3 files changed, 81 insertions(+), 502 deletions(-) diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts index d451fa018d83..b73020ff1053 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -5,172 +5,13 @@ */ /dts-v1/; -#include -#include -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 485"; compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - rs485-red { label = "duckbill:red:rs485"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -182,3 +23,16 @@ rs485-green { }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 73f521c46c1e..473d99b9b42f 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -5,184 +5,14 @@ */ /dts-v1/; -#include #include -#include -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 EnOcean"; compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_AUART0_CTS__GPIO_3_2 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - enocean_button: enocean-button@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - enocean-blue { label = "duckbill:blue:enocean"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -211,3 +41,29 @@ key-enocean { }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_AUART0_CTS__GPIO_3_2 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; + +&pinctrl { + enocean_button: enocean-button@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts index 0e8be5975709..859d97a5a775 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -5,9 +5,7 @@ */ /dts-v1/; -#include -#include -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 SPI"; @@ -16,179 +14,50 @@ / { aliases { ethernet1 = &qca7000; }; +}; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - qca7000: ethernet@0 { - reg = <0>; - compatible = "qca,qca7000"; - pinctrl-names = "default"; - pinctrl-0 = <&qca7000_pins>; - interrupt-parent = <&gpio3>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - spi-cpha; - spi-cpol; - spi-max-frequency = <8000000>; - }; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - led_pins: led@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - qca7000_pins: qca7000@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ - MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ - MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ - MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ - MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ - MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; +&auart0 { + status = "disabled"; +}; - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; +&i2c0 { + status = "disabled"; +}; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; +&pinctrl { + qca7000_pins: qca7000@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ + MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ + MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ + MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ + MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ + MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; }; +}; - leds { - compatible = "gpio-leds"; +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + /delete-property/ bus-width; + /delete-property/ vmmc-supply; + status = "okay"; + + qca7000: ethernet@0 { + reg = <0>; + compatible = "qca,qca7000"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; + pinctrl-0 = <&qca7000_pins>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <8000000>; }; };