new file mode 100644
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC CPM QUICC Multichannel Controller (QMC)
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+description:
+ The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one
+ serial controller using the same TDM physical interface routed from TSA.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,mpc885-scc-qmc
+ - fsl,mpc866-scc-qmc
+ - const: fsl,cpm1-scc-qmc
+
+ reg:
+ items:
+ - description: SCC (Serial communication controller) register base
+ - description: SCC parameter ram base
+ - description: Dual port ram base
+
+ reg-names:
+ items:
+ - const: scc_regs
+ - const: scc_pram
+ - const: dpram
+
+ interrupts:
+ maxItems: 1
+ description: SCC interrupt line in the CPM interrupt controller
+
+ fsl,tsa-serial:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to TSA node
+ - enum: [1, 2, 3]
+ description: |
+ TSA serial interface (dt-bindings/soc/cpm1-fsl,tsa.h defines these
+ values)
+ - 1: SCC2
+ - 2: SCC3
+ - 3: SCC4
+ description:
+ Should be a phandle/number pair. The phandle to TSA node and the TSA
+ serial interface to use.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ '^channel@([0-9]|[1-5][0-9]|6[0-3])$':
+ description:
+ A channel managed by this controller
+ type: object
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 63
+ description:
+ The channel number
+
+ fsl,operational-mode:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [transparent, hdlc]
+ default: transparent
+ description: |
+ The channel operational mode
+ - hdlc: The channel handles HDLC frames
+ - transparent: The channel handles raw data without any processing
+
+ fsl,reverse-data:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The bit order as seen on the channels is reversed,
+ transmitting/receiving the MSB of each octet first.
+ This flag is used only in 'transparent' mode.
+
+ fsl,tx-ts-mask:
+ $ref: /schemas/types.yaml#/definitions/uint64
+ description:
+ Channel assigned Tx time-slots within the Tx time-slots routed by the
+ TSA to this cell.
+
+ fsl,rx-ts-mask:
+ $ref: /schemas/types.yaml#/definitions/uint64
+ description:
+ Channel assigned Rx time-slots within the Rx time-slots routed by the
+ TSA to this cell.
+
+ required:
+ - reg
+ - fsl,tx-ts-mask
+ - fsl,rx-ts-mask
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - fsl,tsa-serial
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/cpm1-fsl,tsa.h>
+
+ qmc@a60 {
+ compatible = "fsl,mpc885-scc-qmc", "fsl,cpm1-scc-qmc";
+ reg = <0xa60 0x20>,
+ <0x3f00 0xc0>,
+ <0x2000 0x1000>;
+ reg-names = "scc_regs", "scc_pram", "dpram";
+ interrupts = <27>;
+ interrupt-parent = <&CPM_PIC>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsl,tsa-serial = <&tsa FSL_CPM_TSA_SCC4>;
+
+ channel@16 {
+ /* Ch16 : First 4 even TS from all routed from TSA */
+ reg = <16>;
+ fsl,mode = "transparent";
+ fsl,reverse-data;
+ fsl,tx-ts-mask = <0x00000000 0x000000aa>;
+ fsl,rx-ts-mask = <0x00000000 0x000000aa>;
+ };
+
+ channel@17 {
+ /* Ch17 : First 4 odd TS from all routed from TSA */
+ reg = <17>;
+ fsl,mode = "transparent";
+ fsl,reverse-data;
+ fsl,tx-ts-mask = <0x00000000 0x00000055>;
+ fsl,rx-ts-mask = <0x00000000 0x00000055>;
+ };
+
+ channel@19 {
+ /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */
+ reg = <19>;
+ fsl,mode = "hdlc";
+ fsl,tx-ts-mask = <0x00000000 0x0000ff00>;
+ fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
+ };
+ };